Toyota Land Cruiser 1988 Repair Manual page 267

ST-10
(2)
)
~
(1)
STARTING SYSTEM- Starter
ST0245
ST0233 ST0232
(c) Place the following parts in position on the starter
housing:
(1) Clutch assembly
(2) Idler gear and bearing
(d) Assemble the starter housing and magnetic switch
assembly and install the two screws.
5. INSTALL FIELD FRAME WITH ARMATURE TO
MAGNETIC SWITCH ASSEMBLY
(a) Align the protrusion of the field frame with the
cutout of the magnetic switch assembly.
(b) Install the two through bolts.
(c) Connect the lead wire to the magnetic switch termi-
nal C, and install the nut.