Toyota Land Cruiser 1988 Repair Manual page 73

EM-42
ENGINE MECHANICAL- Timing Gears and Camshaft
_____,:>\
EM4505
Em4391
Adhesive
~A
(14
mm
Bolt Head)
~
B (1 0 mm Bolt Head)
~
C (1 0 mm Bolt Head)
EM1358
(d) Install the two bolts mounting the thrust washer to
the cylinder block. Torque the bolts.
Torque: 120 kg-em (9 ft-lb, 12 N·m)
3. CHECK TIMING GEAR BACKLASH
Using a dial indicator, measure the backlash at several
places while turning the camshaft clockwise and coun-
terclockwise.
Standard backlash: 0.100- 0.183 mm
(0.0039- 0.0072 in.)
Maximum backlash: 0.25 mm (0.0098 in.)
4. INSTALL OIL NOZZLE
(a) Install and set the oil nozzle in position.
(b) Using a chisel and hammer, stake the threads of the
oil nozzle.
5. INSTALL TIMING GEAR COVER AND
CRANKSHAFT PULLEY
NOTE: There are three size timing gear cover bolts indi-
cated
A,
8 and C.
(a) Apply adhesive to the threads of the two A bolts.
Adhesive: Part No. 08833-00080, THREE BOND
1344, LOCTITE 242 or equivalent.
(b) Install a new gasket and the gear cover with the
twelve bolts. Finger tighten all bolts.