Toyota Land Cruiser 1988 Repair Manual page 24

Add if cool
MAINTENANCE- Maintenance Operations MA-9
MA0099
MA0462
MA0099
18. CHECK OIL LEVEL IN AUTOMATIC
TRANSMISSION, TRANSFER AND
DIFFERENTIAL OIL
19.
(a) (Automatic transmission)
Check the automatic transmission for leakage.
If leakage is found, check for cause and repair.
Transmission fluid: ATF DEXRON® II
(b) (Transfer)
Remove the filler plug and feel inside the hole with
your finger. Check that the oil comes to within 5 mm
(0.20 in.) of the bottom edge of the hole.
If the level is low, add oil until it begins to run out the
filler hole.
Transfer oil:
Oil grade API GL·4 or GL-5
Viscosity SAE 90
(c) (Differential)
Remove the filler plug and feel inside the hole with
your finger. Check that the oil comes to within
5
mm
(0.20 in.) of the bottom edge of the hole.
If the level is low, add oil until it begins to run out the
filler hole.
Differential oil:
Oil grade API GL-5 hypoid gear oil
Viscosity Above -18°C (O"F) SAE 90
Below -1s•c (O.F} SAE SOW-90
or SOW
REP.LACE AUTOMATIC TRANSMISSION FLUID
(a) Remove the drain plug and drain the fluid.
(b) Reinstall the drain plug securely.
(c) With the engine "OFF", and new fluid through the
dipstick tube.
Fluid: ATF DEXRON® II
Drain and refill capacity (Reference):
5.0 liters (5.3 US qts, 4.4 Imp. qts)
(d) Start the engine and shift the selector into all posi-
tions from "P" through "L", and then shift into "P".
(e) With the engine idling, check the fluid level.
Add fluid up to the "COOL" level on the dipstick.
CAUTION: Do not overfill.