AMT58x-PN ProfiNET®
The Topology Editor dialog box will appear on the screen.
As the PROFINET IO system has already been set up and the
PROFINET devices connected (to connect the port of the IO
controller and the port of the IO device see on page 109), they do not
need to be first of all interconnected to a topology within the project.
So in the Table view tabbed page you will see the configured
PROFINET devices and ports currently connected in the system.
The Interconnection table in the left area of the page lists all the
configured PROFINET devices with their ports. The Selection range
group box in the top right section lists all the PROFINET devices that
are available for the topological interconnection.
Figure 53 - Topology Editor: Table view
93