Toyota Land Cruiser 1988 Repair Manual page 80

J
'\'
\
\\
'
' '
ENGINE MECHANICAL- Cylinder Block EM-49
EM4363
EM4375
EM4396 EM4395
21. DISCONNECT TRANSMISSION CONTROL ROD
Remove the two nuts and disconnect the control rod.
22. DISCONNECT EXHAUST PIPE FROM EXHAUST
MANIFOLD
(a) Remove the exhaust pipe front bracket.
(b) Remove the four nuts, and disconnect the exhaust
pipe.
23. PLACE JACK UNDER TRANSMISSION
Be sure to put a wooden block between the jack and the
transmission pan to prevent damage.
24. REMOVE FRAME CROSSMEMBER
Remove the eight bolts and two nuts, and then remove
the frame crossmember.
25. REMOVE ENGINE WITH TRANSMISSION
(a) Attach the engine hoist chain to the two engine
hangers.
(b) Remove the mount nuts and washers.
(c) Lift the engine with transmission out of the vehicle
slowly and carefully.
NOTE: Make sure the engine is clear of all wiring and
hoses.
(d) Place the engine and transmission assembly onto
the stand.
26. REMOVE A/TOIL COOLER PIPES
27. REMOVE TRANSMISSION FROM ENGINE