Input Settings - IDK MSD-501 Command Reference Manual

MSD-501/502 Command Guide

3.3.6 Input settings

@GDT / @SDT No-signal-input monitoring
Function Getting
Format @GDT
Return value @GDT, time_1, time_2, time_3
Parameter time_1-3: No-signal-input monitoring
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits, these
values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900 ms.)
ch_1-3: Input channel
Example
@GDT
@GDT,6000,10000,10000
@SDT,3,6000
@SDT,3,6000
Remarks Those commands are only for digital input.
@GHE / @SHE HDCP input enabled/disabled
Function Getting
Format @GHE
Return value @GHE, hdcp_1, hdcp_2, hdcp_3
Parameter in_1-3: HDCP input enabled/disabled
ch_1-3: Input channel
Example @GHE
@GHE,1,1,0
@SHE,1,0
@SHE,1,0
Remarks Those commands are only for digital input.
36
0 = OFF, 2000 = 2 sec. to 15000 = 15 sec. [Default] 10000 = 10 sec.
0 = All digital inputs, 1 = IN1 to 3 = IN3
0 = DISABLE, 1 = ENABLE [Default]
0 = All digital inputs, 1 = IN1 to 3 = IN3
Setting
@SDT, ch_1, time_1 (, ch_2, time_2･･･)
@SDT, ch_1, time_1 (, ch_2, time_2･･･)
Getting the monitoring time of input video signals.
IN1: 6000 ms. (6 sec.), IN2 and IN3: 10000 ms.
(10 sec.)
Setting the monitoring time of IN3 to 6000 ms. (6
sec.).
Completed normally.
Setting
@SHE, ch_1, hdcp_1 (, ch_2,
hdcp_2･･･)
@SHE, ch_1, hdcp_1 (, ch_2,
hdcp_2･･･)
Getting HDCP input enabled/disabled.
Setting IN3 and other inputs of HDCP input to
DISABLE and ENALBE, respectively.
Setting IN1 HDCP input to DISABLE.
Completed normally.