4.
in the page that appears you have to enter the desired preset
value expressed in hexadecimal format; please enter the
value without the 0x prefix. Press ENTER to confirm. In the
example, the value 0x1000 hex (= 4096 dec) has been
entered. The preset value is stored automatically on the non
volatile memory (you do not need to use the parameter P971
–Transfer to non volatile memory);
Figure 95 - Changing the Preset value
5.
after completing the operation the following page will appear:
the preset value has been stored properly on the non volatile
memory.
Figure 96 - Preset value stored properly
AMT58x-PN ProfiNET®
127