Ink Replacement Method; When Ink Near End Is Displayed; When Ink End Is Displayed - MIMAKI JV330 Series Operation Manual

1.5 Ink Replacement Method

When Ink Near End is Displayed

Ink levels are low. We recommend replacing with new ink as soon as possible. Printing is still possible, but
cleaning and continuous printing are not possible. Note that ink may run out during printing.
To check which color ink needs to be replaced, press the [ENTER] key on the LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 35)

When Ink End is Displayed

The ink has run out. Replace with new ink.
Thoroughly read the following and make sure you understand its contents.
"Ink or any Other Liquid Used with the Machine"(P. 14)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
45
Chapter 1 Before Use
1