Figure 52 - Entering The Topology Editor - Datalogic AMT58*-PN Series Instruction Manual

Profinet absolute encoders

Table of Contents

AMT58x-PN ProfiNET®

11.7 Topology Editor

Using the Topology Editor you can topologically configure your

PROFINET IO system. The topology editor has a series of functions

for setting, interconnecting and diagnosing the properties of all

PROFINET devices including their ports. So it supports you in the

following tasks:

 obtaining topology information about all ports of the

PROFINET devices in the project;



configuring the set topology on PROFINET by interconnecting

the interfaces and ports by simply dragging and dropping and

establishing properties.

Enter the Topology Editor dialog box to edit the topology of your

Profinet-IO System. To do so select and right-click the Profinet-IO

system in the HW Config window and then press the PROFINET IO

Topology... command in the shortcut menu.

Figure 52 - Entering the Topology Editor

Table of Contents