Toyota Land Cruiser 1988 Repair Manual page 106

ENGINE MECHANICAL- Cylinder Block EM-75
EM4397 EM4398
EM4375
EM4363
INSTALLATION OF ENGINE
1. INSTALL TRANSMISSION TO ENGINE
2. INSTALL A/TOIL COOLER PIPES
3. INSTALL ENGINE WITH TRANSMISSION IN
VEHICLE
(a) Attach the engine hoist chain to the engine hangers.
(b) Lower the engine into the engine compartment.
(c) Align the engine with the transmission and engine
mounting supports.
(d) Install the washers and mount nuts.
(e) Remove the hoist chain.
4. RAISE VEHICLE
CAUTION: Be sure the vehicle is securely sup-
ported.
5. INSTALL FRAME CROSSMEMBER
Install the frame crossmember with the eight bolts and
two nuts.
Torque: Bolt 400 kg-em (29ft-lb. 39 N·m)
Nut 600 kg-em (43 ft-lb, 59 N·m)
6. CONNECT EXHAUST PIPE TO EXHAUST
MANIFOLD
(a) Place two new gaskets on the exhaust pipe.
(b) Connect the exhaust pipe with four new nuts.
Torque: 630 kg-em (46 ft-lb, 62 N·m)
7. CONNECT TRANSMISSION CONTROL ROD
Connect the control rod with the two nuts.