Class 4 Functionality - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®

Class 4 functionality

For any information on the implemented Application Classes refer to
the section "6.3 Application Class definition" on page 64.
If it is enabled, Code
Scaling function control
G1_XIST2 and G1_XIST3. However the preset will not affect the
position value in G1_XIST1 if the parameter
control is disabled; it will always affect G1_XIST2 and G1_XIST3
instead.
Attribute Meaning
Code
Disable control
control
Code
Enable control
control
G1_XIST1 preset control
This parameter is available only if
This parameter controls the effect of a preset on the G1_XIST1
actual value. When it is enabled, Preset will affect the position value
in G1_XIST1.
Attribute Meaning
G1_XIST1 is affected by a Preset
Enable
command
Disable Preset does not affect G1_XIST1
WARNING
G1_XIST1 preset control
NOTE
There is no functionality of this parameter if the
functionality parameter is disabled.
EXAMPLE
An example of setting the Preset value is provided on page 105.
60
sequence, G1_XIST1 preset control
affect the position value in G1_XIST1,
sequence, G1_XIST1 preset
and Scaling function
disabled
sequence, G1_XIST1 preset
and Scaling function
enabled
Class 4 functionality
is disabled by setting the value 1.
and
G1_XIST1 preset
Value
0
1
is enabled.
Value
0
1
Class 4