Toyota Land Cruiser 1988 Repair Manual page 325

AC-4
AIR CONDITIONING SYSTEM- Compressor
~\
2. REMOVE ROTOR
(a) Using SST, remove the snap ring.
SST
07114-84020
AC0057
AC0058
AC0695
AC0696
.
,
AC0011 AC0542
(b) Using a plastic hammer, tap the rotor off the shaft.
CAUTION: Be careful not to damage the pulley
when tapping on the rotor.
3. REMOVE STATOR
(a) Disconnect the stator lead wires from the compres-
sor housing.
(b) Using SST, remove the snap ring. Remove the sta-
tor.
SST 07114-84020
4. REMOVE ROTOR BEARINGS
NOTE: Press out the bearings only if they are to be
replaced.
(a) Remove the bearing snap ring from the rotor
(b) Using SST, press out the two bearings .
SST 0711 0-77011
5. INSPECT PRESSURE PLATE AND ROTOR
(a) Inspect the pressure plate and rotor surfaces for
wear and scoring. Replace if necessary.
(b) Check the rotor bearings for wear and leakage of
grease. Replace if necessary.