Toyota Land Cruiser 1988 Repair Manual page 296

FRONT AXLE AND SUSPENSION - Front Axle Hub FA-9
7. INSTALL FLANGE OR FREE WHEEL HUB
NOTE: In the case of the free wheel hub. (See page
FA-9 repair manual chassis and body LAND CRUISER
Heavy-Duty pub. No. 36262E)
(a) Place the gasket in position on the axle hub.
(b) Install the flange to the axle hub.
(c) Install six cone washers and nuts.
Torque the nuts.
~....-
_ _ _ _ _ _ _ _ _ _
__;_;_FA.;;.;.oos;;;;;.~J
Torque: 315 kg-em (23 ft-lb, 31 N·m)
FAQ084
(d) Install a bolt in the axle shaft and pull it out.
(e) Using snap ring pliers, install the snap ring.
(f) Remove the bolt.
(g) Install the cap to the flange.
8. INSTALL BRAKE CALIPER
(a) Install the brake caliper to the steering knuckle.
Torq·ue the mounting bolts.
Torque: 900 kg-em (65 ft-lb, 88 N·m)
{b) Using SST, connect the brake tube.
Torque: 155 kg-em (11 ft-lb, 15 N·m)
9. BLEED BRAKE LINE
(See page BR-6 repair manual chassis and body
LAND CRUISER Heavy-Duty Pub. No. 36262E)