Figure 81 - Identification & Maintenance Page - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
For further information on the parameters shown in this page refer to
the sections "9.2 Index 0xB02E : supported PROFIdrive specific
parameters" on page 59 and "9.3 Index 0xB02E : supported encoder
specific parameters" .
Figure 81 - Identification & Maintenance page
Please note in this page the Vendor ID, the Order ID, the Serial
number, the Hardware version and the Software version are listed.
117