Table of Contents
Advertisement
For information about how to access Network Voyager and the related reference materials,
see
The IPSO command-line interface (CLI)—an SSHv2-secured interface that enables you
to easily configure Nokia IP security platforms from the command line. Everything that you
can accomplish with Network Voyager—manage, monitor, and configure the IP560 security
platform—you can also do with the CLI.
For information about how to access the CLI, see the Nokia CLI Reference Guide for IPSO
v3.6 or later.
Nokia Horizon Manager—a secure GUI-based software image management application.
With Horizon Manager, you can securely install and upgrade the Nokia proprietary IPSO
operating system, plus hardware and third-party applications such as Check Point VPN-1.
Horizon Manager can perform installations and upgrades on up to 2,500 Nokia IP security
platforms, offering administrators the most rapid and dependable method to perform Check
Point application upgrades.
For information about how to obtain Horizon Manager, contact your Nokia solution provider
or see the
Nokia IP560 Security Platform Overview
Figure 1
Figure 1 Component Locations Front View
Four-Port 10/100/1000 Ethernet NIC
The four-port 10/100/1000 Mbps Ethernet ports are located in slot 4.
of the Ethernet ports and link LEDs. The top link LED represents the left-most port (port 1). The
remaining LEDs represent the remaining ports from top to bottom and left to right.
IP560 Security Platform Installation Guide
"Using Nokia Network Voyager"
"Nokia Contact Information"
shows the component locations for the IP560.
PMC NIC and ADP module slots
(slots 1 and 2)—unpopulated in
base bundle
SLOT 1
Nokia IP560 Security Platform Overview
on page 42.
on page 3.
System status LEDs
PC-card slot (slot 3)
SLOT 2
Console port
AUX port
Reset button
IP560
SLOT 3
SLOT 4
1
2
3
4
00350
Four-port Ethernet
10/100/1000 (slot 4)
Figure 2
shows the layout
21
Advertisement
Table of Contents
Troubleshooting
