Figure 40 - Ob61: Assigning Io Device In Isochronous Mode - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
Now set the encoder in isochronous mode.
To do this double click the Interface slot X1 of the module to open the
interface properties dialog box.
The Properties – Interface property sheet will appear. Enter the IO
cycle tabbed page and select the OB61 value in the drop-down menu
of the Assign IO device in isochronous mode item.
For further information see also the section "11.4 OB61".

Figure 40 - OB61: assigning IO device in isochronous mode

78