Figure 42 - Setting Pip For Standard Telegram Ios - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
Double click the Standard Telegram slot 1.2 of the module to open
the telegrams properties dialog box. The Properties – Standard
Telegram property sheet will appear. Enter the Addresses tabbed
page and set the process image of the isochronous submodule as
PIP 1. Select the PIP1 value in the drop-down menu of the Process
image items in both Inputs and Outputs group boxes.
Confirm pressing the OK button.
NOTE
For more information on PIPs (Process Image Partitions) refer to the
section "11.5 PIP (Process Image Partition)".

Figure 42 - Setting PIP for Standard Telegram IOs

80