Toyota Land Cruiser 1988 Repair Manual page 331

AC-10 AIR CONDITIONING SYSTEM- Compressor
7. INSTALL KEY IN SHAFT GROOVE
Using SST and plastic hammer, tap the key lightly.
SST 07114-4501 0
SST
Place the felt inside the bore.
AC0705
AC0706
AC0036
AC0523
8. POUR COMPRESSOR OIL INTO COMPRESSOR
Add the same quantity plus 20cc of oil into the compres-
sor.
Compressor oil: DENSOOIL6
SUNISO NO. 5GS
9.
INSTALL SERVICE VALVE
(a) Lubricate new 0-ring with compressor oil. Install
the 0-rings in the service valve.
(b) Install the service valve on the compressor. Using
SST and torque wrench, tighten the bolts.
SST 0711 0-61 050
Torque: 260 kg-em (19 ft-lb, 25 N·m)
10. CHECK SHAFT STARTING TORQUE
Torque: 30 kg-em (26 in.-lb, 2.9 N·m) or less
ASSEMBLY OF MAGNETIC CLUTCH
1. INSTALL TWO BEARINGS IN ROTOR
(a) Using SST, press a shield ring and two new bear-
ings into the rotor boss until fully seated.
SST 0711 0-77011
(b) Install the bearing snap ring into the rotor groove.