Figure 37 - Setting The Sync Slave Role Of The Io Device - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
To configure the IO device (Figure 35) double click the Interface slot
X1 of the module to open the interface properties dialog box.
The Properties – Interface property sheet will appear.
Enter the Synchronization tabbed page and select the Sync slave
value in the drop-down menu of the Synchronization role item; select
the High performance value in the drop-down menu of the IRT option
item. Confirm pressing the OK button.

Figure 37 - Setting the sync slave role of the IO device

75