Table of Contents
Advertisement
8. in the Remote host text box type the IP address of the
encoder you need to update; leave the Remote port box
unchanged;
9.
to start the upgrade press the Upgrade FW button;
Figure 90 - Starting the firmware upgrade operation
WARNING
Before installation always ascertain that the firmware program is
compatible with the hardware and software of the device.
Never turn off power during flash upgrade.
In case of flash upgrade error, the program is lost irreversibly (there
is not a bootloader) and the device must be sent back to Datalogic
Automation for restoring.
AMT58x-PN ProfiNET®
123
Advertisement
Table of Contents
