Finding A Dante Device Ip Address; Dante Controller Operation; Dante Transmitters And Receivers; Axp 64 C At Transmitters And Receivers - Extron electronics AXP 64 C AT User Manual

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the AXP 64 C AT in Dante Controller
NOTE: If the AXP 64 C AT has not been renamed, its default name consists of the
Figure 24.
1.
2.
3.

Dante Controller Operation

Dante Transmitters and Receivers

A Dante network is comprised of transmitters that output digital audio onto the Dante
network and receivers that receive digital audio input from the Dante network.
•
•
AXP 64 C AT Transmitters and Receivers
In the AXP 64 C AT, the line output and EXP output channels are Dante transmitters
because their audio output is transmitted onto the Dante network. Routing an analog
output to the Dante network allows the signal to be output on both analog and Dante
simultaneously, the same is true for the EXP outputs.
The AXP 64 C AT input channels are Dante receivers because they receive digital audio
signal from the Dante network that can then be routed and mixed into the AXP 64 C AT mix
AXP 64 C AT.
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example, FOX3AT-1b6c78).
Device Info Page
Open Dante Controller.
On the Dante Controller-Network View screen, click the Device Info tab (see
figure 24, ).
1
On the Device Info page, locate the name of the AXP 64 C AT in the Device Name
). The IP address is located in the Primary Address column (
column (
2
figure 24, the IP address for the connected AXP 64 C AT is 192.168.254.254.
Transmitters output digital audio from the device onto the audio network.
Receivers take in digital audio from the audio network into the device.
on page 25).
AXP 64 C AT • Dante Configuration and Operation
Renaming
). In
3
29