Toyota Land Cruiser 1988 Repair Manual page 26

MAINTENANCE- Maintenance Operations
FAOOB1
MA0456
(d) Install a new lock washer and the lock nut.
(e) Using SST, torque the lock nut.
SST 09607-60020
Torque: 600 kg-em (43 ft-lb, 59 N·m)
(f) Using a spring tension gauge, recheck the preload.
Preload (starting): 2.8- 5.7 kg
(6.2 -12.6 lb, 27-56 N)
If not within specification, adjust with the adjusting nut.
(g) Secure the lock nut by bending one of the lock
washer teeth outward and the other lock washer
teeth inward.
22. LUBE STEERING KNUCKLE CHASSIS AND
PROPELLER SHAFT
(a) Remove the screw plug from each steering knuckle
and repack with lubricant.
Steering knuckle grease:
Molybdenum disulphide lithium base chassis
grease (NLGI No.2)
(b) Reinstall the two screw plugs.
(c) Lubricate chassis components, referring to the lubri-
cation chart. Before pumping in grease, wipe off any
mud and dust on the grease fitting.
Grease grade
Relay rod ends
Molybdenum disulphide lithium base
chassis grease (NLGI No.2)
Propeller shaft
Lithium base chassis grease (NLGI No.2)