Toyota Land Cruiser 1988 Repair Manual page 44

ENGINE MECHANICAL- Cylinder Head EM-13
EM4375
9. DISCONNECT HIGH-TENSION CORDS FROM
SPARK PLUGS AND IGNITION COIL
10. REMOVE HEATER WATER (OIL COOLER) PIPE
{a) Disconnect the hoses from the water outlet, water
pump, oil cooler and heater water pipe.
(b) Remove the bolts and heater water (oil cooler) pipe
from the cylinder head.
11. DISCONNECT RADIATOR UPPER HOSE
12. DISCONNECT FUEL HOSES
13. RAISE VEHICLE
CAUTION: Be sure the vehicle is securely sup-
ported.
14. DISCONNECT EXHAUST PIPE FROM EXHAUST
MANIFOLD
(a) Loosen the bolt and disconnect the clamp from the
bracket.
(b) Remove the four nuts, and disconnect the exhaust
pipe.
15. REMOVE AIR PUMP
(a) Disconnect the air hose.
(b) Remove the bolt, nut and air pump stay.
(c) Remove the through bolt, nut and air pump.
16. REMOVE DELIVERY PIPE AND INJECTORS
(See steps 4 to 9 on pages Fl-58, 59)
17. REMOVE AIR INJECTION MANIFOLD
Remove the two bolts, four union nuts and air injection
manifold.
18. REMOVE INTAKE AND EXHAUST MANIFOLDS
(a) Remove the two bolts and manifold stay.
(b) Remove the six bolts and three manifold heat insu-
lators.