Viewing Signal Lists - ABB OmniCore Operating Manual

8 Handling inputs and outputs, I/O

8.2 Viewing signal lists

8.2 Viewing signal lists
Overview
The Signals page is used to view the input and output signals and their values.
Procedure
Use the following procedure to view a list of I/O signals:
236
1 On the start screen, tap I/O, and then select Signals from the menu.
2 The Signals page is displayed.
Note
By default all the signals are displayed.
3 Tap on the Filter list.
xx1800001856
4 Select the category of the signal that you want to view.
The signals of the selected category are displayed.
Tip
You can use the search box to quickly filter and view a particular signal.
© Copyright 2019-2021 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: J