Toyota Land Cruiser 1988 Repair Manual page 261

ST-4
(2)
~
(4)
STARTING SYSTEM -Starter
ST0232 ST0233
DISASSEMBLY OF STARTER
(See page ST-3)
1. REMOVE FIELD FRAME WITH ARMATURE
FROM MAGNETIC SWITCH ASSEMBLY
2.
(a) Remove the nut, and disconnect the lead wire from
the magnetic switch terminal.
(b) Remove the two through bolts.
(c) Pull out the field frame with the armature from the
magnetic switch assembly.
REMOVE STARTER HOUSING, CLUTCH
ASSEMBLY AND IDLE GEAR
(a) Remove the two screws.
{b) Remove the following parts from the
switch assembly:
(1) Starter housing
(2)
Idle gear and bearing
(3) Clutch assembly
(4) Return spring
magnetic
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the
Magretic Finger
clutch shaft hole.
4. REMOVE BRUSH HOLDER
(a) Remove the two screws and end cover from the field
frame.