Figure 34 - Setting The Not Synchronized Role Of The Io Controller - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
11.2.1 Setting an anisochronous communication
To configure the IO controller (Figure 34) double click the PN-IO slot
X2 to open the PN-IO properties dialog box. The Properties – PN-IO
property sheet will appear. Enter the Synchronization tabbed page
and select the Not synchronized value in the drop-down menu of the
Synchronization role item. Confirm pressing the OK button.

Figure 34 - Setting the Not synchronized role of the IO controller

72