Toyota Land Cruiser 1988 Repair Manual page 293

FA-6
FRONT AXLE AND SUSPENSION -Front Axle Hub
FA0072
FA0073
FA0074 02958
Front Axle Hub
DISASSEMBLY OF FRONT AXLE HUB
1. REMOVE DISC BRAKE CYLINDER
(a) Using SST, disconnect the brake tube.
SST 09751-36011
(b) Remove the brake caliper.
2. REMOVE FLANGE OR FREE WHEEL HUB
NOTE: For the free wheel hub. (See page FA-7 repair
manual chassis and body LAND CRUISER Heavy-Duty
Pub. No. 36262E)
(a) Remove the cap from the flange.
(b) Using snap ring pliers, remove the snap ring.
(c) Remove the mounting nuts.
(d) Using a brass bar and hammer, tap the bolt heads
and remove the cone washers.
(e) Install and tighten the two bolts, and remove the
flange.
3. REMOVE AXLE HUB WITH DISC
(a) Using a screwdriver, release the lock washer.
(b) Using SST, remove the lock nut.
SST 09607-60020
(c) Remove the lock washer and adjusting nut.
(d) Remove the axle hub with the disc.