Toyota Land Cruiser 1988 Repair Manual page 265

ST-8 STARTING SYSTEM- Starter
SST
Continuity
ST0137
Switch Body
Continuity
ST0138
2. IF NECESSARY. REPLACE BEARINGS
(a) Using SST, remove the bearing.
SST 09286-46011
(b) Using SST and a press, press in a new front bearing.
SST 09285-7601 0
(c) Using a press, press in a new rear bearing.
Magnetic Switch
1.
PERFORM PULL-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, check that there is continuity be-
tween terminals 50 and C.
2.
If there is no continuity, replace the magnetic switch
assembly.
PERFORM HOLD-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, check that there is continuity be-
tween terminal 50 and the switch body.
If there is no continuity, replace the magnetic switch
assembly.