Print Head Nozzle Washing - MIMAKI UJV100-160 Operation Manual

• Never touch the print head nozzle surface.
Clean the print head sides (dark red area)
using a cleaning stick.
Clean using a cleaning stick or soft cloth.
6
Press the [ENTER] key once cleaning is complete.
7
Close the maintenance covers, then press the [ENTER] key.

Print Head Nozzle Washing

If print defects (e.g., nozzle clogging, deflection) remain unresolved even after head cleaning (
Cleaning"(P. 61)), apply nozzle washing to the print head.
1
In LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Nozzle Wash], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Clean the wiper and bracket.
"Wiper Cleaning"(P. 88)
5
Press the [ENTER] key once cleaning is complete.
• "Cap Cleaning Completed (Next)[ENT]" appears on the display.
6
Clean the cap rubber.
"Cap Cleaning"(P. 89)
7
Press the [ENTER] key once cleaning is complete.
• "Fill the Liquid. Exit Next [ENT]" appears on the display.
Never touch the nozzle
surface!
93
Chapter 4 Maintenance
"Head
4