Summary of Contents for Toyota Land Cruiser Station Wagon
Page 2
Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats, power windows)
TABLE OF CONTENTS For your information ......Gauges and meters (with 7-inch display) ......133 Reading this manual...... How to search ....... Multi-information display (4.2- Pictorial index ........ inch display)......137 Multi-information display (7-inch For safety and security display) ......146 Head-up display....157 1-1.
Page 4
Parking Support Brake function AHB (Automatic High Beam) (rear pedestrians) .....399 ..........284 Rear view monitor system ..401 Fog light switch ....287 Toyota parking assist monitor Windshield wipers and washer ..........408 ..........288 Multi-terrain Monitor....421 Rear window wiper and washer Driving mode select switch .473 ..........292...
Page 5
TABLE OF CONTENTS Crawl Control (with Turn Assist Using the steering wheel function)......481 switches......538 Multi-terrain Select....486 ® Register a Bluetooth device ..........538 Downhill assist control system ..........489 5-7. “SETUP” menu DPF (Diesel Particulate Filter) Using the “SETUP” menu system ......491 (“Bluetooth”...
Page 6
When trouble arises ..........598 6-4. Using the other interior fea- 8-1. Essential information tures Emergency flashers ....690 Toyota multi-operation touch (vehicle with the 12.3-inch dis- If your vehicle has to be stopped play)........602 in an emergency ....690 Other interior features..605...
Page 7
TABLE OF CONTENTS If the vehicle becomes stuck ..........739 Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)........742 Fuel information ....759 9-2. Customization Customizable features ..761 9-3. Initialization Items to initialize ....777 Index What to do if... (Troubleshooting) ..........780 Alphabetical Index .....783...
Toyota to have or use the key. Children may be able to start the vehi- Both genuine Toyota and a wide cle or shift the vehicle into neutral. There is also a danger that children variety of other spare parts and...
Page 10
Installation of an RF-trans- • Images from the cameras mitter system Your vehicle is equipped with cameras. Contact your Toyota dealer for the loca- The installation of an RF-transmit- tion of recording cameras. ter system in your vehicle could The recorded data varies according...
Page 11
These data can help provide a bet- ment agency ter understanding of the circum- • For use by Toyota in a lawsuit stances in which crashes and • For research purposes where the injuries occur.
Page 12
• For use by Toyota in a lawsuit However, if necessary, Toyota may: • Use the data for research on vehicle safety performance • Disclose the data to a third party for research purposes without disclos- ing information about the specific...
Reading this manual Symbols Meanings Indicates the action (push- Explains symbols used in this ing, turning, etc.) used to operate switches and manual other devices. Indicates the outcome of Symbols in this manual an operation (e.g. a lid opens). Symbols Meanings WARNING: Explains something that, if...
How to search Searching by title Table of contents: P.2 Searching by name Alphabetical index: P.783 Searching by installation posi- tion Pictorial index: P.14 Searching by symptom or sound What to do if... (Troubleshoot- ing): P.780...
Pictorial index Pictorial index Exterior Side doors ..................P.169 Locking/unlocking ................P.169 Opening/closing the side windows..........P.214 Locking/unlocking by using the mechanical key ......P.727 Warning messages ................. P.709 Back door ..................P.173 Locking/unlocking ................P.175 Opening/closing the back door ..........P.175, 176 Power back door ................
Page 16
Pictorial index Windshield wipers ................ P.288 Rear window wiper ............... P.292 Precautions against winter season ..........P.504 To prevent freezing (windshield wiper de-icer ) ...... P.563, 575 Precautions against car wash (rain-sensing windshield wipers) ..P.621 Fuel filler door (include AdBlue™ tank cap ) ......
Page 17
Pictorial index rear fog lights ............... P.268, 275, 287 Back-up lights Shifting the shift lever to R ............P.261, 264 License plate lights............... P.275 : If equipped...
Page 18
Pictorial index Instrument panel (Left-hand drive vehicles) Engine switch................P.256 Starting the engine/changing the modes ........ P.256, 259 Emergency stop of the engine ............P.690 When the engine will not start............P.725 Warning messages ................. P.709 Shift lever................P.261, 264 Changing the shift position............
Page 19
Pictorial index Display ..................P.137, 146 When the warning messages are displayed ........P.709 Turn signal lever ................P.268 Headlight switch ................P.275 Headlights/front position lights/tail lights/ daytime running lights ..............P.275 Front fog lights /rear fog lights ............ P.287 Windshield wiper and washer switch .........
Page 20
Pictorial index Switches (Left-hand drive vehicles) Outside rear view mirror switches ..........P.211 Driving position memory buttons ..........P.220 Window lock switch..............P.216 Power window switches............... P.214 Door lock switch ................P.171 Manual headlight leveling dial ............ P.277 Adaptive High-beam System switch ..........
Page 21
Pictorial index VIEW switch ................. P.424 “ODO TRIP” switch............... P.131, 135 Front differential lock switch ............P.478 Rear differential lock switch ............P.480 Power heater switch ............P.564, 576 DPF system switch ..............P.491 Heater idle up switch ............P.564, 576 Front seat heater switches ............
Page 22
Pictorial index Meter control switches ............P.137, 147 Telephone switch Vehicle-to-vehicle distance switch ........P.340, 353 LTA (Lane Tracing Assist) switch ..........P.314 LDA (Lane Departure Alert with Yaw Assist Function) switch ..................P.324 Cruise control switches Dynamic radar cruise control with full-speed range .....
Page 24
Pictorial index Interior (Left-hand drive vehicles) SRS airbags..................P.43 Floor mats..................P.36 Front seats..................P.195 Rear seats ................... P.196 Head restraints ................P.205 Seat belts ..................P.38 Console box ................P.594 Cool box ..................P.605 Inside lock buttons ............... P.172 Cup holders ...................
Page 25
Pictorial index *1, 2 Rear seat entertainment system Assist grips ................... P.617 : If equipped : For vehicles with a navigation system or a multimedia system, refer to the “Navi- gation and Multimedia System Owner’s Manual”.
Page 27
Pictorial index ■Instrument panel (Right-hand drive vehicles) Engine switch................P.256 Starting the engine/changing the modes ........ P.256, 259 Emergency stop of the engine ............P.690 When the engine will not start............P.725 Warning messages ................. P.709 Shift lever................P.261, 264 Changing the shift position............
Page 28
Pictorial index Display ..................P.137, 146 When the warning messages are displayed ........P.709 Turn signal lever ................P.268 Headlight switch ................P.275 Headlights/front position lights/tail lights/daytime running lights ..P.275 Front fog lights /rear fog lights ............ P.287 Windshield wiper and washer switch ......... P.288 Rear window wiper and washer switch ........
Page 29
Pictorial index Switches (Right-hand drive vehicles) Outside rear view mirror switches ..........P.211 Driving position memory buttons ..........P.220 Window lock switch..............P.216 Power window switches............... P.214 Door lock switch ................P.171 Manual headlight leveling dial ............ P.277 Adaptive High-beam System switch ..........
Page 30
Pictorial index VIEW switch ................. P.424 “ODO TRIP” switch............... P.131, 135 Front differential lock switch ............P.478 Rear differential lock switch ............P.480 DPF system switch ..............P.491 Heater idle up switch ............P.564, 576 Front seat heater switches ............P.584 Front seat ventilator switches ............
Page 31
Pictorial index Meter control switches ............P.137, 147 Telephone switch Vehicle-to-vehicle distance switch ........P.340, 353 LTA (Lane Tracing Assist) switch ..........P.314 LDA (Lane Departure Alert with Yaw Assist Function) switch ..................P.324 Cruise control switches Dynamic radar cruise control with full-speed range .....
Page 33
Pictorial index Interior (Right-hand drive vehicles) SRS airbags..................P.43 Floor mats..................P.36 Front seats..................P.195 Rear seats ................... P.196 Head restraints ................P.205 Seat belts ..................P.38 Console box ................P.594 Cool box ..................P.605 Inside lock buttons ............... P.172 Cup holders ...................
Page 34
Pictorial index *1, 2 Rear seat entertainment system Assist grips ................... P.617 : If equipped : For vehicles with a navigation system or a multimedia system, refer to the “Navi- gation and Multimedia System Owner’s Manual”.
Page 36
For safety and security 1-1. For safe use Before driving ..... For safe driving ....Seat belts......SRS airbags ....... Exhaust gas precautions ..1-2. Child safety Riding with children .... Child restraint systems (except for India) ......Child restraint systems (for India) ........
Insert the retaining hooks (clips) Toyota Genuine floor mats. into the floor mat eyelets. Only use floor mats designed for the driver’s seat. Always install the floor mat securely using the retaining hooks (clips) provided.
1-1. For safe use For safe driving WARNING Observe the following precautions. Failure to do so may result in death or For safe driving, adjust the serious injury. seat and mirror to an appropri- Do not adjust the position of the ate position before driving.
Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 40
Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling may lead to incorrect operation. Correct use of the seat belts...
Page 41
(P.38) Seat belt regulations If seat belt regulations exist in the coun- try where you reside, please contact your Toyota dealer for seat belt replace- ment or installation. Push the seat belt shoulder Fastening and releasing the...
Page 42
1-1. For safe use sion or a vehicle rollover. Seat belt pretensioners The pretensioners do not activate in the Front seats event of a minor frontal impact, a side impact or a rear impact. : For vehicles with model code that has “V”...
Page 43
PCS-linked seat belt pretensioner control (vehicles with Toyota Safety Sense) If the PCS (pre-collision system) deter- Front and second outboard mines that the possibility of a collision...
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ...
Page 45
1-1. For safe use Can help protect the torso of occupants in the second outer seats SRS curtain shield airbags (if equipped) Can help protect primarily the head of occupants in the outer seats SRS airbag system components Knee airbags Front passenger airbag Curtain shield airbags (if equipped) Side impact sensors (front door) (if equipped)
Page 46
1-1. For safe use Safing sensor (rear) (if equipped) Front impact sensors Airbag sensor assembly The main SRS airbag system components are shown above. The SRS air- bag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non- toxic gas to help restrain the motion of the occupants.
Page 47
1-1. For safe use : In some cases, the call cannot be and curtain shield airbags (if equipped) may also deploy if a serious impact made. (P.107) occurs to the underside of your vehicle. SRS airbag deployment conditions Some examples are shown in the illus- (SRS front airbags) tration.
Page 48
When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Contact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. The front of the vehicle is damaged or...
Page 49
1-1. For safe use The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the air- bag. Since the risk zone for the driver’s air- bag is the first 50 - 75 mm (2 - 3 in.) of inflation, placing yourself 250 mm (10 in.) from your driver airbag provides Vehicles with SRS side airbags: The...
Page 50
An infant or child who is too small to use a seat belt should be properly secured using a child restraint system. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained.
Page 51
Vehicles with SRS curtain shield your Toyota dealer. airbags: Do not hang coat hangers Vehicles with SRS curtain shield or other hard objects on the coat airbags: If the areas where the SRS hooks.
Page 52
CD players airbag system components Do not dispose of your vehicle or per- form any of the following modifica- tions without consulting your Toyota dealer. The SRS airbags may mal- function or deploy (inflate) acciden- tally, causing death or serious injury.
1-2. Child safety Riding with children 1-2.Child safety WARNING When children are in the vehicle Observe the following precau- Never leave children unattended in the vehicle, and never allow children tions when children are in the to have or use the key. vehicle.
The use of a Toyota genuine seat belt. child restraint system is rec- Choose a child restraint system ommended, as it is safer to appropriate to the age and size use in this vehicle.
Page 56
Do not store the vided in this manual. child restraint system unsecured in the passenger compartment. Toyota strongly urges the use of a proper child restraint system that If it is necessary to detach the child conforms to the weight and size of restraint system, remove it from the the child, installed on the rear seat.
Page 57
1-2. Child safety height can be adjusted, move it There is a label(s) on the passen- to the upper most position. ger side sun visor, indicating it is forbidden to attach a rear-facing If the head restraint interferes child restraint system to the front with the child restraint system passenger seat.
Page 58
1-2. Child safety WARNING Do not allow the child to lean WARNING his/her head or any part of his/her Only put a forward-facing child body against the door or the area of restraint system on the front seat the seat, front or rear pillars, or roof when unavoidable.
Page 59
1-2. Child safety Child restraint system com- WARNING patibility for each seating Use a child restraint system suit- able to the age and size of the child position (except for ASEAN and install it to the rear seat. countries, Latin American If the driver’s seat interferes with and the Caribbean coun- the child restraint system and pre-...
Page 60
1-2. Child safety attached to the child restraint • “semi-universal” system. • “restricted” • “vehicle specific” : UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child restraint systems. : The child restraint systems men- Example of the displayed regulation tioned in the table may not be avail- number able outside of the EU area.
Page 61
1-2. Child safety Left-hand drive vehicles for 7- passenger models *2, 3 *2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for i-Size and ISOFIX child restraint system. Right-hand drive vehicles for 7- Includes a top tether anchorage passenger models point.
Page 62
1-2. Child safety the upper most position. : Use only a front-facing child restraint system. Detail information for child restraint systems installation Seating position Seat position num- Seating position suitable for univer- Forward- sal belted facing (Yes/No) only i-Size seating position (Yes/No) Seating position suitable for lateral...
Page 63
1-2. Child safety Fixture Description Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat When securing some types of child guide, move the seat cushion forward.
Page 64
1-2. Child safety attached to the child restraint Child restraint system com- system. patibility for each seating position (for ASEAN coun- tries) Child restraint system compat- ibility for each seating posi- tion Compatibility of each seating posi- tion with child restraint systems (P.64) displays the type of child restraint systems that can be used and possible seating positions for...
Page 65
1-2. Child safety system or contact the retailer of Left-hand drive vehicles for 7- the child restraint system. passenger models • “universal” • “semi-universal” • “restricted” • “vehicle specific” Right-hand drive vehicles for 7- passenger models : UN(ECE) R44 and UN(ECE) R129 are U.N.
Page 66
1-2. Child safety : Adjust the seatback angle to the most upright position. When install- *2, 3 ing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seat- *2, 3 back angle until good contact is achieved.
Page 67
1-2. Child safety Seating position Seat position number Suitable rearward fac- ing fixture R2X, R2X, (R1/R2X/R2/R3/No) R2, R3 R2, R3 Suitable forward fac- F2X, F2, F2X, F2, ing fixture (F2X/F2/F3/No) Suitable junior seat B2, B3 B2, B3 fixture (B2/B3/No) ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture”...
Page 68
1-2. Child safety Recommended child restraint systems and Compatibility table Recom- Seating position mended Child Restraint System i-Size i-Size child MIDI Restraint (Yes/No) systems The child restraint systems mentioned in the table may not be available out- side the ASEAN countries. When securing some types of child ahead of the child seat belt restraint systems in rear seat, it...
Page 69
1-2. Child safety Check for an approval mark Child restraint system com- attached to the child restraint patibility for each seating system. position (for Latin American and the Caribbean coun- tries) Child restraint system compat- ibility for each seating posi- tion Compatibility of each seating posi- tion with child restraint systems...
Page 70
1-2. Child safety system or contact the retailer of Left-hand drive vehicles for 7- the child restraint system. passenger models • “universal” • “semi-universal” • “restricted” • “vehicle specific” Right-hand drive vehicles for 7- passenger models : UN(ECE) R44 and UN(ECE) R129 are U.N.
Page 71
1-2. Child safety : Adjust the seatback angle to the most upright position. When install- *2, 3 ing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seat- *2, 3 back angle until good contact is achieved.
Page 72
1-2. Child safety Seating position Seat position number Suitable rearward fac- ing fixture R2X, R2X, (R1/R2X/R2/R3/No) R2, R3 R2, R3 Suitable forward fac- F2X, F2, F2X, F2, ing fixture (F2X/F2/F3/No) Suitable junior seat B2, B3 B2, B3 fixture (B2/B3/No) ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture”...
Page 73
1-2. Child safety Recommended child restraint systems and Compatibility table Recom- Seating position mended Child Restraint System i-Size i-Size child MIDI Restraint (Yes/No) systems : However, this CRS name is become MIDI PLUS in only Brazil. The child restraint systems mentioned in the table may not be available out- side the Latin America and the Caribbean countries.
Page 74
1-2. Child safety attached to the child restraint Child restraint system com- system. patibility for each seating position (for EU countries) Child restraint system compat- ibility for each seating posi- tion Compatibility of each seating posi- tion with child restraint systems (P.74) displays the type of child restraint systems that can be used and possible seating positions for...
Page 75
1-2. Child safety system or contact the retailer of 7-passenger models the child restraint system. • “universal” • “semi-universal” • “restricted” • “vehicle specific” Suitable for “universal” category child restraint system fixed with : UN(ECE) R44 and UN(ECE) R129 the seat belt.
Page 76
1-2. Child safety support base, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rear- ward until there is no interfer- ence. If the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat cushion : If the head restraint interferes with forward.
Page 77
B2, B3 (B2/B3/No) : All universal categories (group 0, 0+, I, II and III). Toyota suggests the users to use seating positions. ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above.
Page 78
1-2. Child safety Mass ISO Fix- Child weight Class Description groups ture Rearward-facing infant seat Left lateral-facing infant seat (Car- up to 10 kg (22 rycot) lb.) Right lateral-facing infant seat (Carrycot) Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing up to 13 kg (28 child restraint systems lb.) Reduced-size, rearward-facing...
Page 79
Rearward-fac- ing seat Group 0 or 0+ TOYOTA Not Applicable Up to 10 kg or G0+, BABY SAFE PLUS 13 kg (Up to 22 lb. or 28 lb) Forward-facing seat...
Page 80
1-2. Child safety Child restraint system installation method Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.79 ISOFIX lower anchorage P.81 attachment Top tether anchorage P.83 attachment accordance to the operation man-...
Page 81
1-2. Child safety is not in the table), refer to the dance to the directions enclosed with the child restraint system. “Vehicle List” provided by the child restraint system maker for various possible installation positions, or check the compatibility after asking the retailer of the child restraint sys- tem.
Page 82
If your child restraint system does not provide a locking clip, you can purchase the following item Child restraint system fixed from your Toyota dealer: Locking clip for child restraint system with an ISOFIX lower (Part No. 73119-22010)
Page 83
1-2. Child safety gory (or the necessary information Check the positions of the exclu- is not in the table), refer to the sive fixing bars, and install the “Vehicle List” provided by the child child restraint system to the restraint system maker for various seat.
Page 84
1-2. Child safety WARNING Follow all installation instructions provided by the child restraint sys- tem manufacturer. When using an “i-Size MIDI ” (for ASEAN countries and Latin Amer- ica and the Caribbean countries) : However, this CRS name is become Top strap MIDI PLUS in only Brazil.
Page 85
1-2. Child safety tem with the head restraint being NOTICE raised, be sure to have the top strap pass underneath the head restraint. Anchor brackets (for top strap) When not in use, make certain to close the lid. If it remains open, the lid may be damaged.
P.88 size of the child. Child restraint system installation Toyota strongly urges the use of a method proper child restraint system that conforms to the size of the child, • Fixed with a seat belt: P.91 installed on the rear seat.
Page 87
1-2. Child safety conforms to ECE R44 or ECE WARNING *1, 2 R129 Handling the child restraint sys- If the child restraint system is not properly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving, or an accident.
Page 88
1-2. Child safety Mass group (ECE R44 only) This Mass group table is required when confirming the “Child restraint sys- tem suitability for various seating positions”. Confirm in accordance with the “Child restraint system suitability for various seating positions” (P.92, 96) The child restraint system which conforms to the standard of ECE R44 is categorized into 5 groups according to the weight of the child.
Page 89
1-2. Child safety Installation method Page Seat belt attach- P.91 ment ISOFIX rigid P.96 anchor attachment Anchor brackets (for top strap) P.100 attachment is unavoidable, adjust the seat as When using a child restraint follows and install the child restraint system system.
Page 90
1-2. Child safety back angle until good contact is restraint can be removed, achieved. remove the head restraint. Oth- Adjust the front of the seat cush- erwise, put the head restraint in ion to the uppermost position. the upper most position. ...
Page 91
1-2. Child safety WARNING There is a label(s) on the passen- ger side sun visor, indicating it is forbidden to attach a rear-facing child restraint system to the front passenger seat. Details of the label(s) are shown in the illustration below. WARNING...
Page 92
1-2. Child safety Use child restraint system suitable WARNING to the age and size of the child and Only put a forward-facing child install it to the rear seat. restraint system on the front seat If the driver’ seat interferes with the when unavoidable.
Page 93
1-2. Child safety customer. Confirm also in accor- (Ex. 1) When the weight is 12 kg, “Mass group 0+” dance with “Confirming the possible (Ex. 2) When the weight is 15 kg, “Mass installation seating positions and group I” the Mass Group for the seat belt Confirm and select the appropri- installation type child restraint sys- ate possible seating position for...
Page 94
1-2. Child safety Seating position Recommended Rear seat Mass groups Child Restraint Sys- Front Pas- tems senger seat Outboard Center Rearward- facing 9 to 18 kg “DUO PLUS” Forward- (20 to 39 lb.) facing *1,2 II, III *1,2 15 to 36 kg (34 to 79 lb.)
Page 95
1-2. Child safety ward until there is no interfer- Installing child restraint sys- ence. tem using a seat belt When installing a forward-facing Install the child restraint system in child seat, if there is a gap accordance to the operation man- between the child seat and the ual enclosed with the child restraint seatback, adjust the seatback...
Page 96
If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system If your child restraint system is (Part No. 73119-22010)
Page 97
1-2. Child safety restraint systems and possible WARNING seating position installation for the When a junior seat (booster seat) is child restraint system owned by the installed, always ensure that the customer. Confirm in accordance shoulder belt is positioned across the center of the child’s shoulder.
Page 98
1-2. Child safety “size class” and “mass group”, please refer to the child restraint system manual. If your child restraint system has no “size class” (or if you cannot find infor- mation in the table below), please refer to the child restraint system “vehicle list”...
Page 99
1-2. Child safety X: Not suitable seat position for ISOFIX child restraint systems in this mass group and/or size class. IUF: Suitable for ISOFIX forward-facing child restraint systems of “univer- sal” category approved for use in this mass group. IL: Suitable for ISOFIX child restraint systems of the categories for “specific vehicles”, “restricted”, or “semi-universal”...
Page 100
1-2. Child safety restraint can be removed, remove the head restraint. Otherwise, put the head restraint in the upper most position. When securing some types of child restraint systems in rear seat, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness.
Page 101
1-2. Child safety back. When using the lower anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system. Follow all installation instructions provided by the child restraint sys- tem manufacturer.
Page 102
1-2. Child safety installation and the head restraint can WARNING be removed, remove the head restraint. (P.205) When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. Firmly attach the top strap and make sure that the belt is not twisted.
1-3. Emergency assistance intended for communication with the 1-3.Emergency assistance *1, 2 eCall eCall system operator. : If equipped Emergency Notification Ser- : Operates within the eCall coverage. vices eCall is a telematics service that uses Global Navigation Automatic Emergency Calls Satellite System (GNSS) data If any airbag deploys, the system is and embedded cellular tech-...
Page 104
1-3. Emergency assistance depleted. If the red indicator light blinks for approximately 30 seconds during an Emergency Call, the call has been disconnected or the cellular network signal is weak. The service life of the backup battery does not exceed 3 years. If you accidentally press the “SOS”...
Page 105
Toyota dealer. When the Emergency Call sys- tem is replaced with a new one The Emergency Call system should NOTICE be registered. Contact your Toyota To prevent damage dealer. Do not pour any liquids onto the For your safety “SOS” button panel, etc. and do not Please drive safely.
Customs Union. : If equipped System components : Operates within regions offering emergency notification services. Ask your Toyota dealer for details. : The system name differs depending on the country. The Emergency Call system is a device installed on a vehicle...
Page 107
: In some cases, the call cannot be the performance of the Emergency made. (P.107) Call system. To test the device, contact your Toyota dealer. Indicator lights When the engine switch is turned to ON, the red indicator light will illumi-...
Page 108
The Emergency Call system should be registered. Contact your Toyota • Even when the vehicle is in the cel- dealer. lular phone service area, it may be...
Page 109
It may not be possible to make Emer- gency Calls, confirm the system sta- tus, or communicate with the ERA- GLONASS/EVAK control center oper- ator. If any of the above equipment is damaged, please consult your Toyota dealer.
1-4. Theft deterrent system Engine immobilizer sys- type engine immobilizer system. 1-4.Theft deterrent system Conditions that may cause the sys- tem to malfunction If the key is in contact with a metallic The vehicle’s keys have built- object in transponder chips that pre- If the key is in close proximity to or touching a key to the security system vent the engine from starting if...
1-4. Theft deterrent system outside door handle on the driver’s Double locking system side. Using the wireless remote control: : If equipped Press Unauthorized access to the vehicle is prevented by dis- WARNING abling the door unlocking Double locking system precau- function from both the interior tion and exterior of the vehicle.
1-4. Theft deterrent system Alarm Setting/canceling/stopping the alarm system : If equipped Items to check before locking The alarm uses light and the vehicle sound to give an alert when an To prevent unexpected triggering of intrusion is detected. the alarm and vehicle theft, make The alarm is triggered in the sure of the following: following situations when the...
Page 113
1-4. Theft deterrent system Start the engine. (The alarm will when the vehicle is locked. be deactivated or stopped after a Alarm-operated door lock few seconds.) In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the System maintenance vehicle: The vehicle has a maintenance-free...
Page 114
1-4. Theft deterrent system Canceling the intrusion sensor Intrusion sensor considerations The sensor may trigger the alarm in the and tilt sensor following situations: If you are leaving pets or other People or pets are in the vehicle. moving things inside the vehicle, make sure to disable the intrusion sensor and tilt sensor before setting the alarm, as they will respond to...
Page 115
Tilt sensor detection consider- ations Installing accessories other than The sensor may trigger the alarm in the genuine Toyota parts or leaving following situations: objects between the driver’s seat and front passenger’s seat may The vehicle is transported by a ferry, reduce the detection performance.
1-4. Theft deterrent system Fingerprint Authentica- Registering/deleting finger- tion System print information Fingerprint information can be reg- : If equipped istered or deleted on the multi-infor- The fingerprint authentication mation display. (P.141, 151) system performs fingerprint Registering fingerprint infor- authentication by authenticat- mation to the vehicle for the ing the finger used to touch the first time...
Page 117
1-4. Theft deterrent system handled, the system may be used. to perform fingerprint authenti- cation. The buzzer will sound (a short beep) when fingerprint authentication is suc- cessful. Select “Add” and then press Select the driver to register, and then press Using the finger to register fin- Select either “Finger1”...
Page 118
1-4. Theft deterrent system while slightly changing the posi- select from “Finger1” to “Fin- tion of the finger. ger4”), and then press Once fingerprint information has been This cannot be selected if fingerprint registered, a message is displayed on information has not been registered yet. the multi-information display.
Page 119
Please be sor multiple times with the finger that advised in advance that Toyota does will be used to start the engine. not accept any liability for loss or dam-...
Page 120
Do not remove, disassem- ferred, scrapped, etc. Please be ble or modify the part. Doing so advised in advance that Toyota does could result in a malfunction or not accept any liability for loss or dam- damage.
Page 121
1-4. Theft deterrent system NOTICE Do not poke or scratch the surface of the fingerprint sensor with a pen or other sharp object. Doing so could damage the surface of the fin- gerprint sensor. The part may become dirty with prolonged use.
Vehicle status informa- tion and indicators 2-1. Instrument cluster Warning lights and indicators ........122 Gauges and meters (with 4.2- inch display)....129 Gauges and meters (with 7- inch display)....133 Multi-information display (4.2- inch display)....137 Multi-information display (7- inch display)....146 Head-up display....157 Fuel consumption screen .161...
2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster and outside rear view mirrors inform the driver of the status of the vehi- cle’s various systems. Warning lights and indicators displayed on the instrument cluster With 4.2-inch display The units used on the meters and some indicators may differ depending on the tar-...
Page 124
2-1. Instrument cluster With 7-inch display The units used on the meters and some indicators may differ depending on the tar- get region. The image may differ from the actual condition.
Page 125
2-1. Instrument cluster Warning lights RCD OFF indicator equipped) (P.702) Warning lights inform the driver of Toyota parking assist- malfunctions in the indicated vehi- *3, 4 sensor OFF indicator cle’s systems. (if equipped) (P.702) PKSB OFF indicator Brake system warning equipped) (P.702)
Page 126
LTA indicator are not available to help protect you in equipped) (P.319) an accident, which could result in death or serious injury. Have the vehi- LDA indicator cle inspected by your Toyota dealer (Orange) equipped) (P.328) immediately if this occurs.
Page 127
RCTA OFF indicator equipped) (P.267) (if equipped) (P.380) Low speed four-wheel RCD OFF indicator drive indicator light equipped) (P.385) (P.475) Toyota parking assist- Center differential lock *4, 5, sensor OFF indicator indicator (P.476) (if equipped) (P.373) Front differential lock indicator (if equipped)
Page 128
: The light comes on when the system Sport mode indicator is turned off. equipped) (P.473) Comfort mode indica- : Toyota parking assist-sensor OFF indicator turns on when the engine (if equipped) switch is turned to ON while the (P.473)
Page 129
2-1. Instrument cluster off, there may be a malfunction in the system. If this occurs, have the vehicle inspected by your Toyota dealer.
2-1. Instrument cluster Gauges and meters (with 4.2-inch display) Meter display Locations of gauges and meters The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Engine oil pressure gauge Displays the engine oil pressure Outside temperature (P.130)
Page 131
When “--” or “E” is displayed, the sys- excessive engine braking and possi- tem may be malfunctioning. bly an accident resulting in death or Take your vehicle to your Toyota injury. dealer. Displays the outside temperature NOTICE within the range of -40°C (-40°F) to...
Page 132
Toyota dealer, as tem. there may be a problem with the lubri- cation system. ...
Page 133
2-1. Instrument cluster To reset the minutes display Press the of the meter control switches to change the Press of the meter display contents. control switches on the steering When the setting is completed, press wheel and select to return to the previous screen. Press of the meter ...
2-1. Instrument cluster Gauges and meters (with 7-inch display) Meter display Locations of gauges and meters The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Engine oil pressure gauge Displays the engine oil pressure Multi-information display...
Page 135
When “--” or “E” is displayed, the sys- excessive engine braking and possi- tem may be malfunctioning. bly an accident resulting in death or Take your vehicle to your Toyota injury. dealer. Displays the outside temperature NOTICE within the range of -40°C (-40°F) to...
Page 136
Toyota dealer, as tem. there may be a problem with the lubri- cation system. ...
Page 137
2-1. Instrument cluster To reset the minutes display Press the of the meter control switches to change the Press of the meter display contents. control switches on the steering When the setting is completed, press wheel and select to return to the previous screen. Press of the meter ...
2-1. Instrument cluster Multi-information dis- The multi-information display is play (4.2-inch display) displayed when The engine switch is in ON. When changing driving mode Display contents Background color of the multi-informa- Following information is displayed tion display is changed following the Multi-terrain Select mode.
Page 139
2-1. Instrument cluster the hands-free system, refer to Icon Display “Navigation and Multimedia Sys- tem Owner’s Manual”. Settings display (P.141) : On screens where the screen can be scrolled and the display can be Warning message display switched, a scroll bar or a round icon (P.145) that shows the number of registered screens is displayed.
Page 140
2-1. Instrument cluster ing fuel. (P.139) Distance to empty Eco Driving Indicator Displays the driving range with remain- ing fuel. (P.139) Current fuel economy Displays the instantaneous current fuel Economy. Average fuel economy Displays the average fuel economy since the function was reset or the average fuel economy after starting or *1, 2, 3 refueling.
Page 141
2-1. Instrument cluster result, the actual distance that can be Navigation system-linked dis- driven may differ from that displayed. play (if equipped) When only a small amount of fuel is Select to display the following navi- added to the tank, the display may not gation system-linked information.
Page 142
2-1. Instrument cluster : These items are reset each time the off or the volume, etc. is changed engine stops. on the setting screen, the setting “Total” is changed each time • “Average Speed”: Displays the aver- pressed. age vehicle speed since the display •...
Page 143
“Volume” Select to change each notification level used to notify the driver when the sys- Select to set the volume of the buzzer tem recognizes a speed limit sign. which sounds when the Toyota parking assist-sensor is operated.
Page 144
2-1. Instrument cluster & Start system will operate when the Dynamic radar cruise “A/C” switch of the air conditioning sys- control with full-speed range tem is on. (if equipped) (P.335) “TPWS” (Tire Pressure Warning Dynamic Radar Cruise Control System) (if equipped) (P.663) with Road Sign Assist (if •...
Page 145
2-1. Instrument cluster free phone system (if equipped) Settings • Audio operation (if equipped) “Language” • Volume operation (if equipped) Select to change the language on the • Voice control (if equipped) multi-information display. • Stop & Start system duration (if ...
Page 146
2-1. Instrument cluster turn the headlights off is displayed. NOTICE To turn the headlights off, select During setting up the display “Yes”. To prevent battery discharge, ensure If the driver’s door is opened after the that the engine is running while set- ting up the display features.
2-1. Instrument cluster displayed depending on the situa- Multi-information dis- tion. (P.365) play (7-inch display) Display contents Following information is displayed on the multi-information display. Driving support system informa- tion Display the operational status of the fol- lowing systems: • LTA (Lane Tracing Assist) (if equipped) (P.314) •...
Page 148
2-1. Instrument cluster displayed. For details regarding The multi-information display is the hands-free system, refer to displayed when “Navigation and Multimedia Sys- The engine switch is in ON. tem Owner’s Manual”. When changing driving mode : On screens where the screen can be Background color of the multi-informa- scrolled and the display can be tion display is changed following the...
Page 149
2-1. Instrument cluster Type” also provides the selection of the Icon Display gadget display type between “Total” Vehicle information display and “Trip”. (P.154) (P.150) • No Display: No item Settings display (P.151) • Average speed After start: Displays average vehicle Warning message display speed since the engine start.
Page 150
2-1. Instrument cluster play may not be updated. Eco Driving Indicator Light : Use the displayed fuel consumption During Eco-friendly acceleration opera- as a reference only. tion (Eco driving), the Eco Driving Indi- : The default setting is no display. cator Light will turn on.
Page 151
2-1. Instrument cluster equipped) (P.335) Distance to empty Dynamic radar cruise control (if This distance is computed based on equipped) (P.348) your average fuel consumption. As a result, the actual distance that can be Cruise control (if equipped) driven may differ from that displayed.
Page 152
2-1. Instrument cluster Toyota parking assist-sensor (if is changed each time equipped) (P.372) pressed. BSM (Blind Spot Monitor) (if • For functions that allow opera- equipped) (P.367) tion contents, display contents, RCTA (Rear Cross Traffic Alert) etc., of function to be selected, (if equipped) (P.379)
Page 153
“Volume” Select to enable/disable the vehicle Select to set the volume of the buzzer sway warning. which sounds when the Toyota parking “Sway Sensitivity” assist-sensor is operated. Select to set the vehicle sway warning RCTA (Rear Cross Traffic sensitivity.
Page 154
2-1. Instrument cluster quantity of curve speed reduction func- HUD (Head-up display) tion. (P.158) Vehicle Settings Select to change the head-up dis- play setting. PBD (Power Back Door) (if equipped) (P.173) RSA (Road Sign Assist) (if equipped) (P.331) Select to set up the following items. •...
Page 155
2-1. Instrument cluster Select to change the units of measure Speed. displayed. Select Gadget Rear Seat Reminder (P.766) Select to change the Gadget setting. Select to enable/disable the rear seat Drive information type (P.148) reminder function. Select to change the drive information ...
Page 156
2-1. Instrument cluster while driving. When changing set- switches. tings, park the vehicle in a safe place. Suggestion to turn on the If a warning message is displayed, headlights operation of the settings display will be suspended. If the headlight switch is in other Settings for functions not equipped to than , and the vehicle...
Page 157
2-1. Instrument cluster Suggestion to close the power windows (Driving at high speeds) If the vehicle speed exceeds a cer- tain speed with a power window open, a suggestion message will be displayed asking if you wish to close the power windows. To close all of the power windows, select “Yes”.
2-1. Instrument cluster Head-up display : If equipped The head-up display projects a variety of driving-related information and the operating state of the driving support systems on the wind- shield. System components Illustrations used in this text are intended as examples, and may differ from the image that is actually displayed by the head-up display.
Page 159
2-1. Instrument cluster glasses, especially polarized sun- Do not touch the inside of the head- glasses. Adjust the brightness of the up display projector or thrust sharp head-up display or remove your sun- edges or the like into the projector. glasses.
Page 160
2-1. Instrument cluster : Make sure to enable this display NOTICE when using the driving support sys- When changing the settings of tems the head-up display Display angle To prevent battery discharge, ensure that the engine is running while Select to adjust the angle of the head- changing the settings of the head-up up display.
Page 161
2-1. Instrument cluster Brake Override System When a pop-up display is displayed (P.232) When a pop-up display is displayed, a Drive-Start Control (P.237) current display may no longer be dis- played. In this case, the display will Details of content displayed on the return after the pop-up display disap- head-up display may differ from that pears.
When “--” or “E” is displayed, the sys- Vehicles with 7-inch or 9-inch tem may be malfunctioning. Take your display vehicle to your Toyota dealer. Multimedia system screen “MENU” button Vehicles with 12.3-inch display...
Page 163
Vehicles with 12.3-inch display and the average fuel consumption Select on the Toyota multi- since the last updated. operation touch (P.602). Use the displayed average fuel con- Select “Trip Info” from split- sumption as a reference.
Page 164
2-1. Instrument cluster Select “History” on the split- vary slightly from actual conditions. screen. Updating the history data Update the latest fuel consumption by selecting “Update” to measure the cur- rent fuel consumption again. Resetting the data The fuel consumption data can be deleted by selecting “Clear”.
Before driving 3-1. Key information Keys........166 3-2. Opening, closing and locking the doors Side doors ......169 Back door ......173 Smart entry & start system190 3-3. Adjusting the seats Front seats......195 Rear seats ......196 Head restraints ....205 3-4. Adjusting the steering wheel and mirrors Steering wheel....208...
If the battery becomes low, an alarm to the vehicle can be confirmed. Ask will sound in the cabin when the your Toyota dealer. engine stops. To reduce key battery depletion when the electronic key is to not be used for...
Page 168
If this message is displayed but you properly. have not had a new electronic key regis- In case of a smart entry & start tered, ask your Toyota dealer to check if system malfunction or other key- an unknown electronic key (other than related problems those in your possession) has been reg- P.728...
Page 169
3-1. Key information Sounds the alarm (P.168) : These settings must be customized at your Toyota dealer. : If equipped Panic mode (if equipped) When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will...
Grip the pas- : These settings must be customized senger’s door handle with the at your Toyota dealer. sensor (if equipped) to unlock all : If equipped the doors. Switching the door unlock function...
Page 171
3-2. Opening, closing and locking the doors least 5 seconds, and repeat step 3.) dows and moon roof are operating. Security feature Multi-information Unlocking function If a door is not opened within approxi- display/Beep mately 30 seconds after the vehicle is Holding the driver’s unlocked, the security feature automati- door handle...
Page 172
3-2. Opening, closing and locking the doors luggage, etc. in the rear seat, when Do not pull the inside handle of the the engine switch is turned to OFF doors while driving. after any of the following conditions Be especially careful for the driver’s are met, a buzzer will sound and a door and front passenger’s door message will be displayed on the...
Page 173
3-2. Opening, closing and locking the doors Using the inside lock buttons Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Locks the door Unlocks the door The driver’s door and front passenger’s door (for some models only) can be opened by pulling the inside door han- dle even if the lock button is in the lock...
3-2. Opening, closing and locking the doors Back door Function Operation All doors are locked when the The back door can be Speed linked door vehicle speed is locked/unlocked and locking function approximately 20 opened/closed by the follow- km/h (12mph) or ing procedures.
Page 175
3-2. Opening, closing and locking the doors When closing the back door, take WARNING extra care to prevent your fingers Operating the back door etc. from being caught. Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury.
Page 176
3-2. Opening, closing and locking the doors Unlocking and locking the Opening/closing the back back door from the outside door (vehicles without power back door) Using the entry function Open Carry the electronic key to enable this function. Raise the back door while pressing up the back door opener to release the lock to open the back door.
Page 177
Do not touch the damper stay rod with gloves or other fabric items. Do not attach any accessories other than genuine Toyota parts to Turn the cover. the back door. Do not place your hand on the damper stay or apply lateral forces to it.
Page 178
3-2. Opening, closing and locking the doors again during the halted operation, the When the back door is locked: While back door will perform the reverse carrying the electronic key on your per- operation. son, press and hold the back door opener switch.
Page 179
& lock (Walk- : These settings must be customized Away) function will go into standby. at your Toyota dealer. Close all of the doors except the back door, carrying an electronic key and press the switch on the lower part of the back door.
Page 180
3-2. Opening, closing and locking the doors again during the halted operation, the • The engine switch is in OFF, or back door will be closed. ON with the shift lever in P. • The kick sensor operation is enabled (P.153). •...
Page 181
: If equipped approximately 10 cm (3.9 in.) of : These settings must be customized the rear bumper and then pulling at your Toyota dealer. it back. The Hands Free Power Back Door Perform the entire kick operation within enables automatic closing and lock- 1 second.
Page 182
3-2. Opening, closing and locking the doors while a foot is detected under the rear gency flashers will flash. (P.170) bumper. The standby state is canceled if you do Operate the Hands Free Power Back not move away from the back door in Door without contacting the rear 30 minutes.
Page 183
3-2. Opening, closing and locking the doors operations, the back door operates for When the following procedure is per- any of the following conditions: formed, all the doors except the power • Parking brake is engaged back door are locked and then power •...
Page 184
3-2. Opening, closing and locking the doors Situations in which the close & lock your Toyota dealer. (Walk-Away) function may not Kick sensor operating conditions operate properly (vehicles with Hands Free Power In the following situations, the function Back Door)
Page 185
: If equipped such as a ball, moves under the rear bumper : These settings must be customized at your Toyota dealer. When an object is moved from under the rear bumper If someone is swinging their legs while sitting on the rear bumper...
Page 186
Door does not operate properly. Move the lever. : If equipped : These settings must be customized at your Toyota dealer. When reconnecting the battery To enable the power back door to oper- ate properly, close the back door manu- ally.
Page 187
When caught. installing an accessory part to the back door, using a genuine Toyota If anyone is in the vicinity, make part is recommended. sure they are safe and let them...
Page 188
Do not attach any accessories cause any of your belongings to get other than genuine Toyota parts to caught. the back door. When putting your foot under the...
Page 189
If it does not operate, have the ent buzzer than the normal one has vehicle inspected by your Toyota sounded. dealer. Additionally, when the power back...
Page 190
3-2. Opening, closing and locking the doors position. Changing settings of the power back door system (vehicles with power back door) The settings of the power back door system can be changed by display- ing the “Vehicle Settings” - “PBD” screen from the screen of the multi-information display.
3-2. Opening, closing and locking the doors loading. Smart entry & start sys- The following operations can be performed simply by carry- ing the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
Page 192
3-2. Opening, closing and locking the doors When an exterior alarm sounds once Antennas inside the cabin for 5 seconds Effective range (areas within which Correction proce- Situation the electronic key is detected) dure An attempt was Close all of the made to lock the doors and lock the vehicle while a...
Page 193
3-2. Opening, closing and locking the doors Turning an electronic key to bat- • Cigarette boxes that have aluminum tery-saving mode foil inside • Metallic wallets or bags When battery-saving mode is set, bat- • Coins tery depletion is minimized by stop- •...
Page 194
3-2. Opening, closing and locking the doors the system may not operate properly When the lock operation is performed in the following cases: using the lock sensor, recognition sig- • The electronic key is too close to the nals will be shown up to two consecu- window or outside door handle, near tive times.
Page 195
Use the wireless remote control or such medical devices. mechanical key. (P.169, 728) Ask your Toyota dealer for details for Starting the engine and changing disabling the entry function. engine switch modes: P.728 Stopping the engine: P.258...
3-3. Adjusting the seats Front seats 3-3.Adjusting the seats Seat position control switch Seatback angle control switch The seats can be adjusted Seat cushion (front) angle con- (longitudinally, vertically, etc.). trol switch Adjust the seat to ensure the correct driving posture. Vertical height control switch Lumbar support control switch Adjustment procedure...
3-3. Adjusting the seats Rear seats WARNING Do not put your hands under the seat or near the moving parts to The reclining angle can be avoid injury. adjusted and the seatback can Fingers or hands may become be folded by operating the jammed in the seat mechanism.
Page 198
3-3. Adjusting the seats Adjusting the reclining angle Do not fold the seatback more than required. During a collision, your body could slip beneath the seat belt result- ing in extreme pressure being applied to your abdomen, or the shoulder belt could wrap around your neck, which may result in death or serious injury.
Page 199
3-3. Adjusting the seats buckle. seat springs up. Pass the outer seat belts through the seat belt hangers and secure the seat belt plates. This prevents the shoulder belt from being damage. Make sure that the seat belts are removed from the hangers before using them.
Page 200
3-3. Adjusting the seats ion, and install them on the seat cult, loosen the belt. hooks. Stow the hook and tumble band, and then close the cover WARNING When tumbling the second seat Do not sit on or place anything on the seatback while driving.
Page 201
3-3. Adjusting the seats Push the seat until it is locked. WARNING When returning the seat to its original position Make sure the seat legs are securely latched to the floor when putting back the seats. Lift the seatback. Lift it until it is locked. When returning the second seat to the original position, be careful not to get your hand or foot of the third...
Page 202
3-3. Adjusting the seats floor when the seatback is folded. When stowing the third seat (manual type) Before stowing the third seats Pass the seat belts through the seat belt hangers and secure the seat belt plates. This prevents the shoulder belt from being damage.
Page 203
3-3. Adjusting the seats Returning the third seat WARNING (manual type) to its original After returning the seat to its original position position After returning the seat to its origi- Pull the lever while lifting the nal position, gently shake it to the front and rear and check that it is seatback secure...
Page 204
After the buzzer sounds twice, the seat- your Toyota dealer. back will be folded down and the head restraint and seat cushion will be auto- When stowing the third seat matically stowed in the floor.
Page 205
3-3. Adjusting the seats Returning the third seat (power type) to its original position Push and hold the return switch to return the third seats. After the buzzer sounds twice, the seat- back and seat cushion will be started to move.
3-3. Adjusting the seats Head restraints WARNING Lift the head restraint to its original position Head restraints are provided for all seats. WARNING Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
Page 207
3-3. Adjusting the seats Second center seat Folding the head restraint (third seats) (if equipped) Down Folding the head restraint Push the head restraint down while Fold the head restraint while pulling the pressing the lock release button strap. Adjusting the height of the head To return the head restraint, pull it up.
Page 208
3-3. Adjusting the seats Second center seat Second center seat Pull the head restraint up while Align the head restraint with the pressing the lock release button installation holes and push it down to the lock position. Press and hold the lock release button If the head restraint touches the ceiling, making the removal difficult, change the when lowering the head restraint.
3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors Adjustment procedure Manual adjustment type Hold the steering wheel and pull the lever down. Down Toward the driver Away from the driver The power adjustment type steer- ing wheel can be adjusted when The engine switch is in ACC or ON.
Page 210
3-4. Adjusting the steering wheel and mirrors Sounding the horn WARNING Caution while driving To sound the horn, press on or Do not adjust the steering wheel while close to the mark. driving. Doing so may cause the driver to mis- handle the vehicle and cause an acci- dent, resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suf- ficient confirmation of the rear view. Adjusting the height of rear Normal position view mirror Anti-glare position The height of the rear view mirror ...
3-4. Adjusting the steering wheel and mirrors Outside rear view mir- To prevent sensor error (vehicles rors with auto anti-glare inside rear view mirror) To ensure that the sensors operate The rear view mirror’s position properly, do not touch or cover them. can be adjusted to enable suf- ficient confirmation of the rear view.
Page 213
3-4. Adjusting the steering wheel and mirrors NOTICE Mirror angle can be adjusted when The engine switch is in ACC or ON. If ice should jam the mirror Do not operate the control or scrape Automatic adjustment of the mirror the mirror face.
Page 214
3-4. Adjusting the steering wheel and mirrors extending of the mirrors to be linked to The adjusted angle will be memo- locking/unlocking of the doors. rized and the mirror will automati- cally tilt to the memorized angle Using automatic mode in cold whenever the shift lever is shifted to weather (vehicles with automatic R from next time.
3-5. Opening, closing the windows and moon roof Power windows opened slightly. 3-5.Opening, closing the windows and moon roof Catch protection function If an object becomes caught between Opening and closing the the door and window while the window power windows is opening, window movement is stopped.
Page 216
If the window reverses and cannot be caught in the power window. Also, fully closed or opened, have the vehicle when riding with a child, it is recom- inspected by your Toyota dealer. mended to use the window lock switch. (P.216) Door lock linked window operation...
Page 217
3-5. Opening, closing the windows and moon roof after reconnecting the battery. WARNING Catch protection function Never use any part of your body or clothing to intentionally activate the catch protection function. The catch protection function may not work if something gets caught just before the window is fully opened.
(P.169) Vehicles with intrusion sensor: if the moon roof is closed using the door lock linked window operation when the alarm system is set, the alarm may be triggered. : These settings must be customized at your Toyota dealer.
Page 219
If the moon roof does not fully close opens slightly even after performing the above proce- Stop the vehicle. dure correctly, have the vehicle inspected by your Toyota dealer. Press and hold the “CLOSE” switch. Moon roof open reminder function The moon roof will close, re-open...
Page 220
3-5. Opening, closing the windows and moon roof WARNING When using the wireless remote control or mechanical key and oper- ating the moon roof, operate the moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the moon roof.
3-6. Favorite settings Driving position mem- 3-6.Favorite settings Enabling easier driver entry and exit (power easy access system) : If equipped When all of the following have been This feature automatically performed, the driver’s seat and adjusts the positions of the steering wheel are automatically driver’s seat, steering wheel, adjusted to a position that allows...
Page 222
3-6. Favorite settings position, etc. will be overwritten. Customization The seat movement amount settings of the power easy access system can be customized. (Customizable features: P.767) WARNING While the power easy access system is operating and the steering wheel and seat is mov- Seat position that can be memo- Be careful not to get body parts or rized (P.195)
Page 223
For or ON. details, contact your Toyota dealer. The seat, steering wheel and head-up display (if equipped) (only when the engine switch is in ON) will move to the...
Page 224
3-6. Favorite settings Memory recall function cancela- Driving position registration pro- tion procedure cedure Initialize the driver registered settings in Record your driving position to button My Settings (P.227). “1”, “2” or “3” before performing the fol- lowing: When My Settings is turned on Carry only the key you want to register, (to identify an individual with...
3-6. Favorite settings equipped) will move to the recorded My Settings position. However, the seat will move to a position slightly behind the recorded position in order to make entering the Drivers are identified using vehicle easier. devices such as electronic If the driving position is in a position keys to store the driving posi- that has already been recorded, the...
Page 226
3-6. Favorite settings tion display. Recalled functions Registering an electronic key When an individual is identified assignment (registering from from an authentication device, set- the “New Key Detected” tings for the following functions are screen) recalled. Ensure that the electronic key to ...
Page 227
3-6. Favorite settings Registering an electronic key Select “Setting” and then press assignment (registering from screen of the multi-infor- Select “Key Sync Change” and mation display) then press An electronic key is assigned and registered for the current driver. Select “Key Deletion” and then Select My Settings in screen press...
Page 228
3-6. Favorite settings Select “Driver Initialization” and Select My Settings in screen then press / “Vehicle Settings” screen of the multi-information display, Select “Yes” and then press and then press Select “Setting” and then press When initialization is complete, a mes- sage “Driver Initialized”...
Page 229
3-6. Favorite settings The “Adjust Position” screen is displayed. Select “Yes” and then press If “Guest” was selected, the “Adjust Position” screen will not be displayed. “Guest” mode Vehicles are delivered without any authentication devices registered. The system will operate in “Guest” mode until registration is performed.
Parking Support Brake function ........288 (rear pedestrians) ...399 Rear window wiper and Rear view monitor system washer ......292 Toyota parking assist monitor 4-4. Refueling ........408 Opening the fuel tank cap.294 Multi-terrain Monitor..421 4-5. Using the driving support Driving mode select systems switch......473...
Page 231
Four-wheel drive system ..475 Front differential lock system ........478 Rear differential lock system ........480 Crawl Control (with Turn Assist function) ....481 Multi-terrain Select....486 Downhill assist control system ........489 DPF (Diesel Particulate Filter) system ......491 Driving assist systems ..494 4-6. Driving tips Off-road precautions..502 Winter driving tips...
4-1. Before driving Driving the vehicle Press the engine switch to stop 4-1.Before driving the engine. Lock the door, making sure that The following procedures you have the key on your per- should be observed to ensure son. safe driving: If parking on a hill, block the wheels as needed.
Page 233
(if equipped) while km/h [50 mph]) the system is operating. (P.703) Steep hill driving or contin- Approxi- Breaking in your new Toyota uous driving at 100 km/h mately 1 To extend the life of the vehicle, observ- (62 mph) or more (race...
Page 234
4-1. Before driving Operating your vehicle in a foreign During normal driving, do not turn country off the engine. Turning the engine Comply with the relevant vehicle regis- off while driving will not cause loss tration laws and confirm the availability of steering or braking control, but of the correct fuel.
Page 235
Do not let the vehicle roll backward Have the brake pads checked and while the shift lever is in a driving replaced by your Toyota dealer as position, or roll forward while the soon as possible. shift lever is in R.
Page 236
4-1. Before driving If the shift lever is moved before the WARNING low speed four-wheel drive indica- • The temperature inside the vehicle tor turns on/off, the transfer mode may cause the plastic lenses and may not be shifted completely. plastic material of glasses to The transfer mode disengages both deform or crack.
Page 237
4-1. Before driving Avoiding damage to vehicle WARNING parts If the brake booster device does not Do not turn the steering wheel fully operate, do not follow other vehi- in either direction and hold it there cles closely and avoid hills or sharp for an extended period of time.
Page 238
When the TRC is turned off (P.496), flooded road and the vehicle is sudden start restraint control also flooded, be sure to have your Toyota does not operate. If your vehicle have dealer check the following: trouble escaping from the mud or...
4-1. Before driving Cargo and luggage When you fold down the rear seats, long items should not be placed directly behind the front seats. Take notice of the following Never allow anyone to ride in the information about storage pre- luggage compartment.
Do not exceed 100 kg (220 lb.) cargo weight on the roof rack. poses are not covered by the Toyota warranty. Contact your Toyota dealer for NOTICE further information about addi- When loading cargo on the roof tional requirements such as...
Page 241
Retighten all bolts securing the hitch- ing ball and bracket after towing for Towing hitch/bracket approximately 1000 km (600 miles). Toyota recommends the use of the WARNING Toyota hitch/bracket for your vehi- cle. Other products of a suitable Follow all the instructions described in this section.
Page 242
4-1. Before driving cannot be easily removed or Weight of the trailer itself plus the trailer load should be within the maximum repositioned. towing capacity. Exceeding this weight Towing devices must be is dangerous. (P.744) removed or repositioned when When towing a trailer, use a friction not in use.
Page 243
4-1. Before driving The values for towing capacity were WARNING derived from testing conducted at sea When the gross vehicle mass level. Take note that engine output and limit or maximum permissible towing capacity will be reduced at high axle capacity is exceeded altitudes.
Page 244
4-1. Before driving 76.9 mm (3.0 in.) 106.5 mm (4.2 in.) 137.5 mm (5.4 in.) 160.5 mm (6.3 in.) 136 mm (5.4 in.) 183.5 mm (7.2 in.) 211.1 mm (8.3 in.) 1272 mm (50.1 in.) Removing hitch cover NOTICE When the rear bumper strength- Remove the clips.
Page 245
4-1. Before driving Type B injury, keep the following in mind when towing: Checking connections between trailer and lights Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
Page 246
As soon Break-in schedule as such vehicle movement occurs, Toyota recommends that vehicles fitted with new power train components immediately start to decelerate should not be used for towing trailers for smoothly by slowly applying the the first 800 km (500 miles).
4-1. Before driving reduce speed. Pintle hook Do not increase speed. Do not apply vehicle brakes. : If equipped If you make no extreme correction with the steering or brakes, your vehicle and The pintle hook can be used trailer should stabilize (if enabled, Trailer for towing.
4-1. Before driving departure angle is reduced. Be careful Electric winch not to interfere with road surface while driving through rough terrain. : If equipped Winch cover Hook holder Winch clutch opening Winch opening Remote control terminal Hook Dust cap...
Page 249
4-1. Before driving Winch clutch lever Wire plug Remote control Removing the winch cover You can find the winch clutch lever and remote control in the storage bag on Raise the cover as shown in the the front passenger seat. illustration.
Page 250
4-1. Before driving Remove the hook holder and Preparing to use the winch pull out the cable by hand. Park the vehicle straight ahead of the object you want to pull. Hold the hook and extend the cable as far as necessary. Remove the winch cover.
Page 251
4-1. Before driving Remove the dust cap of the When rewinding, rewind the cable remote control terminal and con- at the angle shown in the illustration nect the remote control wire to prevent the cable from jamming. plug to the terminal. How to use the winch When using the winch with the vehicle parked, shift the shift...
Page 252
4-1. Before driving Attaching the cable Attach the cable hook securely to the object to be pulled or to a stand- ing tree. The separate cable wrapped around the object must be at least as thick as the towing cable, and of sufficient strength.
Page 253
4-1. Before driving Stop the remote control switch Cable Pulling Force when about 1 m (3 ft.) of cable is Less than 1000 kg left. Single line (2204 lb.) Less than 2000 kg Double line (4409 lb.) Less than 3000 kg Triple line (6613 lb.) Freeing the vehicle when...
Page 254
Disconnect the remote control consult your Toyota dealer. wire plug from the terminal and Never use the winch to lift or move install the dust cap on the termi- people, or to lift objects.
Page 255
4-1. Before driving When handling the cable, wear WARNING thick gloves, preferably leather. Do Connect the remote control to the not let the cable slide through your winch only when using the winch. hands, as it may burn them or Remove the remote control when cause abrasions.
Page 256
4-1. Before driving Remote control NOTICE Avoid knocking the remote control The strength of the supplementary hard against other objects or drop- cable is weakened as its pulling ping it. angle exceeds 90 degrees (pulled horizontally). It may break if it is too Avoid operating the remote control short and the pulling angle is in heavy rain or immersing it in...
4-2. Driving procedures Engine (ignition) switch Press the engine switch quickly 4-2.Driving procedures but fully. When the vehicle has a fingerprint Performing the following oper- authentication system and the finger- ations when carrying the elec- print authentication system is on, the tronic key on your person buzzer will sound (a short beeping sound) after fingerprint authentication is...
Page 258
The engine immobilizer system may brake pedal, and then press the not have been deactivated. (P.109) engine switch. (P.728) Contact your Toyota dealer. Electronic key battery depletion If a message related to start-up is shown on the multi-information dis- P.166...
Page 259
When starting the engine tem may be malfunctioning. Have the Do not race a cold engine. vehicle inspected by your Toyota dealer immediately. If the engine becomes difficult to start or stalls frequently, have your...
Page 260
4-2. Driving procedures Press the engine switch shortly Changing engine switch and firmly. modes The engine will stop, and the meter dis- play will be extinguished. Modes can be changed by pressing Release the shift lever when pressing the engine switch with the brake the engine switch.
Page 261
4-2. Driving procedures Check that “ACCESSORY” or Auto power off function “IGNITION ON” on the multi- If the vehicle is left in ACC or ON (the information display is off. engine is not running) for more than 20 minutes with the shift lever in P, the NOTICE engine switch will automatically turn to OFF.
If the warning message go off, you may start the vehicle again. If the Neutral warning message do not go off, con- tact your Toyota dealer. (Condition in which the power is not transmitted) When driving with dynamic radar...
Page 263
Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the While the engine switch is shift lever can be shifted.
Page 264
4-2. Driving procedures cover the tip of the screwdriver with ating and driving on slippery road a rag. surfaces such as snow. Press the button to use second start mode. Press the button again to cancel sec- ond start mode. Press and hold the shift lock override button and then push the button on the shift knob.
This may indicate a malfunction in the automatic transmission system. Have Driving on a downhill the vehicle inspected by your Toyota On declines, there may be case where dealer immediately. the vehicle shifts down automatically to obtain engine braking. As a result of the downshifting, the engine speed may increase.
Page 266
When driving on slippery road may start the vehicle again. If the surfaces warning message do not go off, con- tact your Toyota dealer. Do not accelerate or shift gears sud- denly. When driving with dynamic radar Sudden changes in engine braking...
Page 267
Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the While the engine switch is shift lever can be shifted.
Page 268
4-2. Driving procedures Second start mode WARNING To prevent an accident when releasing the shift lock For starting on slippery road sur- Before pressing the shift lock override faces, such as on snow. button, make sure to set the parking brake and depress the brake pedal.
The left hand signals will flash 3 times. This may indicate a malfunction in the Left turn automatic transmission system. Have the vehicle inspected by your Toyota Turn signals can be operated when dealer immediately. The engine switch is in ON.
4-2. Driving procedures out. Parking brake The parking brake can be set or released automatically or manually. In automatic mode, the parking brake can be set or released automatically accord- ing to shift lever operation. Also, even in automatic mode, the parking brake can be set or released manually.
Page 271
4-2. Driving procedures parking brake. and the parking brake indicator • Operate the parking brake switch light will turn on. while depressing the brake pedal or Operate the shift lever with the the accelerator pedal. When using vehicle stopped and the brake this function, slowly depress the pedal depressed.
Page 272
Have the and there is the danger of the vehicle vehicle inspected by your Toyota dealer. moving that may lead to an accident Parking brake operation sound resulting in death or serious injury.
D or M to braking performance and increase allow smooth start off. brake wear. Have the vehicle inspected by your Toyota dealer Automatic transmission (with S immediately if this occurs. mode)
Page 274
Make sure that the parking brake indica- tor light goes off. (P.269) The driver’s door is not closed. The driver is not wearing the seat belt. When an inspection at your Toyota dealer is necessary The parking brake is engaged. When the brake hold standby indicator...
Page 275
4-2. Driving procedures • When the brake hold switch is NOTICE pressed while the downhill assist con- trol system is activated. When parking the vehicle • When the brake hold switch is The brake hold system is not pressed while the four-wheel drive designed for use when parking the control switch is turned to L4 mode.
4-3. Operating the lights and wipers Headlight switch Type B 4-3.Operating the lights and wipers The headlights can be oper- ated manually or automati- cally. Turning on the headlights Operating the switch turns on the lights as follows: Type A The front position, tail, license plate and instrument...
Page 277
4-3. Operating the lights and wipers position lights.) Daytime running lights Light reminder buzzer are not designed for use at night. A buzzer sounds when the engine switch is turned to ACC or OFF and the Headlight control sensor driver’s door is opened while the lights The sensor may not function properly if are turned on.
Page 278
4-3. Operating the lights and wipers engine switch to OFF. NOTICE Pull the lever toward you and release it To prevent battery discharge again to turn off the lights. Do not leave the lights on longer than necessary when the engine is not run- ning.
Page 279
Full luggage Driver it is not clear that your vehicle loading *8, 9 meets relevant standards, contact your Toyota dealer. : For vehicles with model code that has “W” as the last letter For vehicles with model code : Except for vehicles with model that has “V”...
Page 280
4-3. Operating the lights and wipers tions is met, while the headlights Occupancy and luggage load Dial (low beam) are on, the cornering conditions posi- lights will additionally turn on and Luggage tion Occupants light up the direction of movement load for the vehicle.
4-3. Operating the lights and wipers AHS (Adaptive High- vehicles ahead is partially not illuminated while all other areas beam System) continue to be illuminated with the high beams. : If equipped The shaded high beams help optimize The Adaptive High-beam Sys- forward visibility while reducing the daz- tem uses a front camera zling effect on the drivers of vehicles...
Page 282
4-3. Operating the lights and wipers turning will be illuminated more Activating the Adaptive brightly than other areas while driving High-beam System on a curve. When all of the following conditions Press the Adaptive High-beam are met, the shaded high beams will System switch.
Page 283
The system may be malfunctioning. • When the temperature of the front Have the vehicle inspected by your camera is extremely high Toyota dealer. • When the surrounding brightness Customization level is equal to that of headlights, tail lights or fog lights Some functions can be customized.
Page 284
4-3. Operating the lights and wipers return it to its original position. Turning the high beams The high beams are on while the lever on/off manually is pulled toward you, however, after the Switching to the high beams lever is returned to its original position, the low beams remain on for a certain Push the lever away from you.
4-3. Operating the lights and wipers AHB (Automatic High The Automatic High Beam indicator will come on when the system is operating. Beam) : If equipped The Automatic High Beam uses an in-vehicle front cam- era to assess the brightness of streetlights, the lights of vehi- cles ahead etc., and automati- cally turns the high beam on or...
Page 286
• The windshield is cracked or dam- The system may be malfunctioning. aged Have the vehicle inspected by your • The front camera is deformed or dirty Toyota dealer. • When the temperature of the camera sensor is extremely high • Surrounding brightness levels are...
Page 287
4-3. Operating the lights and wipers return it to its original position. Turning the high beam The high beams are on while the lever on/off manually is pulled toward you, however, after the Switching to the high beams lever is returned to its original position, the low beams remain on for a certain Push the lever away from you.
4-3. Operating the lights and wipers Rear fog light switch Fog light switch : If equipped The fog lights offer improved visibility in difficult driving conditions, such as in rain and fog. Operating procedure Front fog light switch Rear fog lights on Front and rear fog light switch Front fog lights on Front fog lights on...
4-3. Operating the lights and wipers only the rear fog lights off. Windshield wipers and washer Fog lights can be used when Vehicles with front fog lights Operating the lever can switch The front position lights are turned on. between automatic operation ...
Page 290
4-3. Operating the lights and wipers If equipped, wiper intervals can be Rain-sensing windshield wipers adjusted when intermittent opera- tion is selected. Increases the intermittent wind- shield wiper frequency Decreases the intermittent wind- shield wiper frequency Rain-sensing operation (“AUTO”) Low speed operation High speed operation Temporary operation...
Page 291
4-3. Operating the lights and wipers Increases the sensitivity Vehicles with rain-sensing windshield wipers Decreases the sensitivity With low speed windshield wiper opera- tion selected, wiper operation will be switched from low speed to intermittent wiper operation when the vehicle is sta- tionary.
Page 292
Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Operating the wiper lever Vehicles with camera cleaning washer: The washer will automatically operate Operating the switch oper- and clean the camera for the Toyota ates the rear window wiper as fol- parking assist monitor (P.415) and lows: Multi-terrain Monitor (P.463).
Page 294
Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
4-4. Refueling Opening the fuel tank 4-4.Refueling Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Perform the following steps to Wait until the sound cannot be open the fuel tank cap: heard before fully removing the...
Page 296
4-4. Refueling Opening the fuel tank cap NOTICE Refueling Pull the lever. Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission con- trol system to operate abnormally or damaging fuel system compo- nents or the vehicle’s painted sur- face.
4-4. Refueling WARNING When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
WARNING sists of the following drive Toyota Safety Sense assist systems and contrib- The Toyota Safety Sense is designed utes to a safe and comfortable to operate under the assumption that driving experience: the driver will drive safely, and is...
Page 299
In the following cases, the radar sensor sensor must be recalibrated. Con- Observe the following precautions. tact your Toyota dealer for details. Otherwise, the radar sensor may not operate properly, possibly leading to • When the radar sensor or front...
Page 300
If the part of the windshield in front that may obstruct the front camera. of the front camera is fogged up or Contact your Toyota dealer for covered with condensation or ice, details. use the windshield defogger to...
Page 301
In the following situations, perform the actions specified in the table. When the nor- mal operating conditions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions...
Page 302
4-5. Using the driving support systems • When the temperature around the radar sensor is outside of the operational range, such as when the vehicle is in the sun or in an extremely cold environment • When the front camera cannot detect objects in front of the vehicle, such as when driving in the dark, snow, or fog, or when bright lights are shining into the front camera •...
4-5. Using the driving support systems PCS (Pre-Collision System) : If equipped The pre-collision system uses a radar sensor and front camera to detect objects (P.302) in front of the vehicle. When the system determines that the possibility of a frontal collision with an object is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
Page 304
The countries and areas for each region listed in the table are current as of April 2021. However, depending on when the vehicle was sold, the coun- tries and areas of each region may be different. Contact your Toyota dealer for details.
Page 305
4-5. Using the driving support systems the possibility of a frontal collision is is a high possibility of a collision in high, the system applies greater the following situations, it will assist braking force in relation to how with Pre-collision warning and, if strongly the brake pedal is necessary Pre-collision braking.
Page 306
4-5. Using the driving support systems absorbers to help maintain an If the vehicle is stopped by the appropriate vehicle posture. operation of the pre-collision brak- ing function, the pre-collision brak- ing function operation will be WARNING canceled after approximately 2 sec- Limitations of the pre-collision onds.
Page 307
4-5. Using the driving support systems When inspecting the vehicle using WARNING a drum tester such as a chassis • If the accelerator pedal is being dynamometer or speedometer tes- depressed strongly, the steering ter, or when using an on vehicle wheel is being operated sharply, wheel balancer the brake pedal is being depressed...
Page 308
4-5. Using the driving support systems If the system is disabled, the PCS For region A: If the pre-collision warn- ing timing is changed, emergency warning light will turn on and a steering assist timing will also be message will be displayed on the changed accordingly.
Page 309
4-5. Using the driving support systems Pre-collision warning Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding and stopped Approx. 10 to 180 km/h (7 Approx. 10 to 180 km/h (7 vehicles to 110 mph) to 110 mph) For region A and B: Approx.
Page 310
4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding and stopped Approx. 40 to 80 km/h (25 Approx. 40 to 80 km/h (25 vehicles, bicyclists and to 50 mph) to 50 mph) pedestrians If any of the following occur while the emergency steering assist function is operat- ing, it will be canceled:...
Page 311
4-5. Using the driving support systems Region A and B • When there is a detectable object or other object by the roadside at the entrance of a curve Region C • When there are patterns or paint in front of your vehicle that may be mis- taken for a detectable object •...
Page 312
4-5. Using the driving support systems hole cover, steel plate, etc.), steps, or • For region A: While making a right/left a protrusion in front of your vehicle turn, when an oncoming vehicle or a • When passing under an object (road crossing pedestrian stops before sign, billboard, etc.) entering the path of your vehicle...
Page 313
4-5. Using the driving support systems • When part of a detectable object is hidden by an object, such as large baggage, an umbrella, or guardrail • When there are many things which can reflect the radio waves of the radar in the vicinity (tunnels, truss bridges, gravel roads, snow covered road that have tracks, etc.)
Page 314
4-5. Using the driving support systems • While making a left/right turn and for a few seconds after making a left/right turn • While driving on a curve and for a few seconds after driving on a curve • If your vehicle is skidding •...
4-5. Using the driving support systems If VSC is disabled LTA (Lane Tracing If VSC is disabled (P.496), the pre- Assist) collision brake assist and pre-collision braking functions are also disabled. : If equipped The PCS warning light will turn on and “VSC Turned OFF Pre-Collision Brake When driving on a road with System Unavailable”...
Page 316
Do not modify the suspension etc. If the driver must take adequate the suspension etc. needs to be breaks when fatigued, such as from replaced, contact your Toyota driving for a long period of time. dealer. Failure to perform appropriate driv-...
Page 317
4-5. Using the driving support systems Vehicle is driven where the road WARNING diverges, merges, etc. When the follow-up cruising dis- play is displayed (P.320) and the preceding vehicle is swaying. (Your vehicle may sway accordingly and depart from the lane.) When the follow-up cruising dis- play is displayed (P.320) and the preceding vehicle departs from its...
Page 318
4-5. Using the driving support systems The vehicle is struck by a cross- WARNING wind. The traffic lines are yellow (which The vehicle is affected by wind from may be more difficult to recognize a vehicle driven in a nearby lane. than lines that are white).
Page 319
4-5. Using the driving support systems Yaw assist function Vehicle sway warning function When the system determines that When the vehicle is swaying within the vehicle might depart from its a lane, the warning buzzer will sound and a message will be dis- lane or course , the system pro- played on the multi-information dis-...
Page 320
4-5. Using the driving support systems Lane centering function LTA system setting This function is linked with dynamic Turning the lane centering radar cruise control with full-speed function ON/OFF range or dynamic radar cruise con- Press the LTA switch. trol and provides the required assistance by operating the steer- The lane centering function will change ing wheel to keep the vehicle in its...
Page 321
4-5. Using the driving support systems ing: Alerts the driver that their input is Indications on multi-infor- necessary to stay in the center of the mation display lane (lane centering function). Lane departure alert function display Displayed when the multi-information display is switched to the driving sup- port system information display.
Page 322
4-5. Using the driving support systems port system information display. Yaw assist function This function operates when all of the Indicates that steering assist of the lane following conditions are met in addition centering function is operating by moni- to the operation conditions for the lane toring the position of a preceding vehi- departure alert function.
Page 323
4-5. Using the driving support systems • Vehicle does not accelerate or decel- function is occurred in the LTA sys- erate by a fixed amount or more. tem. • Steering wheel is not operated with a Lane departure alert function steering force level suitable for chang- The warning buzzer may be difficult to ing lanes.
Page 324
Also, if a different warning message is displayed, follow the instructions displayed on the screen. “LTA Malfunction Visit Your Dealer” The system may not be operating prop- erly. Have the vehicle inspected by your Toyota dealer. “LTA Unavailable”...
4-5. Using the driving support systems LDA (Lane Departure WARNING Alert with Yaw Assist Before using LDA system Function) Do not rely solely upon the LDA system. The LDA system does not automatically drive the vehicle or : If equipped reduce the amount of attention that must be paid to the area in front of When driving on a road with...
Page 326
Do not modify the suspension etc. If the suspension etc. needs to be replaced, contact your Toyota dealer. Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kan- garoo bar, etc.).
Page 327
4-5. Using the driving support systems The vehicle is struck by a cross- WARNING wind. The traffic lines are yellow (which The vehicle has just changed lanes may be more difficult to recognize or crossed an intersection. than lines that are white). Tires which differ by structure, man- The white (yellow) lines cross over ufacturer, brand or tread pattern are...
Page 328
4-5. Using the driving support systems Yaw assist function Vehicle sway warning function When the system determines that When the vehicle is swaying within the vehicle might depart from its a lane, the warning buzzer will sound and a message will be dis- lane or course , the system pro- played on the multi-information dis-...
Page 329
4-5. Using the driving support systems operating. Turning the LDA system Lane departure alert function display Press and hold the LDA switch Displayed when the multi-information The LDA indicator light turns off when display is switched to the driving sup- the LDA is turned OFF.
Page 330
4-5. Using the driving support systems • No system malfunctions are detected. Operation conditions of each func- (P.330) tion Temporary cancelation of functions Lane departure alert function When operation conditions are no lon- This function operates when all of the ger met, a function may be temporarily following conditions are met.
Page 331
“Lane Departure Alert Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. “LDA Unavailable” • The system is temporarily canceled due to a malfunction in a sensor other than the front camera. Turn the LDA system off, wait for a little while, and then turn the LDA system back on.
4-5. Using the driving support systems RSA (Road Sign Assist) Indication on the multi-infor- mation display : If equipped When the front camera recognizes The RSA system recognizes a sign and/or information of a sign specific road signs using the is available from the navigation sys- front camera and/or naviga- tem, the sign will be displayed on...
Page 333
4-5. Using the driving support systems Motorway entrance Motorway exit Expressway entrance If signs other than speed limit signs are recognized, they will be displayed in an overlapping stack under the current Expressway exit speed limit sign. Supported types of road Urban area beginning signs The following types of road signs,...
Page 334
4-5. Using the driving support systems No-overtaking road signs : Contents not recognized. : If the turn signal indicator is not operated when changing lanes, the No overtaking begins mark does not display. Notification function No overtaking ends In the following situations, the RSA ...
Page 335
The sign is only visible to the front The system may be malfunctioning. camera for a short amount of time. Have the vehicle inspected by your Toyota dealer. The driving scene (turning, lane change, etc.) is judged incorrectly. Customization If a sign not appropriate for the cur- Some functions can be customized.
4-5. Using the driving support systems Dynamic radar cruise Indicators control with full-speed Operation switches range : If equipped In vehicle-to-vehicle distance control mode, the vehicle auto- matically accelerates, deceler- ates and stops to match the speed changes of the preced- ing vehicle even if the acceler- ator pedal is not depressed.
Page 337
4-5. Using the driving support systems Cautions regarding the driving WARNING assist systems • Conditions under which the vehicle- Observe the following precautions, as to-vehicle distance control mode there are limitations to the assistance may not function correctly: P.347 provided by the system. Failure to do so may cause an accident resulting in Set the speed appropriately death or serious injury.
Page 338
4-5. Using the driving support systems When there is rain, snow, etc. on WARNING the front surface of the radar or Assisting the driver to operate the front camera vehicle In traffic conditions that require fre- The dynamic radar cruise control with quent repeated acceleration and full-speed range does not include deceleration...
Page 339
4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar to detect the presence of vehicles up to approx- imately 100 m (328 ft.) ahead, determines the current vehicle-to-vehicle fol- lowing distance, and operates to maintain a suitable following distance from the vehicle ahead.
Page 340
4-5. Using the driving support systems When the turn signal lever is operated and your vehicle moves to an overtaking lane while driving at 80 km/h (50 mph) or more, the vehicle will accelerate to help to over- take a passing vehicle. The system’s identification of what is an overtaking lane may be determined solely based on the location of the steering wheel in the vehicle (left side driver position versus right side driver position.) If the vehicle is driven to a region where the over-...
Page 341
4-5. Using the driving support systems speed. increased or decreased as follows: Fine adjustment: By 1 km/h (0.6 mph) or 1 mph (1.6 km/h) each time the switch is pressed Large adjustment: Increases or decreases in 5 km/h (3.1 mph) or 5 mph (8 km/h) increments for as long...
Page 342
4-5. Using the driving support systems Vehicle-to-vehicle Distance options distance Approximately 40 Medium m (130 ft.) Approximately 30 Short m (100 ft.) Resuming follow-up cruis- Long ing when the vehicle has Medium been stopped by system Short control (vehicle-to-vehicle distance control mode) If a vehicle is running ahead of you, the preceding vehicle mark will also be...
Page 343
4-5. Using the driving support systems Canceling and resuming the speed control Warnings may not occur when In the following instances, warnings may not occur even when the vehi- Pressing the cancel switch can- cle-to-vehicle distance is small. cels the speed control. ...
Page 344
4-5. Using the driving support systems Depending on the situation, the meter control switch is pressed. vehicle speed will then return to the vehicle-to-vehicle distance control Selecting constant speed mode set speed. control mode In situations where vehicle-to-vehi- cle distance control needs to oper- When constant speed control mode ate, such as when a preceding is selected, your vehicle will main-...
Page 345
4-5. Using the driving support systems The vehicle speed at the moment the switch is released becomes the set speed. Adjusting the speed setting: P.340 Canceling and resuming the speed set- ting: P.342 When the current set speed is higher than the recognized speed limit Press and hold the “-SET”...
Page 346
Contact your Toyota dealer. ing vehicle. Automatic cancelation of constant When the vehicle stops while fol-...
Page 347
Warning messages and buzzers are than the above, there may be a malfunc- used to indicate a system malfunction or tion in the system. Contact your Toyota to inform the driver of the need for cau- dealer. tion while driving. If a warning message...
Page 348
4-5. Using the driving support systems Preceding vehicle has an extremely When the vehicle ahead of you decel- high ground clearance erates suddenly When driving on a road surrounded by a structure, such as in a tunnel or on a bridge Situations in which the curve speed reduction function may not operate...
4-5. Using the driving support systems Dynamic radar cruise Operation switches control : If equipped In vehicle-to-vehicle distance control mode, the vehicle auto- matically accelerates and decelerates to match the speed changes of the preceding vehi- cle even if the accelerator Vehicle-to-vehicle distance pedal is not depressed.
Page 350
4-5. Using the driving support systems Assisting the driver to judge proper WARNING following distance Set the speed appropriately The dynamic radar cruise control depending on the speed limit, traffic determines whether the following dis- flow, road conditions, weather con- tance between the driver’s own vehi- ditions, etc.
Page 351
4-5. Using the driving support systems WARNING On steep downhills, or where there are sudden changes between sharp up and down gradients Vehicle speed may exceed the set speed when driving down a steep hill. At entrances to freeways and high- ways When weather conditions are bad enough that they may prevent the...
Page 352
4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. Example of deceleration cruising and follow-up cruising When a preceding vehicle driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automatically deceler- ates your vehicle.
Page 353
4-5. Using the driving support systems The system accelerates until the set speed is reached. The system then returns to constant speed cruising. speed. Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the cruise control main switch to activate the cruise con- trol.
Page 354
4-5. Using the driving support systems Fine adjustment: By 1 km/h (0.6 mph) or 1 mph (1.6 km/h) each time the switch is pressed Large adjustment: Increases or decreases in 5 km/h (3.1 mph) or 5 mph (8 km/h) increments for as long as the switch is held In the constant speed control mode (P.355), the set speed will be...
Page 355
4-5. Using the driving support systems Canceling and resuming the speed control Warnings may not occur when In the following instances, warnings may not occur even when the vehi- Pressing the cancel switch can- cle-to-vehicle distance is small. cels the speed control. ...
Page 356
4-5. Using the driving support systems Depending on the situation, the meter control switch is pressed. vehicle speed will then return to the vehicle-to-vehicle distance control Selecting constant speed mode set speed. control mode In situations where vehicle-to-vehi- cle distance control needs to oper- When constant speed control mode ate, such as when a preceding is selected, your vehicle will main-...
Page 357
Dynamic radar cruise control can reasons other than the above, there be set when may be a malfunction in the system. Contact your Toyota dealer. The shift lever is in D. Automatic cancelation of constant Depending on the control mode, this...
Page 358
4-5. Using the driving support systems than the above, there may be a malfunc- tion in the system. Contact your Toyota dealer. Situations in which the curve speed reduction function may not operate In situations such as the following, the...
4-5. Using the driving support systems Cruise control : If equipped Use the cruise control to main- tain a set speed without depressing the accelerator pedal. When steering wheel operation or your position in the lane is unstable System Components Meter display When the vehicle ahead of you decel- erates suddenly...
Page 360
4-5. Using the driving support systems cruise control. WARNING To avoid operating the cruise control by mistake Switch the cruise control off using the cruise control main switch when not in use. Situations unsuitable for cruise control Do not use cruise control in any of the following situations.
Page 361
4-5. Using the driving support systems Canceling and resuming the constant speed control Increases the speed Decreases the speed Fine adjustment: Press the switch. Pressing the cancel switch can- Large adjustment: Press and hold the cels the constant speed control. switch to change the speed, and release when the desired speed is The speed control is also canceled...
Have the vehicle inspected by your pedal and stop the vehicle. The Toyota dealer. engine will stop automatically. When the engine stops, the Stop & Start indicator will illuminate.
Page 363
4-5. Using the driving support systems When the brake hold system is Disabling the Stop & Start operating system When the engine is stopped by Press the Stop & Start cancel the Stop & Start system, if the switch to disable the Stop & Start brake pedal is released the system.
Page 364
• When the battery is not sufficiently may affect the Stop & Start system. charged, such as if the vehicle has Contact your Toyota dealer for details. been parked for a long time and the battery charge has decreased, the...
Page 365
4-5. Using the driving support systems • When the battery fluid temperature is engine start function. In this case, extremely low or high. restart the engine using the normal • For a while after the battery terminals engine starting procedure. (P.256) have been disconnected and recon- If the hood is closed after the engine nected.
Page 366
The battery may be deteriorated. Con- buzzer will sound and the Stop & Start system indicator will flash. To stop the tact your Toyota dealer for details. buzzer, close the driver’s door. The Stop & Start system protection “Stop & Start System Unavail- function able”...
Page 367
Stop & Start system may not The system may be malfunctioning. operate correctly. Have your vehicle Have the vehicle inspected by your inspected by your Toyota dealer. Toyota dealer. While the driver’s seat belt is fas- tened, the driver’s and front pas- senger’s seat belt reminder light...
4-5. Using the driving support systems BSM (Blind Spot Moni- NOTICE tor) Even though the driver’s door is open, the open door warning light does not illuminate or the interior : If equipped light does not illuminate when the interior light switch is in the door The Blind Spot Monitor is a position.
Page 369
When “Blind Spot Monitor Malfunc- tion Visit Your Dealer” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected at a Toyota dealer. Customization Some functions can be customized. (P.772) WARNING Meter control switches To ensure the system can oper- Turning the Blind Spot Monitor on/off.
Page 370
4-5. Using the driving support systems Do not paint the rear bumper any WARNING color other than an official Toyota Do not attach accessories, stickers color. (including transparent stickers), alu- minum tape, etc. to a sensor or its surrounding area on the rear Turning the Blind Spot Mon- bumper.
Page 371
4-5. Using the driving support systems Vehicles that are traveling in areas that are not visible using the outside rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are not visible using the outside rear view mirrors (the blind spots) The Blind Spot Monitor detection areas The areas that vehicles can be detected in are outlined below.
Page 372
4-5. Using the driving support systems Conditions under which the system The Blind Spot Monitor is opera- may not function correctly tional when The Blind Spot Monitor may not detect The Blind Spot Monitor is operational vehicles correctly in the following situ- when all of the following conditions are ations: met:...
4-5. Using the driving support systems Instances of the Blind Spot Monitor Toyota parking assist- unnecessarily detecting a vehicle sensor and/or object may increase in the fol- lowing situations: • When the sensor is misaligned due to : If equipped...
Page 374
Multi-information display When the Toyota parking assist-sensor function is disabled, the Toyota parking assist-sensor OFF indicator (P.125) illuminates on the multi-information dis- play. To re-enable the system, select the multi-information display, select and turn it on.
Page 375
Toyota dealer. If a sensor or the A sensor may be covered with water rear bumper needs to be drops, ice, snow, dirt, etc. Remove the removed/installed or replaced, con- water drops, ice, snow, dirt, etc., from...
Page 376
4-5. Using the driving support systems • It might be difficult to hear the buzzer On an extremely bumpy road, on an due to the volume of the audio system incline, on gravel, or on grass. or air flow noise of the air conditioning When vehicle horns, vehicle detec- system.
Page 377
4-5. Using the driving support systems Situations in which the system may When vehicle horns, vehicle detec- operate even if there is no possibil- tors, motorcycle engines, air brakes of ity of a collision large vehicles, the clearance sonar of other vehicles or other devices which In some situations, such as the follow- produce ultrasonic waves are near the...
Page 378
4-5. Using the driving support systems Sensor detection display, Approximately 100 cm (3.3 ft.) object distance Approximately 150 cm (4.9 ft.) Detection range of the sensors Approximately 60 cm (2.0 ft.) The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle.
Page 379
A mute button will be displayed on the multi-information display when an object is detected. To mute the buzzer, press “OK”. The buzzers for the Toyota parking assist-sensor, RCTA function and RCD function will be muted simulta- neously. Mute will be canceled automatically in the following situations: ...
4-5. Using the driving support systems RCTA (Rear Cross Traf- System components fic Alert) function : If equipped The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up.
Page 381
Turning the RCTA function display on/off There may be a sensor malfunction or misaligned. Have the vehicle inspected at your Toyota dealer. Use the meter control switches to enable/disable the RCTA function. Radar sensors P.368 (P.141, 151)
Page 382
To mute farther away. the buzzer, press OK. The buzzers for the Toyota parking Example: assist-sensor, RCTA function and RCD function will be muted simultaneously. Approaching vehi-...
Page 383
4-5. Using the driving support systems Conditions under which the system will not detect a vehicle When multiple vehicles are approach- The RCTA function is not designed to ing with only a small gap between detect the following types of vehicles each vehicle and/or objects: When a vehicle is approaching at high...
Page 384
4-5. Using the driving support systems or tires of a size other than specified are installed If the front of the vehicle is raised or lowered due to the carried load When turning while backing up When equipment that may obstruct a sensor is installed, such as a towing eyelet, bumper protector (an addi- tional trim strip, etc.), bicycle carrier,...
Do not install market electronic parts (such as Illuminated license plate, fog lamps, etc.) in the camera vicinity. Do not subject the camera vicinity to strong impacts. If the vicinity is subjected to a strong impact, have the vehicle inspected by your Toyota dealer.
Page 386
RCD OFF indicator (P.125) illumi- nates. The contents mentioned above are not observed. When a pedestrian is Suspensions other than Toyota genuine parts are installed. detected If the rear camera detection func- Center Display tion detects a pedestrian in the...
Page 387
If a pedestrian is detected in is detected. To mute the buzzer, press “OK”. area The buzzers for the Toyota parking Buzzer (When the vehicle is sta- assist-sensor, RCTA function and RCD function will be muted simultaneously. tionary): Sounds 3 times...
Page 388
4-5. Using the driving support systems Situations in which the system may puncture repair kit are used not operate properly Situations in which the system may Some pedestrians, such as the follow- operate unexpectedly ing, may not be detected by the rear Even though there are no pedestrians camera detection function, preventing in the detection area, some objects,...
4-5. Using the driving support systems flashers of another vehicle PKSB (Parking Support • When tire chains or an emergency tire Brake) puncture repair kit are used Situations in which the rear camera detection function may be difficult to : If equipped notice The Parking Support Brake •...
Page 390
4-5. Using the driving support systems Parking Support Brake func- When to disable the Parking Sup- tion (rear pedestrians) (if port Brake equipped) In the following situations, disable the Parking Support Brake as the system P.399 may operate even though there is no possibility of a collision.
Page 391
4-5. Using the driving support systems NOTICE If the four-wheel drive control switch is in L4 If “Parking Support Brake Parking Support Brake will be turned off Unavailable” is displayed on the automatically. multi-information display and the PKSB OFF indicator is flashing If this message is displayed immedi- Display and buzzer for ately after the engine switch is...
Page 392
4-5. Using the driving support systems ger-than-normal brake operation is nec- engine output will be restricted to essary. restrain any increase in the vehicle Navigation system (if equipped) or mul- speed. (Engine output restriction timedia system (if equipped) screen: control: See figure 2.) “BRAKE!”...
Page 393
Support Brake will be disabled and sor is clean, have the vehicle the PKSB OFF indicator will illuminate. If inspected by your Toyota dealer. the Parking Support Brake operates unnecessarily, brake control can be can- celed by depressing the brake pedal or...
Page 394
4-5. Using the driving support systems If a battery terminal has been dis- connected and reconnected The system needs to be initialized. To initialize the system, drive the vehicle straight ahead for 5 seconds or more at a speed of approximately 35 km/h (22 mph) or more.
4-5. Using the driving support systems Parking Support Brake function (static objects) : If equipped If the sensors detect a static object, such as a wall, in the traveling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving forward due to an accidental accelerator pedal operation, the vehicle moving the unin- tended direction due to the wrong shift position being selected, or...
Page 396
4-5. Using the driving support systems When the accelerator pedal is depressed excessively When the vehicle moves in the unintended direction due to the wrong shift position being selected Types of sensors If the Parking Support Brake function (static objects) operates P.372 unnecessarily, such as at a rail- road crossing...
Page 397
• The Parking Support Brake is Toyota parking assist-sensor. (P.377) enabled. Therefore, even if the Toyota parking • The vehicle speed is approximately 15 assist-sensor detects an object and pro- km/h (9 mph) or less.
4-5. Using the driving support systems Parking Support Brake function (rear-crossing vehi- cles) : If equipped If a rear radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and the system determines that the pos- sibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approaching vehicle.
Page 399
4-5. Using the driving support systems • Vehicles are approaching from the vehicle and provides an alert, the Park- right or left at the rear of the vehicle at ing Support Brake function (rear-cross- a traveling speed of approximately 8 ing vehicles) may not start operating.
4-5. Using the driving support systems Parking Support Brake function (rear pedestrians) : If equipped If the rear camera sensor detects a pedestrian behind the vehicle while backing up and the system determines that the possibility of colliding with the detected pedestrian is high, a buzzer will sound. If the system determines that the possibility of colliding with the detected pedestrian is extremely high, the brakes will be applied automatically to help reduce the impact of the collision.
Page 401
4-5. Using the driving support systems • The collision becomes avoidable with WARNING normal brake operation. • The pedestrian is no longer detected If the Parking Support Brake behind your vehicle. function (rear pedestrians) oper- ates unnecessarily Brake control • The Parking Support Brake is dis- Depress the brake pedal immediately abled.
4-5. Using the driving support systems Rear view monitor sys- : If equipped The rear view monitor system assists the driver by displaying guide lines and an image of the view behind the vehicle while backing up, for example while parking.
Page 403
Toyota parking assist-sensor display (if equipped) If an obstacle is detected while the Toyota parking assist-sensor is on, a • The area displayed on the display is shown at the top right corner screen may vary according to of the screen.
Page 404
4-5. Using the driving support systems image. In this case, flush it with a large actually are. In the same way, there will quantity of water and wipe the camera be a margin of error between the guide lens clean with a soft and wet cloth. lines and the actual distance/course on the road.
Page 405
4-5. Using the driving support systems objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the distance guide lines. When approaching a three-dimensional object that extends outward (such as the flat- bed of a truck), be careful of the fol- lowing.
Page 406
If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 407
When and how much to inspected by your turn the steering wheel will vary received a strong Toyota dealer. according to traffic conditions, road impact. surface conditions, vehicle condi- tion, etc. when parking. It is neces- ...
Page 408
Do not expose the camera to strong mirror before proceeding. impact as this could cause a mal- function. If this happens, have the vehicle inspected by your Toyota NOTICE dealer as soon as possible. How to use the camera The rear view monitor system may...
4-5. Using the driving support systems Toyota parking assist WARNING monitor Never depend on the parking assist monitor entirely when backing up. The image and the position of the : If equipped guide lines displayed on the screen The parking assist monitor may differ from the actual state.
Page 410
(P.416) Toyota parking assist-sensor When a sensor detects an obstacle, the Screen display direction of and the approximate dis- tance to the obstacle are displayed and The parking assist monitor screen the buzzer sounds.
Page 411
(P.411) the buzzer sounds. Estimated course lines are dis- Toyota parking assist-sensor played which move in accordance When a sensor detects an obstacle, the with the operation of the steering direction of and the approximate dis- wheel.
Page 412
4-5. Using the driving support systems Vehicle width guide lines Displays a guide path when the vehicle is being backed straight up. Estimated course lines Show an estimated course when the steering wheel is turned. Distance guide lines Distance guide line display mode Show distance behind the vehicle when (P.413) the steering wheel is turned.
Page 413
Distance guide line the estimated course lines are not in alignment, have the vehicle Shows distance behind the vehicle. inspected by your Toyota dealer. • Displays points approximately 0.5 m (1.5 ft.) (red) from the edge of the bumper. Vehicle center guide line Indicates the estimated vehicle center on the ground.
Page 414
4-5. Using the driving support systems Wide rear view Distance guide line display mode Screen description Rear view Vehicle width guide lines Displays a guide path when the vehicle is being backed straight up. • The displayed width is wider than the actual vehicle width.
Page 415
(1.5 ft.) (red) from the edge of the bumper will not be displayed. bumper. Wide rear view Toyota parking assist moni- tor precautions Area displayed on screen The parking assist monitor dis- plays an image of the view from the bumper of the rear area of the vehi- cle.
Page 416
If this happens, have the and wipe the camera lens clean vehicle inspected by your Toyota with a soft and wet cloth. dealer as soon as possible. Dirt on the camera lens can be...
Page 417
4-5. Using the driving support systems case, rinse the camera lens with away than they actually are. In the a large quantity of water and same way, there will be a margin of then wipe it clean with a soft error between the guide lines and cloth dampened with water.
Page 418
4-5. Using the driving support systems flat surfaced objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the estimated course lines and dis- tance guide lines. When approach- ing a three-dimensional object that extends outward (such as the flat- bed of a truck), be careful of the fol- lowing.
Page 419
If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 420
The camera or surround- The image is out of align- Have the vehicle inspected ing area has received a ment by your Toyota dealer. strong impact. The camera position is out Have the vehicle inspected of alignment. by your Toyota dealer.
Page 421
There is a malfunction in lines move even though Have the vehicle inspected the signals being output by the steering wheel is by your Toyota dealer. the steering sensor. straight Close the back door. If this does not resolve the Guide lines are not dis- The back door is open.
4-5. Using the driving support systems Multi-terrain Monitor Never drive while looking only at the screen as the image on the screen is different from actual con- : If equipped ditions. If you are driving while look- ing only at the screen, you may hit a The Multi-terrain Monitor helps person or an object, resulting in an the driver to check the vehicle...
Page 423
4-5. Using the driving support systems P.429 P.432 Front view (magnified) Under vehicle terrain view (rear wheel) & dual side views P.429 P.434 When checking the condition of Under vehicle terrain view (rear the road surface under the vehi- wheel) (magnified) ...
Page 424
4-5. Using the driving support systems P.441 P.437 When checking the area to the Wide rear view & dual side views front of the vehicle Wide front view & panoramic view P.437 P.442 Screens when the four-wheel ...
Page 425
4-5. Using the driving support systems P.444 P.457 When checking the area to the Rear view & dual side views rear of the vehicle Rear view & panoramic view P.457 Wide rear view & dual side views P.449 ...
Page 426
4-5. Using the driving support systems How to switch the screen When you press the VIEW switch while the engine switch is in ON, the monitor displays operates. The monitor displays various views of the position of the vehicle. (The fol- lowing is an example)
Page 427
4-5. Using the driving support systems Four-wheel drive control switch is in L4 or H4 and Multi-terrain Select (if equipped) is in on When the shift lever is in the P, D or N position Audio screen, etc. Front view & dual side views Under vehicle terrain view &...
Page 428
4-5. Using the driving support systems Select the return switch When the shift lever is in the R position Rear view & dual side views Wide rear view & dual side views Select the display mode switch Four-wheel drive control switch is in H4 and Multi-terrain Select (if equipped) is in off When the shift lever is in the P position Audio screen, etc.
Page 429
4-5. Using the driving support systems Select the display mode switch When the shift lever is in the D or N position Audio screen, etc. Wide front view & panoramic view Side Clearance View & panoramic view Cornering View & panoramic view Press the VIEW switch When the steering wheel is turned by 180°...
Page 430
4-5. Using the driving support systems When the shift lever is in the R switch is in L4 or H4 and Multi-ter- position rain Select is on, the various screens display information to sup- port several different driving situa- tions, such as when checking for obstacles when moving forward or in reverse, or when judging road surface conditions during off-road...
Page 431
4-5. Using the driving support systems If the steering wheel is turned 270° or more Selecting the display 0.5 m (1.5 ft.) distance guide line (red) 1 m (3 ft.) distance guide line (blue) 2 m (6 ft.) distance guide line (blue) Items indicate the estimated distance from the front end of the vehicle.
Page 432
Tilt meter Displays the vehicle’s estimated degree of incline. (P.431) Toyota parking assist-sensor/slip display Displayed if an obstacle is detected while the Toyota parking assist-sensor is turned Tilt meter matic display mode is available. In this mode, the screen is switched...
Page 433
4-5. Using the driving support systems After the engine switch is turned to The degree of incline showed on the ON, the degree of incline is not dis- tilt meter is only an approximate indi- played until such information is deter- cation, and may differ from the degree mined.
Page 434
Indicates the estimated position of the vehicle. Tilt meter Displays the vehicle’s estimated degree of incline. (P.431) Toyota parking assist-sensor/slip display Displayed if an obstacle is detected while the Toyota parking assist-sensor is turned automatically in response to vehicle Automatic display mode speed.
Page 435
4-5. Using the driving support systems When the shift lever is shifted to • There is water in front of the vehicle (a river, puddle, sea water, etc.) N or D position. • Optional equipment has been When vehicle speed is reduced installed •...
Page 436
4-5. Using the driving support systems To display the screen, press the VIEW switch when the shift lever is in the P, D or N position, select the under vehicle terrain view (rear wheel) selec- tion switch. Current vehicle position Image displayed in the under vehicle terrain view (rear wheel) (image taken behind the current vehicle position) Vehicle position at the time the image was taken (behind the current...
Page 437
Tilt meter Displays the vehicle’s estimated degree of incline. (P.431) Toyota parking assist-sensor/slip display Displayed if an obstacle is detected while the Toyota parking assist-sensor is turned Selecting the display wheel) ends and the screen automati- Automatic display mode cally returns to the most recently used camera screen.
Page 438
4-5. Using the driving support systems • There is water in front of the vehicle (a WARNING river, puddle, sea water, etc.) • Optional equipment has been Guide lines installed The tire position indicator lines and • When the camera is covered or there vehicle position indicator lines may is an object in the image capture differ from actual vehicle positions...
Page 439
4-5. Using the driving support systems Screen display Display mode switching button Each time the display mode switching button is selected, the mode will change between the rear view & dual side views mode and the wide rear view & dual side views mode.
Page 440
Rear view & dual side views/wide rear view & dual side views display As the Toyota parking assist-sensor display and Rear Cross Traffic Alert display are displayed over the camera view, it may be difficult to see the Toyota parking assist-sensor display and Rear Cross Traffic Alert display depending on the color...
Page 441
4-5. Using the driving support systems dividing lines of the parking Parking space. When parking in a space which is in the reverse direction to the space described in the procedure below, the steering directions will be reversed. Shift the shift lever to the R posi- tion.
Page 442
Display mode switching button through view screen, press the VIEW switch when the shift lever is Select to change the display mode in the “P” position and the Toyota between the moving view and the see- through view. parking assist-sensor is enabled.
Page 443
N or D position with the vehicle moving approximately 20 km/h (13 mph) or less. This screen will be displayed if the Toyota parking assist-sensor detects an object in front of your vehicle (Toyota parking assist-sensor linked display). Screen display...
Page 444
For details about the Toyota parking assist-sensor (P.372) and Parking Support Brake function. (P.388) The display position of the Toyota parking assist-sensor and the position of target objects displayed in the camera image do not match. WARNING...
Page 445
4-5. Using the driving support systems Estimated course lines will be Switching the guide line mode added to the distance guide Each time the guide line switching lines. button is selected, the mode will change as follows: Automatic display mode ...
Page 446
4-5. Using the driving support systems panoramic view screen. Screen display Side Clearance View & panoramic view Distance guide lines Show distance in front of the vehicle. • Display points approximately 1 m (3 ft.) from the edge of the bumper. Vehicle width guide lines Shows guide lines of the vehicle’s width including the outside rear view mirrors.
Page 447
4-5. Using the driving support systems during automatic display mode. (P.447) Toyota parking assist-sensor When a sensor detects a stationary object, the direction of and the approximate dis- tance to the stationary object are displayed and the buzzer sounds. Parking Support Brake When the system determines that the possibility of a collision with detected target objects is high, a warning message is displayed.
Page 448
For details about the Toyota parking assist-sensor (P.372) and Parking Support Brake function. (P.388) The display position of the Toyota parking assist-sensor and the position of target objects displayed in the camera image do not match. WARNING...
Page 449
4-5. Using the driving support systems matically display Cornering View between the vehicle width guide images in the following situations: line and a target object such as the obstacle or curb of the road. When the shift lever is shifted to N or D position.
Page 450
4-5. Using the driving support systems Check the positions and distance Using the estimated course line between the inner estimated Cornering View & panoramic course line and a target object view such as the obstacle or curb of the road.
Page 451
4-5. Using the driving support systems Rear view & panoramic view Toyota parking assist-sensor When a sensor detects a stationary object, the direction of and the approximate dis- tance to the stationary object are displayed and the buzzer sounds.
Page 452
4-5. Using the driving support systems Wide rear view & panoramic view Toyota parking assist-sensor When a sensor detects a stationary object, the direction of and the approximate dis- tance to the stationary object are displayed and the buzzer sounds.
Page 453
As the Toyota parking assist-sensor display and Rear Cross Traffic Alert display are displayed over the camera view, it may be difficult to see the Toyota parking assist-sensor display and Rear Cross Traffic Alert display depending on the color and brightness of the surrounding area.
Page 454
4-5. Using the driving support systems Distance guide lines Shows the distance behind the vehicle when the steering wheel is turned. • The guide lines move in conjunction with the estimated course lines. • The guide lines display points approximately 0.5 m (1.5 ft.) (red) and approxi- mately 1 m (3 ft.) (yellow) from the center of the edge of the bumper.
Page 455
) from the edge of the bumper. : In estimated course line mode, the line will turn blue. Guide lines display The display position of the Toyota parking assist-sensor and the position of target objects displayed in the camera image do not match. Guide lines If the back door is not closed, guide lines will not be displayed.
Page 456
If the steering wheel is straight and the vehicle width guide lines and the esti- mated course lines are not in alignment, have the vehicle inspected by your Toyota dealer. Do not use the system if the display is incorrect due to an uneven (hilly) road or a non-straight (curvy) road.
Page 457
4-5. Using the driving support systems dividing lines of the parking Shift the shift lever to the R posi- tion. space. Back up until the parking assist guide line meets the edge of the dividing line of the parking space. Vehicle width guide line Once the vehicle width guide lines and the parking space...
Page 458
Magnifying the display Turn the Toyota parking assist- sensor on. Select the area on the pan- oramic view display you wish to...
Page 459
• The vehicle speed is below approxi- When the tires are replaced, the mately 12 km/h (7 mph). position indicated by the guide lines • The Toyota parking assist-sensor is displayed on the screen may differ. available. In the following situations, the magni-...
Page 460
4-5. Using the driving support systems Three-dimensional objects dis- NOTICE played in wide front view or rear Panoramic view view may not be displayed in the panoramic view. In the panoramic view, the system combines images taken from the People and other three-dimensional front, back, left and right side cam- obstacles may appear differently eras into a single image.
Page 461
4-5. Using the driving support systems collision course. Check the safety of the surroundings directly. Objects located in the shaded areas will not be displayed on the screen. The objects not displayed on the screen • Objects located in the shaded areas will not be displayed on the screen. Parts of objects which extend above a certain height cannot be dis- played on the screen.
Page 462
4-5. Using the driving support systems Area of the image captured by Area displayed on screen the camera As the images obtained from four cameras are processed and displayed Wide front view on the standard of a flat road surface; the panoramic view/moving view/see- through view/Side Clearance View/Cornering View may be dis-...
Page 463
4-5. Using the driving support systems Side view the bumper will not be dis- played. The objects not displayed on the screen Wide rear view The area displayed on the screen Rear view The area around both corners of the bumper will not be dis- played.
Page 464
4-5. Using the driving support systems tance. water droplets, snow, mud, etc.) is adhering to the camera, it cannot The camera transmit a clear image. In this case, flush it with a large quantity of water The cameras for the Multi-terrain and wipe the camera lens clean Monitor are located as shown in the with a soft and wet cloth.
Page 465
If this happens, have the Difference between the vehicle inspected by your Toyota dealer as soon as possible. screen and the actual road The distance guide lines and the...
Page 466
4-5. Using the driving support systems actual distance/course on the road. When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehicle than the actual distance. Because of this, objects will appear to be farther away than they actually are.
Page 467
WARNING Toyota parking assist-sensor pop-up display When a sensor indicator on the Toyota parking assist-sensor display illuminates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, other- wise an unexpected accident may occur.
Page 468
4-5. Using the driving support systems road. Even if the bumper of the vehicle is on the outside of the esti- mated course line in the image, in reality, the vehicles are on a colli- sion course. Visually check the surroundings and the area behind the vehicle.
Page 469
4-5. Using the driving support systems Estimated course lines Under vehicle terrain view The tire position indicator lines and Distance guide lines vehicle position indicator lines may Visually check the surroundings differ from actual vehicle positions and the area behind the vehicle. On depending on the number of pas- the screen, it appears that a truck is sengers, weight of the load, road...
Page 470
If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 471
Operate the dedicated the camera. camera cleaning washer and clean the camera lens. (P.292) The camera or surround- The image is out of align- Have the vehicle inspected ing area has received a ment by your Toyota dealer. strong impact.
Page 472
Likely cause Solution The camera position is out Have the vehicle inspected of alignment. by your Toyota dealer. The vehicle is tilted. If this happens due to (There is a heavy load The guide lines are very these causes, it does not...
Page 473
4-5. Using the driving support systems Product license...
4-5. Using the driving support systems Driving mode select switch : If equipped The driving modes can be selected to suit driving condi- tion. System components Select the driving modes on the multi-information display while turning the MODE SELECT switch left and right. ...
Page 475
4-5. Using the driving support systems comes on. omy through moderate throttle charac- • Sport mode teristics and by controlling the operation of the air conditioning system (heat- Assists acceleration response by con- ing/cooling). The “ECO” indicator trolling the transmission, engine and comes on.
4-5. Using the driving support systems • Adjust the fan speed (P.558, 570) Four-wheel drive system • Turn off Eco drive mode (P.473) Automatic deactivation of driving Use the four-wheel drive con- mode trol switch and center differen- Driving mode is deactivated and the tial lock switch to select the driving mode will be changed to normal mode in the following conditions:...
Page 477
4-5. Using the driving support systems Shift the shift lever to N. The four-wheel drive control switch Push and shift the four-wheel can be operated when drive control switch to L4. The engine switch is in ON. The shift lever is in the N position. Maintain this condition until the low speed four-wheel drive indicator turns The vehicle is stopped completely.
Page 478
Vehicles with the cruise control sys- tem: If the center differential able. Have the vehicle inspected by your lock/unlock is not completed within 5 Toyota dealer immediately. seconds while the cruise control sys- tem is on, cancel the cruise control WARNING system.
4-5. Using the driving support systems Front differential lock NOTICE system Do not push the center differential lock switch when the vehicle is turn- ing or when its wheels are spinning : If equipped freely off the ground. Use the front differential lock system only when wheel spin- ning occurs in a ditch or on a slippery or ragged surface.
Page 480
If the indicators continue to blink even if doing so, have the vehicle inspected by your Toyota dealer as soon as possible. There may be a trouble in the four-wheel drive system. Locking the front differential The following systems do not operate when the front differential is locked.
If the indicators continue to blink even if doing so, have the vehicle inspected by your Toyota dealer as soon as possible. There may be a trouble in the four-wheel drive system. Locking the rear differential The following systems do not operate when the rear differential is locked.
4-5. Using the driving support systems : When the front and rear differentials Crawl Control (with Turn are locked (if equipped) Assist function) WARNING : If equipped When using the rear differential Allows travel on extremely lock system rough off-road surfaces at a Failure to observe the following pre- cautions may result in an accident.
Page 483
4-5. Using the driving support systems Turn the MODE SELECT switch System components left or right to select a mode on the multi-information display. DAC/CRAWL switch Multi-information display (4.2- Turn Assist switch inch display model) MODE SELECT switch Multi-information display (7-inch Multi-information display display model) (P.137, 146)
Page 484
4-5. Using the driving support systems Assist function is in use) will go off and Multi-information display (4.2- a message stating that Crawl Control inch display model) has been turned off will be displayed on the multi-information display for several Multi-information display (7-inch seconds.
Page 485
4-5. Using the driving support systems trol and brake control will stop tempo- vehicle body and steering. rarily. In this event, the Crawl Control • A motor sound may be heard after the indicator will flash. vehicle comes to a stop. •...
Page 486
Turn Assist indicator will go off, system, have the vehicle inspected by your Toyota dealer. and a message stating that the Turn Assist function has been turned off will be displayed on the multi-information display for several seconds.
4-5. Using the driving support systems Multi-terrain Select Multi-terrain Select is not intended to expand the limits of the vehicle. Check the road conditions thor- : If equipped oughly beforehand, and drive safely and carefully. Multi-terrain Select is a sys- tem that improves drivability in off-road situations.
Page 488
4-5. Using the driving support systems If the brake control has activated, the slip indicator light will flash. Four-wheel drive control switch is in H4 Mode Road Conditions Suitable for the road AUTO conditions DIRT Suitable for dirt roads Select the driving modes on the multi-information display while Suitable for sandy...
Page 489
4-5. Using the driving support systems brake control, drive force control and When an inspection at your Toyota suspension control. dealer is necessary The capability to estimate the road con- In the following situations, the system ditions is limited and there is a chance may be malfunctioning.
4-5. Using the driving support systems Downhill assist control system : If equipped The downhill assist control system helps to prevent exces- sive speed on steep downhill slopes. The system will oper- ate when the vehicle is travel- Setting the speed of the ing under 30 km/h (18 mph) downhill assist control sys- and transfer mode is in H4.
Page 491
System malfunction • The brake system overheats. In the following cases, have your vehicle In the following situations, the indica- checked by your Toyota dealer. tor flashes to alert the driver, but the The downhill assist control system system will operate: indicator does not come on when the •...
4-5. Using the driving support systems DPF (Diesel Particulate WARNING Filter) system On the following surfaces, the vehicle may be unable to main- tain a constant low speed espe- : If equipped cially when the grip performance limit of the tires is exceeded or if When the deposit collected by the tires do not make sufficient the filter reaches a predeter-...
Page 493
4-5. Using the driving support systems from the exhaust pipe during NOTICE regeneration. However, this does To prevent the DPF system from not indicate a malfunction. failing Do not drive for long periods of time while “DPF full Visit your dealer” DPF deposition monitor appears on the multi-information display...
Page 494
Toyota dealer immediately. Regeneration with the DPF system switch After pressing the DPF system switch,...
Be aware, however, vehicle or an accident may occur. that these systems are supple- Have the vehicle inspected by your mentary and should not be Toyota dealer immediately. relied upon too heavily when operating the vehicle. Summary of the driving assist systems...
Page 496
4-5. Using the driving support systems VSC (Vehicle Stability Control) for each mode by selecting the drive mode using the driving mode Helps the driver to control skidding select (P.473) and multi-terrain when swerving suddenly or turning select. (P.486) on slippery road surfaces. Control can be changed to suit off- Provides cooperative control of the road driving by setting the four-...
Page 497
4-5. Using the driving support systems Automatic Rear Flashing Haz- ard Lights (if equipped) The rear side radar sensors detect following vehicles driving in the same lane. If the system deter- mines that the possibility of a rear- end collision is high, the emergency Disabling the Active TRC system flashers will flash rapidly to warn If the vehicle gets stuck in mud, dirt or...
Page 498
Active TRC is temporary deactivated. If occur when the above systems are the information continues to show, con- operating. None of these indicates tact your Toyota dealer. that a malfunction has occurred. • Vibrations may be felt through the Operating conditions of hill-start vehicle body and steering.
Page 499
4-5. Using the driving support systems speed increases. surrounding area • When your vehicle is surrounded by Operating conditions of Automatic other vehicles Rear Flashing Hazard Lights • When your vehicle is stopped to make When the following two conditions are a turn at an intersection, etc.
Page 500
4-5. Using the driving support systems Secondary Collision Brake operat- Active TRC/VSC may not oper- ing conditions ate effectively when The system operates when the SRS air- Directional control and power may not bag sensor detects a collision while the be achievable while driving on slip- vehicle is in motion.
Page 501
Collision Brake. This system is vehicle. designed to help reduce the possibil- Contact your Toyota dealer for further ity of further damage due to a second- information when replacing tires or ary collision, however, that effect wheels.
Page 502
4-5. Using the driving support systems NOTICE When the incline of the vehicle does not return even after the vehi- cle has continued to drive after being left on an inclined position such as on a curb or slope for a long time (the vehicle may remain in an inclined condition immediately after it is returned to on a level sur-...
4-6. Driving tips Off-road precautions 4-6.Driving tips WARNING Off-road vehicle precautions This vehicle belongs to the Always observe the following precau- tions to minimize the risk of death, utility vehicle class, which has serious injury or damage to your vehi- higher ground clearance and cle: narrower tread in relation to...
Page 504
4-6. Driving tips cautions to ensure your driving After driving through tall grass, enjoyment and to help prevent the mud, rock, sand, rivers, etc., check that there is no grass, bush, paper, closure of areas to off-road vehi- rags, stone, sand, etc. adhering or cles: trapped on the underbody.
4-6. Driving tips Winter driving tips NOTICE Inspection after off-road driving Carry out the necessary prepa- Sand and mud that has accumu- lated in brake drums and around rations and inspections before brake discs may affect braking effi- driving the vehicle in winter. ciency and may damage brake sys- Always drive the vehicle in a tem components.
Page 506
Observe the following precautions to reduce the risk of accidents. Request repairs or replacement of Failure to do so may result in a loss of snow tires from your Toyota dealer or vehicle control and cause death or legitimate tire retailers. serious injury.
Page 507
P, there may be a prob- Regulations regarding the use of lem with the shift lock system. Have tire chains vary depending on loca- the vehicle inspected by your Toyota dealer immediately. tion and type of road. Always check...
4-6. Driving tips local regulations before installing Eco-friendly driving tips chains. For improved fuel economy Tire chain installation and reduced CO emissions, Observe the following precautions when pay attention to the following installing and removing chains: points: Install and remove tire chains in a safe location.
Page 509
4-6. Driving tips tioning system and reduce fuel con- When braking sumption as well. Observe conditions in front of and In winter: Turn the A/C switch on around the vehicle, and estimate only when both heating and dehu- your stopping position. Release the midifying are needed, and if only accelerator pedal early and con- heating is needed, turn the A/C...
Page 510
4-6. Driving tips large roof rack will also cause poor fuel economy. Regular maintenance Make sure to check the tire infla- tion pressure frequently. Improper tire inflation pressure can cause poor fuel economy. Also, as snow tires can cause large amounts of friction, their use on dry roads can lead to poor fuel economy.
Audio system 5-1. Basic Operations ® 5-9. Bluetooth Phone Audio system types ..512 Making a phone call..550 Using the steering wheel audio When receiving a phone call switches......513 ........551 AUX port/USB port ...514 Speaking on the phone..551 5-2. Using the audio system ®...
5-1. Basic Operations 5-1.Basic Operations Audio system types : If equipped Overview Vehicles with navigation system or multimedia system Refer to the “Navigation and Multimedia System Owner’s Manual”. Vehicles without navigation system or multimedia system CD player with AM/FM radio Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating.
5-1. Basic Operations Using the steering wheel To cancel the mute or pause, press and hold the switch again. audio switches Select switch Radio mode: Some audio features can be • Press: Select a radio station saved in controlled using the switches preset stations on the steering wheel.
5-1. Basic Operations player if it is not turned on. AUX port/USB port AUX port : If equipped The AUX port only supports audio input. Connect an iPod, USB memory device or portable audio player WARNING to the AUX port/USB port as While driving indicated below.
5-2. Using the audio system Optimal use of the audio • “Bluetooth” 5-2.Using the audio system P.540 system • “PHONE” P.543 : If equipped The sound quality, volume bal- Using the audio control ance and ASL settings can be function adjusted.
Page 517
5-2. Using the audio system Press the “SETUP ENTER” button or (BACK) to return to the sound set- ting menu. Adjusting the Automatic Sound Levelizer (ASL) When ASL is selected, press the “TUNE >” or “< SELECT” button to change the amount of ASL. “LOW”, “MID”, “HIGH”, or “OFF”...
5-3. Using the radio 5-3.Using the radio Radio operation : If equipped Press the “MODE” button until “AM” or “FM” is displayed. Control panel POWER VOLUME AM/FM mode button Adjusting the frequency Seeking the frequency Station selectors Setting station presets Reception sensitivity Maintaining perfect radio reception at Search for the desired stations...
5-4. Playing an audio CD and MP3/WMA/AAC discs 5-4.Playing an audio CD and MP3/WMA/AAC discs CD player operation : If equipped Insert a disc or press the “MODE” button (CD is already loaded) to begin listening to a CD. Control panel Disc eject POWER VOLUME...
Page 520
5-4. Playing an audio CD and MP3/WMA/AAC discs Repeat play Loading a CD or MP3/WMA/AAC disc Press (RPT). Insert a disc. To cancel, press (RPT) again. Switching the display Ejecting a CD or Press (TEXT) to display or hide MP3/WMA/AAC disc the CD title.
Page 521
5-4. Playing an audio CD and MP3/WMA/AAC discs Selecting a file rectified, take the vehicle to your Toyota dealer. Press the “SEEK >” or “< TRACK” Cause/Correction button to move up or down to select Message procedures the desired file.
Page 522
5-4. Playing an audio CD and MP3/WMA/AAC discs VBR) MPEG1 LAYER3: 32320 (kbps) MPEG2 LSF LAYER3: 8160 (kbps) CDs with copy-protect features may not • Compatible channel modes: stereo, play correctly. joint stereo, dual channel and monau- CD player protection feature WMA file compatibility To protect the internal components, •...
Page 523
5-4. Playing an audio CD and MP3/WMA/AAC discs Joliet) MP3, WMA and AAC playback UDF (2.01 or lower) When a disc containing MP3, WMA or MP3, WMA and AAC files written in any AAC files is inserted, all files on the disc format other than those listed above are first checked.
Page 524
5-4. Playing an audio CD and MP3/WMA/AAC discs This product is protected by certain Discs with a transparent or translu- intellectual property rights of cent recording area Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
5-5. Using an external device 5-5.Using an external device Listening to an iPod : If equipped Connecting an iPod enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “iPod” is displayed. Connecting an iPod P.514 Control panel POWER VOLUME...
Page 526
5-5. Using an external device Displaying text message “Artists” “Albums” “Songs” Selecting a play mode “Genres” “Composers” “Radio” “Audiobooks” Press (BROWSE) to select “Podcasts” “iTunes U” iPod play mode. Press the “SETUP ENTER” but- Pressing the “TUNE >”...
Page 527
5-5. Using an external device hide the album title. Selecting a song from the song list If there are continuing texts, is dis- played. Press (LIST). Press and hold (TEXT) until you The song list will be displayed. hear a beep to display the remaining Press the “TUNE >”...
Page 528
If an error message is displayed, refer to version. the following table and take the appro- Compatible models priate measures. If the problem is not rectified, take the vehicle to your Toyota The following devices can be used with dealer. this system. Made for...
Page 529
5-5. Using an external device WARNING While driving Do not connect iPod or operate the controls. Doing so may cause an acci- dent, resulting in death or serious injury. NOTICE To prevent damage to iPod Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in dam- age to the iPod.
5-5. Using an external device Listening to USB memory device : If equipped Connecting a USB memory enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “USB” is dis- played. Connecting a USB memory P.514 Control panel POWER VOLUME...
Page 531
5-5. Using an external device Displaying folder list Displaying text message Folder randomAll folder ran- Using a USB memory domOff Selecting folders one at a time Repeat play Press (<FOLDER) or Pressing (RPT) changes (FOLDER>) to select the desired modes in the following order: File folder.
Page 532
5-5. Using an external device priate measures. If the problem is not USB memory that can be used for MP3, rectified, take the vehicle to your Toyota WMA and AAC playback dealer. Compatible device formats Cause/Correction The following device formats can be...
Page 533
5-5. Using an external device MP3 file compatibility WMA tags can be added to WMA files, • Compatible standards making it possible to record the track MP3 (MPEG1 LAYER3, MPEG2 LSF title, artist, and album name in the same LAYER3) way as with ID3 tags.
5-5. Using an external device Microsoft Corporation in the U.S.A. Using the AUX port and other countries. This product is protected by certain intellectual property rights of : If equipped Microsoft. Use or distribution of such This port can be used to con- technology outside of this product is prohibited without a license from nect a portable audio device...
® 5-6. Using Bluetooth devices ® 5-6.Using Bluetooth devices ® Bluetooth audio/phone Device registration/connec- tion flow : If equipped ® Register the Bluetooth device The following can be per- to be used with audio system ® formed using Bluetooth wire- (P.538) less communication: ®...
Page 536
® 5-6. Using Bluetooth devices “TUNE >” or “< SELECT” button Microphone Selects items such as menu and num- Function button On-hook button Turns the hands-free system off/ends a call/refuses a call Off-hook button Turns the hands-free system on/starts a call ®...
Page 537
® 5-6. Using Bluetooth devices “Bluetooth” menu First menu Second menu Third menu Operation details Registering a ® “Pairing” Bluetooth device (P.538) Listing the regis- “List phone” tered cellular phones (P.540) Listing the regis- “List audio” tered portable play- ers (P.540) Changing the pass- “Passkey”...
Page 538
® 5-6. Using Bluetooth devices “PHONE” menu First menu Second menu Third menu Operation details Setting automatic “Auto transfer On” contact/history transfer on or off “Auto transfer Off” (P.543) Adding a new num- “Add contacts” ber (P.543) Deleting a contact stored in the phone- “Delete contacts”...
® 5-6. Using Bluetooth devices Using the steering wheel ® Register a Bluetooth switches device The steering wheel switches ® Before using the Bluetooth can be used to operate a con- audio/phone, it is necessary to nected cellular phone, or por- ®...
Page 540
® 5-6. Using Bluetooth devices functions, both functions will be registered at the same time. When deleting the device, both functions will be deleted at the same time. If the off-hook button is pressed and the “PHONE” mode is entered when no phones have been regis- tered, the registration screen will be automatically displayed.
5-7. “SETUP” menu Using the “SETUP” menu button, and press the “SETUP 5-7.“SETUP” menu ENTER” button. (“Bluetooth” menu) Select “Select” using the “TUNE >” or “< SELECT” button, and : If equipped press the “SETUP ENTER” but- ® Registering a Bluetooth ton.
Page 542
5-7. “SETUP” menu >” or “< SELECT” button, and press Select “Disconnect” using the the “SETUP ENTER” button. The “TUNE >” or “< SELECT” button, list of registered portable players and press the “SETUP ENTER” will be displayed. button. Connecting the registered porta- Press (YES).
Page 543
5-7. “SETUP” menu play setting OFF” using the “TUNE Setting automatic connec- >” or “< SELECT” button, and press tion of the device on or off the “SETUP ENTER” button. If “BT power” is set to on, the regis- tered device will be connected Initialization automatically when the engine Select “Initialize”...
5-7. “SETUP” menu Using the “SETUP” menu Select “Add contacts” using the “TUNE >” or “< SELECT” button, (“PHONE” menu) and press the “SETUP ENTER” button. : If equipped Transferring all contacts from the To enter the set up menu, cellular phone press the “SETUP ENTER”...
Page 545
5-7. “SETUP” menu press (YES). Deleting call histories Press (A-Z) to display the regis- Select “Phonebook” using the tered names in alphabetical order “TUNE >” or “< SELECT” button, of the initial. and press the “SETUP ENTER” button. Changing the sorting order Select “Delete call history”...
Page 546
5-7. “SETUP” menu Deleting missed call history Registering the contacts from the “SETUP” mode Select “Missed calls” using the “TUNE >” or “< SELECT” button, Press the “TUNE >” or “< and press the “SETUP ENTER” SELECT” button, and press the button.
Page 547
5-7. “SETUP” menu Press (ADD FAVORITE). (ALL). When 15 contacts have already Select (YES) when the con- been registered to the favorites firmation screen appears. list, a registered contact needs to Deleting the contacts from the be replaced. “PHONE” mode Select the contact to be Press the off-hook button.
Page 548
5-7. “SETUP” menu Call history Setting ring tone volume Up to 10 numbers can be stored in each of the outgoing, incoming and missed Select “HF sound setting” using call history memories. the “TUNE >” or “< SELECT” Limitation of number of digits button, and press the “SETUP A phone number that exceeds 24 digits ENTER”...
® 5-8. Bluetooth Audio ® 5-8.Bluetooth Audio ® Operating a Bluetooth enabled portable player : If equipped Control panel POWER VOLUME Changing the audio source/playback Selecting an item Displaying list of the current folder Selecting a track, fast-forwarding or rewinding Random play or back button Repeat play Selecting an album...
Page 550
® 5-8. Bluetooth Audio To return to the previous display, press Selecting a track (BACK). Press the “SEEK >” or “< TRACK” button to move up or down. Switching the display Press (TEXT) to display or hide Fast-forwarding and rewind- the album title.
® 5-9. Bluetooth Phone Enter the phone number and ® 5-9.Bluetooth Phone Making a phone call press the off-hook button. : If equipped Dialing from call histories To enter the “PHONE” mode, press the off-hook button. Select “All calls”, “Missed calls”, “Incoming calls”...
® 5-9. Bluetooth Phone When receiving a phone Speaking on the phone call : If equipped : If equipped Transferring a call Answering the phone A call can be transferred between the cellular phone and system while Press the off-hook button. dialing, receiving a call, or during a call.
Page 553
® 5-9. Bluetooth Phone Press (SEND) to send Setting call volume tones. To decrease the volume: Press the Pressing (BACK) preserves the “VOL-” button. number and returns to the previous To increase the volume: Press the screen. “VOL+” button. Pressing (EXIT) deletes the num- ber and go to “Entering a number”...
® 5-10. Bluetooth ® About Bluetooth ® 5-10.Bluetooth ® Bluetooth Bluetooth is a registered trademark of Bluetooth SIG, Inc. Overview ® When using the Bluetooth audio/phone In the following situations, the system may not function. • The portable player does not support ®...
Page 555
® 5-10. Bluetooth ® Bluetooth specifications: Ver. ® Before using Bluetooth devices, 2.0 or higher (Recommended: users of any electrical medical device other than implantable car- Ver. 4.1 +EDR or higher) diac pacemakers, cardiac resyn- Profiles: chronization therapy-pacemakers or implantable cardioverter defi- •...
6-2. Using the interior lights Interior lights list....589 6-3. Using the storage features List of storage features ..593 Luggage compartment features ......598 6-4. Using the other interior fea- tures Toyota multi-operation touch (vehicle with the 12.3-inch display) ......602 Other interior features..605...
6-1. Using the air conditioning system and defogger Front automatic air conditioning system (vehicles 6-1.Using the air conditioning system and defogger without 12.3-inch display) Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls ...
Page 558
6-1. Using the air conditioning system and defogger Heated Windshield Defroster switch (if equipped) “REAR” switch (if equipped) (P.578) Heated steering wheel (if equipped) (P.584) Eco air conditioning mode switch Front seat concentrated airflow mode (S-FLOW) switch Outside/recirculated air mode switch Rear window and outside rear view mirror defoggers switch (if equipped) Windshield defogger switch...
Page 559
6-1. Using the air conditioning system and defogger Fan speed control switch “REAR” switch Right-hand side airflow mode control switch Right-hand side temperature control switch Windshield wiper de-icer switch (if equipped) Heated Windshield Defroster switch (if equipped) “SYNC” switch Eco air conditioning mode switch “A/C”...
Page 560
6-1. Using the air conditioning system and defogger tized such as reducing fan speed, etc. Press the eco air conditioning mode switch. When the eco air conditioning mode is on, the indicator illuminates on the eco air conditioning mode switch. Defogging the windshield Defoggers are used to defog the windshield and front side windows.
Page 561
6-1. Using the air conditioning system and defogger view mirror defoggers switch is on, the tion controlled to restrict heating/cool- ing capacity indicator illuminates on the rear window • Fan speed restricted when automatic and outside rear view mirror defoggers mode is selected switch.
Page 562
6-1. Using the air conditioning system and defogger : According to temperature and humid- ambient temperature air will stop. To prevent the air conditioning system from ity conditions, fan speed and direc- turning off, press the Stop & Start cancel tion of the air flow, the nanoe™...
Page 563
Adjusting the temperature Do not disassemble or repair the gen- and airflow for driver and erator because it contains high volt- age parts. Contact your Toyota dealer passenger seats simultane- if the generator needs repair. ously (“SYNC” mode) To turn on the “SYNC” mode, press NOTICE the “SYNC”...
Page 564
6-1. Using the air conditioning system and defogger Change the airflow mode Using front seat concen- P.558 trated airflow mode (S- FLOW) Windshield wiper de-icer (if Directing airflow to the front seats equipped)/Heated Wind- only and to all seats can be shield Defroster (if switched via switch operation.
Page 565
6-1. Using the air conditioning system and defogger Vehicles without rear air condi- Left-hand drive vehicles tioning system Right-hand drive vehicles WARNING To prevent burns Vehicles with windshield wiper de- icer: Do not touch the glass at lower part of the windshield or to the side of the front pillars when the wind- shield wiper de-icer is on.
Page 566
6-1. Using the air conditioning system and defogger Adjusting the air flow direction and opening/closing the air outlets Front Turns the power heater on/off If you do not turn the switch to off, the engine speed is increased whenever the engine is started.
Page 567
6-1. Using the air conditioning system and defogger WARNING To not interrupt the windshield defogger from operating Do not place anything on the instru- ment panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.
The air conditioning system can be operated using the air condi- tioning control panel and air conditioning control screen on the Toyota multi-operation touch. For details about Toyota multi-operation touch, refer to P.602. Air conditioning controls Vehicles with rear air conditioning system...
Page 569
6-1. Using the air conditioning system and defogger Left-hand side temperature control switches Left-hand side airflow mode control switch Fan speed control switches Right-hand side airflow mode control switch “Option” switch Right-hand side temperature control switches Outside/recirculated air mode switch Rear air conditioning control screen Eco air conditioning mode switch “SYNC”...
Page 570
6-1. Using the air conditioning system and defogger Windshield wiper de-icer switch (if equipped) Heated Windshield Defroster switch (if equipped) Vehicles without rear air conditioning system Left-hand side temperature control switches Fan speed control switches Airflow mode control switch “Option”...
Page 571
6-1. Using the air conditioning system and defogger “Rear” switch (if equipped) (P.578) Adjusting the temperature set- conditioning control screen to ting decrease the fan speed. Operate the temperature control The fan speed is shown on the display. (7 levels) switches on the air conditioning control panel upwards or select Press the “OFF”...
Page 572
6-1. Using the air conditioning system and defogger When the function is on, the indicator Press the rear window and outside illuminates on the “A/C” switch. rear view mirror defoggers switch. Eco air conditioning mode The defoggers will automatically turn off after 15 minutes.
Page 573
6-1. Using the air conditioning system and defogger tion. To improve air conditioning perfor- mance, perform the following opera- tions: Fogging up of the windows • Adjust the fan speed The windows will easily fog up when • Turn off Eco drive mode (P.473) the humidity in the vehicle is high.
Page 574
6-1. Using the air conditioning system and defogger Ventilation and air conditioning When the windshield is fogged up odors and the engine is stopped due to the Stop & Start system (vehicles To let fresh air in, set the air condition- with Stop &...
Page 575
Do not disassemble or repair the gen- sunlight. erator because it contains high volt- age parts. Contact your Toyota dealer if the generator needs repair. Adjusting the temperature and airflow for driver and...
Page 576
6-1. Using the air conditioning system and defogger Defroster: Using front seat concen- The Heated Windshield trated airflow mode (S- Defroster will automatically turn FLOW) off. Directing airflow to the front seats The Heated Windshield only and to all seats can be Defroster will not operate if the switched via switch operation.
Page 577
6-1. Using the air conditioning system and defogger Press the switch again to return the WARNING engine to the normal idle speed. If you Vehicles with Heated Windshield do not turn the switch to off, the engine Defroster: Do not touch the wind- speed is increased whenever the shield (especially the lower part) as engine is started.
Page 578
6-1. Using the air conditioning system and defogger Adjusting the air flow direction WARNING and opening/closing the air To not interrupt the windshield outlets defogger from operating Front Do not place anything on the instru- ment panel which may cover the air outlets.
6-1. Using the air conditioning system and defogger Rear cooler system : If equipped Press the “REAR” switch on the front air conditioning control panel to use the rear cooler system. Rear cooler controls Vehicles without 12.3-inch display Vehicles with 12.3-inch display “REAR”...
Page 580
6-1. Using the air conditioning system and defogger Adjusting the fan speed set- ting Press the “REAR” switch to turn on the system. Use the fan speed control knob to adjust the desired fan speed. Press the “REAR” switch again or set the fan speed control knob to “OFF”...
6-1. Using the air conditioning system and defogger Rear air conditioning system : If equipped Air outlets and fan speed are automatically adjusted according to the temperature setting. Rear air conditioning controls Air conditioning control panel Left-hand side temperature control switch Automatic mode switch Fan speed control switch Airflow mode control switch...
Page 582
6-1. Using the air conditioning system and defogger Air conditioning control screen (vehicles with 12.3-inch display) Fan speed control switches Airflow mode control switch Right-hand side temperature control switch “OFF” switch “Rr AUTO” switch (automatic mode) Left-hand side temperature control switch Adjusting the temperature set- control screen to decrease the tem- ting...
Page 583
6-1. Using the air conditioning system and defogger conditioning control screen to may be delayed for a short period of time immediately after the air condi- decrease the fan speed. tioning system is started in automatic mode. The fan speed is shown on the display. (7 levels) NOTICE Press the “OFF”...
6-1. Using the air conditioning system and defogger Adjusting the air flow direction Heated steering and opening/closing the air wheel /seat heat- outlets (side ceiling) /seat ventilators : If equipped Heated steering wheel Warm up the side grips of the steering wheel ...
Page 585
If the indicator light still flashes, a malfunction may be occurring. Turn the heated steering wheel off and have the vehicle inspected by your Toyota dealer. Vehicles without 12.3-inch dis- Seat heaters (if equipped) play (type B)
Page 586
6-1. Using the air conditioning system and defogger When in the AUTO mode, the seat heaters or seat ventilators automati- cally operate according to circum- stances. Rear (outboard rear seats) (if equipped) Turns the seat heaters on/off Each time the switch is pressed, the ...
Page 587
6-1. Using the air conditioning system and defogger indicator illuminates during opera- tion. When in the AUTO mode, the seat heaters or seat ventilators automati- cally operate according to circum- stances. The seat heaters can be used when The engine switch is in ON. Customization Settings for the seat heaters can be changed.
Page 588
Control screen (vehicle with ating, the indicator on the seat ven- 12.3-inch display) tilator switch and level indicator When is selected on the Toyota illuminate, or the indicator on the multi-operation touch screen, seat ventilator switch, level indicator heated steering wheel, front seat and “AUTO”...
Page 589
6-1. Using the air conditioning system and defogger heaters or seat ventilators automati- cally operate according to circum- stances. Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is operating. Windshield wiper de-icer switch (if equipped) (P.575) Operation condition display of Heated Windshield Defroster...
6-2. Using the interior lights Interior lights list 6-2.Using the interior lights Location of the interior lights Shift lever lights Front interior lights /front personal lights (P.590) Rear interior lights /rear personal lights (P.590) Rear personal lights (P.590) Inside door handle lights Footwell lights Scuff lights Engine switch light...
Page 591
6-2. Using the interior lights Rear interior lights (if Operating interior lights equipped) Front interior lights (if equipped) Turning the door position on Turns the light off Turns the door-linked function on (door position) Turns the door-linked function The lights turn on/off according to the on (door position) opening/closing of the doors.
Page 592
6-2. Using the interior lights Rear personal lights Third seats (type B) Second seats (if equipped) Turns the lights on/off When the rear personal lights illuminate linked with the interior lights operation or when they illuminate with the door- linked function on (door position), they will not turn off even if the switch is pressed.
Page 593
6-2. Using the interior lights whether the doors are locked/unlocked, and whether the doors are opened/closed. To prevent the battery from being discharged If the interior lights remain on when the engine switch is turned to OFF, the lights will go off automatically after 20 minutes.
6-3. Using the storage features List of storage features 6-3.Using the storage features Location of the storage features Overhead console (if equipped) (P.595) Glove box (P.594) Bottle holders (P.596) Door pockets Auxiliary boxes (if equipped) (P.597) Cup holders (P.595) Console box (if equipped) (P.594)/cool box (if equipped) (P.605) Open tray (if equipped) (P.598)/wireless charger (if equipped) (P.610) Card holders (if equipped) (P.597)
Page 595
6-3. Using the storage features WARNING Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: Glasses may be deformed by heat WARNING or cracked if they come into contact with other stored items.
Page 596
6-3. Using the storage features Tray in the console box The tray in the console box can be moved left or right, or can be removed. WARNING Items unsuitable for storing Console box insert Do not store items heavier than 0.2 kg The insert in the console box can be (0.4 lb.).
Page 597
6-3. Using the storage features Do not place anything tall such as plastic bottle in the cup holder with the tray. It may prevent the shift operation. NOTICE To prevent damage to the cup holders (vehicles with a rear cup holder) Stow the cup holders before stowing Front cup holder...
Page 598
6-3. Using the storage features Side of the third seat Instrument panel (if equipped) Bottle holders Auxiliary boxes When storing a bottle, close the cap. Front (if equipped) The bottle may not be stored depend- ing on its size or shape. NOTICE Items that should be not stowed in the bottle holders...
6-3. Using the storage features Luggage compartment WARNING features Caution while driving Do not leave the auxiliary box open while driving. WARNING Items stored in it may fall out and Caution while driving cause death or serious injury in case of an accident or sudden stop.
Page 600
6-3. Using the storage features WARNING When cargo hooks are not in use To avoid injury, always return the hooks to their stowed positions when not in use. Storage compartment Side of the luggage compart- ment (if equipped) Remove the cover. Warning reflector holder Open the deck board.
Page 601
6-3. Using the storage features 5-passenger models able to store it. Luggage cover (if equipped) Installing the luggage cover Install one side of the luggage cover to the holder. While push- ing that side in, install the other side to the opposite holder. Pull out the luggage cover and ...
Page 602
6-3. Using the storage features Removing the luggage cover WARNING Detach the both ends of the lug- Luggage cover gage cover from the holder and Do not allow children to climb on the retract it. luggage cover. Climbing on the lug- gage cover could result in damage to the luggage cover, possibly causing death or serious injury to the child.
(P.587) The following functions can be dis- Select to display the audio con- played and operated on the Toyota trol screen. multi-operation touch. Select to display the fuel con- Operate each switch to change the dis- sumption screen.
Page 604
6-4. Using the other interior features position of the screens on the sumption screen or off-road driving Toyota multi-operation touch. information display screen will dis- play that screen in full screen. The screen position can also be changed by perform a left or right flick...
Page 605
6-4. Using the other interior features Multi-terrain Select mode display Transfer mode display When the Multi-terrain Select is turned off Brake pedal display Displays the amount of depression of the brake pedal. Front tire direction display Displays the estimated direction of the front tires. Active TRC operation display The tires with Active TRC operating are shown in orange.
6-4. Using the other interior features Other interior features Toyota multi-operation touch settings Cool box (if equipped) Settings of the split-screen can be changed. While the engine is running, the cool box, which is cooled by the air With the off-road driving information conditioning, can be used.
Page 607
6-4. Using the other interior features Qatar, Kuwait the air conditioning system. • To adjust the temperature of the cool box, the cool box may stop operating temporarily. : Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar, Kuwait When the outside temperature is 0°C (32°F) or below The cool box may not operate.
Page 608
6-4. Using the other interior features WARNING When opening and closing the cool box Take care to prevent your fingers etc. from being caught. NOTICE To prevent battery discharge Do not leave the cool box on longer Automatic light off to prevent bat- than necessary when the engine is tery discharge not running.
Page 609
6-4. Using the other interior features Luggage compartment (if equipped) Open the lid. 220 V AC (if equipped) Accessories that use less than 100 Open the lid. Rear side of the console box Open the lid. The power outlet can be used when ...
Page 610
6-4. Using the other interior features designed for data transfer or other NOTICE purposes. When power outlet is not in use Depending on the external device, To avoid damaging the power outlet, it may not charge properly. Refer to close the power outlet lid when the the manual included with the device power outlet is not in use.
Page 611
6-4. Using the other interior features Do not apply excessive force to or impact the USB Type-C charging ports. Do not disassemble or modify the USB Type-C charging ports. To prevent damage to external devices Do not leave external devices in the vehicle.
Page 612
6-4. Using the other interior features If 2 or more portable devices are placed on the charging tray, their charging coils may not be properly detected and they may not be Name for all parts charged. Approximately 6 cm (2.4 in.) Approximately 7 cm (2.8 in.) Using the wireless charger Press the power supply switch...
Page 613
6-4. Using the other interior features tion indicator light (green) comes on. Lighting conditions of opera- tion indicator light Operation indicator Conditions light When the Wireless char- Turning off ger power supply is off On Standby (charging possible state) Green Recharging function (comes on) When charging is com-...
Page 614
6-4. Using the other interior features When an error occurs, the opera- Suspected causes Handling method tion indicator light flashes an A metallic foreign orange color. substance is in the Handle the error based on the fol- charge area, and Remove the for- lowing tables.
Page 615
6-4. Using the other interior features Usable portable devices be performed while switching frequen- cies. Qi standard wireless charge standard can be used on compatible devices. Important points of the wireless However, not all Qi standard devices charger and compatibility are guaranteed. If the electronic key cannot be Starting with mobile phones and detected within the vehicle interior,...
Page 616
6-4. Using the other interior features WARNING NOTICE Caution regarding interference Situations in which the function with electronic devices may not operate normally People with implantable cardiac pace- Devices may not be charged normally makers, cardiac resynchronization in the following situations. therapy-pacemakers or implantable The portable device is fully charged cardioverters, as well as any other...
Page 617
Fold down the armrest for use. for any other reason, the wireless charger may be malfunctioning. Con- tact your Toyota dealer. To prevent malfunctions and data corruptions When charging, bringing a credit, or other magnetic card, or magnetic...
Page 618
6-4. Using the other interior features can be used when getting in or out Coat hooks of the vehicle and others. The coat hooks are provided with the second seat assist grips. WARNING Assist grips (type A) WARNING Do not use the assist grip when get- ting in or out of the vehicle or rising Items that must not be hanged from your seat.
Page 619
6-4. Using the other interior features...
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ....620 Cleaning and protecting the vehicle interior ....623 7-2. Maintenance Maintenance requirements626 Scheduled maintenance ...628 7-3. Do-it-yourself maintenance Do-it-yourself service precau- tions ........638 Hood .........640 Engine compartment ..641 Draining the fuel filter water (diesel engine only)
7-1. Maintenance and care Cleaning and protecting Rear spoiler may not be washable in 7-1.Maintenance and care some automatic car washes. There the vehicle exterior may also be an increased risk of dam- age to vehicle. High pressure car washes Perform the following to pro- As water may enter the cabin, do not tect the vehicle and maintain it...
Page 622
7-1. Maintenance and care Note for a smart entry & start sys- When cleaning the windshield (vehicles with rain-sensing wind- If the door handle becomes wet while shield wipers) the electronic key is within the effective Set the wiper switch to off. range, the door may lock and unlock If the wiper switch is in “AUTO”, the repeatedly.
Page 623
• After driving near the sea coast device to not operate normally. • After driving on salted roads Vehicles with Toyota Safety Sense: • If coal tar or tree sap is present on Do not spray water directly on the...
7-1. Maintenance and care Cleaning and protecting NOTICE the vehicle interior Do not spray the lower part of the windshield continuously. If water enters the air conditioning system Perform cleaning in a manner intake located near the lower part of appropriate to each compo- the windshield, the air conditioning system may not operate correctly.
Page 625
Water may also cause the injury. body to rust. When cleaning the inside of the windshield (vehicles with Toyota NOTICE Safety Sense) Cleaning detergents Do not allow glass cleaner to contact Do not use the following types of the lens.
Page 626
Caring for leather areas allel to the heater wires or antenna. Toyota recommends cleaning the inte- rior of the vehicle at least twice a year to Be careful not to scratch or damage maintain the quality of the vehicle’s inte- the heater wires or antenna.
Doesn’t that seem like the best mends the following mainte- way? nance: Your Toyota dealer has invested a lot of money in special Toyota tools and ser- WARNING vice equipment. It helps them to do the If your vehicle is not properly job better and at less cost.
Page 628
(P.129, 133) Engine continually runs hot, oil pres- sure gauge stays low If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. Your vehicle may need adjustment or repair.
7-2. Maintenance Scheduled maintenance Perform maintenance by the schedule as follows: Maintenance schedule requirements Your vehicle needs to be serviced according to the normal maintenance schedule. (See “Maintenance schedule”.) If you mainly operate your vehicle under one or more of the special operating condi- tions below, some of the maintenance schedule items need to be serviced more fre- quently in order to keep your vehicle in good condition.
Page 630
7-2. Maintenance SERVICE INTER- ODOMETER READING VAL: MONTHS (Odometer reading or x1000 km 10 20 30 40 50 60 70 80 months, whichever x1000 miles 6 12 18 24 30 36 42 48 comes first.) BASIC ENGINE COMPONENTS Gasoline engine Inspect at first 100000 km (60000 miles) or 72 Drive months, after 100000 km (60000 miles)
Page 631
7-2. Maintenance SERVICE INTER- ODOMETER READING VAL: MONTHS (Odometer reading or x1000 km 10 20 30 40 50 60 70 80 months, whichever x1000 miles 6 12 18 24 30 36 42 48 comes first.) 10 Battery FUEL AND EMISSION CONTROL SYSTEMS Fuel filter (gasoline engine) <<See note 7.>>...
Page 632
7-2. Maintenance SERVICE INTER- ODOMETER READING VAL: MONTHS (Odometer reading or x1000 km 10 20 30 40 50 60 70 80 months, whichever x1000 miles 6 12 18 24 30 36 42 48 comes first.) Charcoal canister (gasoline engine) CHASSIS AND BODY Brake pedal and parking brake <<See note 11.>>...
Page 633
7-2. Maintenance SERVICE INTER- ODOMETER READING VAL: MONTHS (Odometer reading or x1000 km 10 20 30 40 50 60 70 80 months, whichever x1000 miles 6 12 18 24 30 36 42 48 comes first.) 37 Front and rear suspensions 38 Tires and inflation pressure Lights, horn, wipers and wash- 40 Air conditioning filter...
Page 634
Bahrain, Qatar, Kuwait, the United Arab Emirates, Yemen, Saudi Arabia, Bangladesh, Oman, Pakistan, Mongolia, Vanuatu, and Micronesia only. 10. Toyota genuine fuel injector cleaner or equivalent. 11. Parking brake inspection is not necessary. 12. Lubricate within 24 hours after submerging.
Page 635
7-2. Maintenance A-1: Operating on rough or muddy roads, or roads with melted snow. Lubrication of propeller shafts <<See Every 5000 km (3000 miles) or 3 months notes 1 and 2.>> Tightening of propeller shaft bolts Every 5000 km (3000 miles) or 3 months Every 5000 km (3000 miles) or 3 months Inspection of propeller shaft boots...
Page 636
7-2. Maintenance A-2: Operating on dusty roads. (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.) Lubrication of propeller shafts <<See Every 5000 km (3000 miles) or 3 months notes 1 and 2.>>...
Page 637
7-2. Maintenance B-1: Heavily loaded vehicle. (Example: Towing a trailer (with towing hitch), using a camper, using a car top carrier, etc.) I: Every 40000 km (24000 miles) or 24 months Inspection or replacement of automatic transmission fluid R: Every 80000 km (48000 miles) or 48 months Every 40000 km (24000 miles) or 48 Replacement of transfer oil...
Page 638
7-2. Maintenance B-3: Extensive idling and/or low speed driving for a long distance such as police, professional/private use like taxi or door-to-door delivery use. Every 5000 km (3000 miles) or 3 months Inspection of brake pads and discs I: Every 40000 km (24000 miles) or 24 months Inspection or replacement of automatic...
Electric winch • Grease (if equipped) • Automatic transmis- Engine radia- (P.661) sion fluid tor, condenser and inter- • “Toyota Super Long cooler radiator Life Coolant” or a (if equipped) similar high quality (P.649) ethylene glycol- based non-silicate, Tire inflation •...
Page 640
7-3. Do-it-yourself maintenance When working on or under the WARNING vehicle The engine compartment contains Do not get under the vehicle with just many mechanisms and fluids that the jack supporting it. Always use may move suddenly, become hot, or automotive jack stands or other solid become electrically energized.
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Opening the hood Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. WARNING Pre-driving check Check that the hood is fully closed...
7-3. Do-it-yourself maintenance Engine compartment Components 1GR-FE engine Fuse box (P.681) Battery (P.649) Engine oil level dipstick (P.645) Radiator cooling fan (P.649) Engine oil filler cap (P.646) Washer fluid tank (P.652) Engine coolant reservoir (P.648) Engine radiator (P.649) Electric cooling fan (if equipped) Condenser (P.649) Air cleaner (P.653)
Page 643
7-3. Do-it-yourself maintenance V35A-FTS engine Fuse box (P.681) Battery (P.649) Intercooler coolant reservoir (P.648) Engine coolant reservoir (P.648) Engine oil filler cap (P.646) Radiator cooling fan (P.649) Engine oil level dipstick (P.645) Air cleaner (P.653) Washer fluid tank (P.652) Intercooler radiator (P.649) Engine radiator (P.649) Electric cooling fan (if equipped)
Page 644
7-3. Do-it-yourself maintenance F33A-FTV engine Fuse box (P.681) Battery (P.649) Intercooler coolant reservoir (P.648) Engine coolant reservoir (P.648) Radiator cooling fan (P.649) Engine oil filler cap (P.646) Engine oil level dipstick (P.645) Air cleaner (P.653) Washer fluid tank (P.652) Intercooler radiator (P.649) Engine radiator (P.649) Electric cooling fan (if equipped)
Page 645
7-3. Do-it-yourself maintenance WARNING When the engine is hot (F33A-FTV engine) Do not touch the engine cover as it become very hot and cause serious injuries, such as burns. Install the cover shown in the Engine compartment cover illustration. (if equipped) Keep the engine compartment cover opened Push the tab in and pull the lock...
Page 646
7-3. Do-it-yourself maintenance Pull the cover toward the front of oil level on the dipstick. the vehicle to remove it. Checking the engine oil Park the vehicle on level ground. After warming up the engine and turning off the engine, wait more than 5 min- utes for the oil to drain back into the bottom of the engine.
Page 648
If low quality oil or oil of an inappropri- or onto the ground. Call your ate viscosity is used Toyota dealer, service station or When driving at high engine speeds auto parts store for information con- or with a heavy load, when towing, or cerning recycling or disposal.
Page 649
7-3. Do-it-yourself maintenance line, add coolant up to the “FULL” line. NOTICE (P.736) When replacing the engine oil V35A-FTS and F33A-FTV Be careful not to spill engine oil on engines the vehicle components. The coolant level is satisfactory if it Avoid overfilling, or the engine is between the “F”...
Page 650
Be sure to read the antifreeze or coolant label. Coolant selection Only use “Toyota Super Long Life Coo- If you spill coolant lant” or a similar high quality ethylene Be sure to wash it off with water to...
Page 651
7-3. Do-it-yourself maintenance Type B No smoking, no naked flames, no sparks Shield eyes Keep away from children Battery acid Terminals Note operating instructions Clamp Type C Explosive gas Keep the engine compartment cover opened or removing the cover (if equipped) P.644 Battery exterior...
Page 652
Red and clear: Replacement is When recharging, the battery produces necessary. Have the battery hydrogen gas which is flammable and checked by your Toyota dealer. explosive. Therefore, observe the fol- lowing precautions before recharging: Clear and red: Charging is nec- If recharging with the battery installed essary.
Page 653
If the engine will not start even after mul- tiple attempts, contact your Toyota If electrolyte gets on your skin dealer. Wash the affected area thoroughly.
Page 654
7-3. Do-it-yourself maintenance Low” appears on the multi-informa- surrounding the air cleaner filter tion display, the washer tank may case. be empty. Add washer fluid. Release the clips. 1GR-FE engine WARNING V35A-FTS engine When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
Page 655
7-3. Do-it-yourself maintenance 1GR-FE engine 1GR-FE engine V35A-FTS engine V35A-FTS engine F33A-FTV engine F33A-FTV engine After checking, make sure the WARNING filter is set properly. Fully To prevent inhaling dust engage the claws and then Wear a respirator when using com- secure the upper cover of the air pressed air to clean the air cleaner fil-...
However, as the oper- may contain dust or sand etc. ation is difficult, we recom- mend having it drained by your Toyota dealer. Even if you decide to drain it yourself, con- tact your Toyota dealer. Components Priming pump...
Page 657
7-3. Do-it-yourself maintenance Turn the drain plug counter- clockwise about 2 to 2 1/2 turns. Operate the priming pump until fuel begins to run out. After draining, tighten the drain plug by hand.
AdBlue™ is consumed in the process of driving. When AdBlue™ is depleted, the engine cannot be restarted. When AdBlue™ needs to be refilled, have it refilled at your Toyota dealer It may be a criminal offence to use a vehicle that does not consume any reagent if it is required for the reduction of emissions.
Page 659
Have AdBlue™ 2400km See AdBlue™ warning light and Owner’s Manual” refilled at your warning message Toyota dealer. When the AdBlue™ level is low, the When AdBlue™ low AdBlue™ level warning light needs to be turns on and a warning message...
Page 660
Be sure to have AdBlue™ refilled at your Toyota dealer before it is com- door. (P.295) pletely depleted. Open the AdBlue™ tank cap. Refilling AdBlue™ by your- self in an emergency Location of the AdBlue™...
Page 661
AdBlue™ is a trademark of the Ger- man Association of the Automotive Industry (VDA). Before driving for a long period of time in an area where AdBlue™ cannot be refilled, consult your Toyota dealer. When refilling AdBlue™ After refilling AdBlue™, the engine may...
When replacing cable Tightly seal AdBlue™ containers and store them in a cool, dry loca- If replacing the cable with a new one, tion with good ventilation and no use a genuine Toyota product or exposure to direct sunlight. equivalent.
Worn tread Also, do not mix tires of remarkably different treadwear. Treadwear indicator Do not use tire sizes other than The location of treadwear indicators is those recommended by Toyota. shown by a “TWI” or “ ” mark, etc.,...
Page 664
(Ways of coping:P.706, 757) When “Immediately Check Tire when Safe” is displayed (Emer- To equalize tire wear and help extend gency Warning) tire life, Toyota recommends that tire The tire pressure warning light comes rotation is carried out approximately...
Page 665
7-3. Do-it-yourself maintenance on and a buzzer sounds when the tire Press of the meter inflation pressure becomes low sud- control switches on the steering denly due to a blowout. (Ways of cop- ing: P.706, 714) However, the wheel and select system may not be able to detect sud- Press of the meter...
Page 666
• If non-genuine Toyota wheels are which it was initialized. For this reason, used. the system may give a warning even if •...
Page 667
When replacing tires or wheels, tire warning valves and transmitters, pressure warning valves and trans- contact your Toyota dealer as the tire pressure warning valves and mitters must also be installed. transmitters may be damaged if not handled correctly.
Page 668
7-3. Do-it-yourself maintenance Initializing the tire pressure Press of the meter control switches and select warning system (if “Vehicle Settings”, and then equipped) press and hold The tire pressure warning sys- tem must be initialized in the Press of the meter following circumstances: control switches and select ...
Page 669
7-3. Do-it-yourself maintenance driving for a long time. However, if ini- Then “Set Pressure Accepted” will be tialization does not complete after driv- displayed on the multi-information dis- ing for 1 hour or more, park the vehicle play. “---” will be displayed on the multi- in a safe place for approximately 20 information display for the inflation minutes and then drive the vehicle...
Page 670
If initialization cannot be completed initialization again as initialization will after performing the above procedure, restart automatically when the engine contact your Toyota dealer. switch has been turned to ON for the next time. WARNING If you accidentally perform initializa-...
Page 671
7-3. Do-it-yourself maintenance How to register the ID codes multi-information display. With 4.2-inch display Park the vehicle in a safe place and turn the engine switch off for 20 minutes or more. Turn the engine switch to ON. (P.256) Press of the meter control switches on the steering...
Page 672
7-3. Do-it-yourself maintenance Registration may take longer than , and then press and hold approximately 1 hour in certain situa- tions, such as when the vehicle is stopped for a long time at traffic lights, etc. Press of the meter Initialize the tire pressure warn- control switches and select ing system.
Page 673
If the ID codes cannot be registered then turn the engine switch off before even when performing the above proce- driving. dure, contact your Toyota dealer. If ID codes are not registered prop- erly Selecting wheel set In the following situations, ID code...
Page 674
7-3. Do-it-yourself maintenance How to change between wheel of a second wheel set is being per- formed. The tire pressure warning light sets will turn off. With 4.2-inch display Initialize the tire pressure warn- Park the vehicle in a safe place ing system.
(P.667) If a tire needs frequent refilling, have it If the tire inflation pressure settings for checked by your Toyota dealer. the installed tires change, initialization Instructions for checking tire infla- operations are required, but if the tire...
(due to road hazards, at your Toyota dealer. expansion joints, sharp edges in : Conventionally referred to as offset. the road, etc.) Toyota does not recommend using the following: NOTICE Wheels of different sizes or types When inspecting and adjusting tire inflation pressure ...
Page 677
(if equipped) Never use oil or grease on the wheel bolts or wheel nuts. Oil and Use only Toyota wheel nuts and grease may cause the wheel nuts wrenches designed for use with to be excessively tightened, leading to bolt or disc wheel damage.
7-3. Do-it-yourself maintenance Air conditioning filter Except for vehicles with model code that has “V” as the last let- The air conditioning filter must be cleaned or changed regu- : The model code is indicated on the manufacturer’s label or the Certifica- larly to maintain air condition- tion Regulation label.
Page 679
7-3. Do-it-yourself maintenance To prevent damage to the filter The “ UP” marks shown on the filter cover should be pointing up. When moving the filter cover in the direction of arrow to release the fit- ting, pay attention not to apply exces- sive force to the claws.
Small flathead screwdriver Lithium battery CR2450 Use a CR2450 lithium battery Batteries can be purchased at your Toyota dealer, local electrical appli- ance shops or camera stores. Replace only with the same or equiva- Remove the depleted battery...
Page 681
Toyota dealer. If you accidentally swallow a battery or put a battery into a part of your body, get emergency medical atten- tion immediately.
7-3. Do-it-yourself maintenance Checking and replacing Engine compartment (V35A-FTS fuses engine) Type A: Keep the engine compartment cover If any of the electrical compo- opened or removing the cover nents do not operate, a fuse (P.644) and push the tab in and lift may have blown.
Page 683
7-3. Do-it-yourself maintenance Type B: Remove the lid. Keep the engine compartment cover opened or removing the cover (P.644) and push the tab in and lift the lid off. Instrument panel (right-hand drive vehicles) Remove the lid. Type C: Push the tab in and lift the lid off.
Page 684
The amperage rating can be found on the fuse box lid. Type C and D: Contact your Toyota dealer. Type A V35A-FTS engine Only type A fuse can be removed using the pullout tool.
Page 685
(P.685) If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in a circuit The fuses are designed to blow, protect- Normal fuse ing the wiring harness from damage.
You may replace the following Have the cause of electrical overload determined and repaired by your bulb by yourself. Before Toyota dealer as soon as possible. replacing, check the wattage of the light bulb to be replaced. As there is a danger that com-...
Page 687
LEDs. If any of the LEDs burn out, take your vehicle to your driver as shown in the illustra- Toyota dealer to have the light replaced. tion. Condensation build-up on the To prevent damage to the unit, cover...
Page 688
7-3. Do-it-yourself maintenance vehicle. unit by inserting it and turning the bulb base clockwise. Turn the bulb base counter- clockwise. Reinstall the light unit. Align the grooves on the light unit with the claws, and insert the light unit straight so that the pin on the light unit fit into the hole.
Page 689
7-3. Do-it-yourself maintenance Reinstall the screws. Do not attempt to repair or disas- semble light bulbs, connectors, electric circuits or component parts. Doing so may result in death or serious injury due to electric shock. To prevent damage or fire Make sure bulb is fully seated and locked.
When trouble arises 8-1. Essential information If the vehicle becomes stuck ........739 Emergency flashers..690 If your vehicle has to be stopped in an emergency......690 If the vehicle is submerged or water on the road is rising ........691 8-2. Steps to take in an emer- gency If your vehicle needs to be towed...
8-1. Essential information Emergency flashers If your vehicle has to be 8-1.Essential information stopped in an emer- gency The emergency flashers are used to warn other drivers when the vehicle has to be Only in an emergency, such as stopped in the road due to a if it becomes impossible to breakdown, etc.
8-1. Essential information press it briefly 3 times or more in If the vehicle is sub- succession. merged or water on the road is rising This vehicle is not designed to be able to drive on roads that are deeply flooded with water. Do not drive on roads where the roads may be submerged or the water may be rising.
Page 693
Laminated glass cannot be shattered with an emergency hammer : Contact your Toyota dealer or aftermarket accessory manufacturer for further information about an emer- gency hammer. : If equipped...
From the front If towing is necessary, we rec- ommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/provincial and local laws.
Page 695
8-2. Steps to take in an emergency Towing with a sling-type truck WARNING Do not tow with a sling-type truck to When towing the vehicle prevent body damage. Be sure to transport the vehicle with all four wheels raised off the ground. If the vehicle is towed with the tires contacting the ground, the drivetrain or related parts may be damaged, the...
Page 696
8-2. Steps to take in an emergency strapping belts. Enter the vehicle being towed and start the engine. NOTICE If the engine does not start, turn the Using a flatbed truck engine switch to ON. Do not overly tighten the tie downs or Put the four-wheel drive control the vehicle may be damaged.
To prevent damage to the vehicle repair. Contact your Toyota during emergency towing dealer as soon as possible. Do not secure cables or chains to the suspension components.
8-2. Steps to take in an emergency running roughly Fuel pump shut off sys- tem (gasoline engine Appreciable loss of power only) Vehicle pulls heavily to one side when braking Vehicle pulls heavily to one side To minimize the risk of fuel leakage when the engine stalls when driving on a level road or when an airbag inflates...
Brake system warning light (warning buzzer) Warning light Details/Actions Indicates a malfunction in: The parking brake system; or The electronically controlled brake system Have the vehicle inspected by your Toyota (Yellow) dealer immediately. Charging system warning light (warning buzzer) Warning light Details/Actions Indicates a malfunction in the vehicle’s charging sys-...
Page 700
The electronic throttle control system; The emission control system (if equipped); The electronic automatic transmission control sys- tem; or The DPF system (if equipped) Have the vehicle inspected by your Toyota dealer immediately. SRS warning light Warning light Details/Actions Indicates a malfunction in: ...
Page 701
Warning light Details/Actions Indicates a malfunction in: The Multi-terrain ABS; or The brake assist system Have the vehicle inspected by your Toyota dealer immediately. Power steering system warning light Warning light Details/Actions Indicates a malfunction in the power steering system ...
Page 702
Warning light Details/Actions Indicates a malfunction in the BSM (Blind Spot Moni- tor) function Have the vehicle inspected by your Toyota dealer immediately. Indicates that the rear bumper around the radar sen- (If equipped) sor is covered with dirt, etc. (P.368) ...
Page 703
Warning light Details/Actions Indicates a malfunction in the RCD (Rear Camera Detection) function Have the vehicle inspected by your Toyota dealer immediately. Indicates that the function temporarily cannot be used (if equipped) due to the camera being dirty, etc.
Page 704
When a buzzer sounds: Indicates a malfunction in: The Brake Override System The Drive-Start Control Have the vehicle inspected by your Toyota dealer immediately. Indicates that the shift position was changed and Drive-Start Control was operated while depressing the accelerator pedal.
Page 705
The hill-start assist control system; The downhill assist control system (if equipped) The Multi-terrain Select (If equipped); or The Crawl Control (If equipped) Have the vehicle inspected by your Toyota dealer immediately. Low speed four-wheel drive indicator light Warning light...
Page 706
8-2. Steps to take in an emergency Rear differential lock indicator Warning light Details/Actions Indicates a malfunction in the rear differential lock system when the light flashes rapidly. Have the vehicle inspected by your Toyota (Flashes) dealer immediately. (If equipped) Parking brake indicator Warning light...
Page 707
Warning light Details/Actions When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as (If equipped) ...
Page 708
In some cases, the buzzer may not be heard because of noisy place or an If the malfunction indicator lamp does audio sound. not go off, contact your Toyota dealer as soon as possible. Front passenger detection sensor, seat belt reminder and warning...
Page 709
(P.667) Stop your vehicle in a safe place The tire pressure warning light may immediately and contact your Toyota come on due to natural causes dealer. The vehicle will become (vehicles with tire pressure warn-...
Toyota dealer. Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately.
Page 711
If a message that indicates the A warning message is shown when need for visiting your Toyota dealer is displayed Drive-Start Control or Parking Support Brake (if equipped) (P.237, 388) oper- The system or part shown on the multi- information display is malfunctioning.
Page 712
This message Immediately stop the vehicle in a safe may be displayed if the vehicle is place and contact your Toyota dealer. stopped on a slope. Move the vehicle to Continuing to drive the vehicle may be a level surface and check if the mes- dangerous.
Page 713
Dynamic radar cruise control changed. : If equipped Check and change the engine oil, and oil filter by your Toyota dealer. After If a message that indicates the mal- changing the engine oil, make sure to function of radar sensor is dis- reset the message.
Page 714
8-2. Steps to take in an emergency porarily. Use the system when it becomes available again. If a following message is shown, take appropriate action and con- firm that the message has disap- peared. • “CRAWL Unavailable See Owner’s Manual” (P.483) •...
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P.662 WARNING If you have a flat tire Do not continue driving with a flat tire.
Page 716
8-2. Steps to take in an emergency Location of the spare tire, jack and tools 5-passenger models Jack Tool bag Spare tire 7-passenger models Jack Tool bag Spare tire...
Page 717
8-2. Steps to take in an emergency Tools Only use the tire jack that comes with this vehicle for replacing a flat tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle. Put the jack properly in its jack point.
Page 718
8-2. Steps to take in an emergency the exact reverse order from which they Taking out the jack were removed. Also, the jack should be properly secured using a rubber strap. Remove the cover. Taking out the tool bag Lift the deck board. ...
Page 719
8-2. Steps to take in an emergency 7-passenger models Insert the jack handle into the lowering screw. Taking out the spare tire Lower Raise Assembling the jack handle. Place a rag under the jack handle to Remove the jack handle extension bar and wheel nut wrench from the tool bag protect the rear bumper.
Page 720
8-2. Steps to take in an emergency Vehicles with aluminum wheels: the beveled end of the wheel Remove the spare wheel cover. ornament remover as shown. Slightly loosen the wheel nuts Replacing a flat tire (one turn). Chock the tires. Assembling the jack handle.
Page 721
8-2. Steps to take in an emergency nut wrench. Raise the vehicle until the tire is slightly raised off the ground. Assemble the jack handle bar, jack handle extension bar and Remove all the wheel nuts and wheel nut wrench and tighten the tire.
Page 722
When replacing a steel wheel with a vehicle inspected by your Toyota steel wheel, tighten the nuts until the dealer. tapered portion comes into loose •...
Page 723
8-2. Steps to take in an emergency Vehicles with steel wheels contact with the disc wheel Reinstall the wheel ornament. Lower the vehicle. Vehicles with aluminum wheels Remove the center wheel ornament from the flat tire by pushing from the reverse side, and reinstall it.
Page 724
8-2. Steps to take in an emergency Confirm that the tire is not loose Install the holding bracket after tightening: Turn the jack handle extension clockwise to take up slack in the chain. Then, check to ensure the holding bracket is centered in the wheel hub. Push and pull the tire Try rotating Visually check to ensure the tire is not...
Page 725
8-2. Steps to take in an emergency Certification for the jack...
The engine may be flooded. tires or the tire pressure warning valve and transmitter, contact your (gasoline engine) Toyota dealer as the tire pressure Try to restart the engine again warning valve and transmitter may be damaged if not handled correctly.
Page 727
The battery may be discharged. (P.729) One or both of the battery termi- nals may be disconnected. There may be a malfunction in the steering lock system. Contact your Toyota dealer if the...
If the electronic key remains lost, the start system and wireless risk of vehicle theft increases signifi- remote control cannot be used. cantly. Visit your Toyota dealer imme- In such cases, the doors can diately with all remaining electronic keys that were provided with your be opened and the engine can vehicle.
Page 729
8-2. Steps to take in an emergency : These settings must be customized NOTICE at your Toyota dealer. In case of a smart entry & start system malfunction, or other key WARNING related problems Take your vehicle with all the elec-...
Press the engine switch shortly the vehicle’s battery is dis- and firmly. charged. You can also call your Toyota Vehicles with fingerprint authentica- dealer or a qualified repair tion system: Use the customization shop.
Page 731
8-2. Steps to take in an emergency Open the positive (+) battery ter- Lift the edge of the cover to disengage the fixed pins, and then pull the cover minal cover. towards you to remove it. V35A-FTS engine: Remove the engine cover.
Page 732
8-2. Steps to take in an emergency moving parts as shown in the illustration V35A-FTS engine (left-hand drive vehicles) Positive (+) battery terminal (your vehicle) Positive (+) battery terminal (second vehicle) Negative (-) battery terminal (second vehicle) Solid, stationary, unpainted metallic point away from the battery and any moving parts as shown in the illustration ...
Page 733
8-2. Steps to take in an emergency Negative (-) battery terminal (second vehicle) Solid, stationary, unpainted metallic point away from the battery and any moving parts as shown in the illustration F33A-FTV engine (left-hand drive vehicles) Type A: Positive (+) battery terminal (your vehicle) Positive (+) battery terminal (second vehicle) Negative (-) battery terminal (second vehicle) Solid, stationary, unpainted metallic point away from the battery and any...
Page 734
Open and close any of the doors nected. of your vehicle with the engine Once the engine starts, have the switch off. vehicle inspected at your Toyota Maintain the engine speed of dealer as soon as possible. the second vehicle and start the...
Page 735
Contact your Toyota dealer for and death or serious injury. details. Use a battery that conforms to Euro-...
Page 736
When replacing the battery the battery: For information regarding battery Make sure each jumper cable is replacement, contact your Toyota connected to the correct terminal dealer. and that it is not unintentionally in contact with any other than the intended terminal.
Steam comes out from under Intercooler radiator (if equipped) the hood. If a large amount of coolant leaks, immediately contact your Toyota dealer. Correction procedures The coolant level is satisfactory if it is between the “FULL” and Stop the vehicle in a safe place “LOW”/“F”...
Page 738
Water can be used in an emergency if coolant is unavailable. If the fans are not operating: Engine coolant Stop the engine immediately 1GR-FE engine: and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 739
(such as sand or If the message does not disappear: dust etc.). Stop the engine and contact your Do not use any coolant additive. Toyota dealer. If the message is not displayed: Have the vehicle inspected at the nearest Toyota dealer. WARNING...
10 seconds and try step again. If the engine still does not start, contact your Toyota dealer. When it is difficult to free the vehi- After starting the engine, depress Try the followings.
Page 741
8-2. Steps to take in an emergency Using Multi-terrain Select (P.486) : If equipped WARNING When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or peo- ple.
9-1. Specifications Maintenance data (fuel, oil level, etc.) 9-1.Specifications Dimensions For vehicles with model code that has “A”, “G”, “V” or “Z” as the 4th letter from “-” : The model code is indicated on the manufacturer’s label or the Certification Regu- lation label.
Page 744
9-1. Specifications *1, 4, 5 4985 mm (196.3 in.) *1, 6 5005 mm (197.0 in.) Overall length 5015 mm (197.4in.) 5140 mm (202.4 in.) : Vehicles without pintle hook and hitch cover (type A) (P.243) : Vehicles with hitch cover (type A) (P.243) : Vehicles with pintle hook : Vehicles without license bracket : Vehicles with license bracket (except for EU license plate model)
Page 745
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identifi- cation number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the front right frame.
Page 746
9-1. Specifications 1GR-FE engine : Diesel engine : Saudi Arabia, Sultanate of Oman, V35A-FTS engine Bahrain, United Arab Emirates, Qatar, Kuwait : Gasoline engine Year of manufacture and country of origin (GCC coun- tries , Yemen, Iraq, Lebanon and Jordan) The year of the manufacture and country of origin are shown on the...
Page 747
9-1. Specifications Valve clearance Automatic adjustment Drive belt tension Automatic adjustment 190 km/h (118 mph) Maximum vehicle speed 385 N•m @ 4400 rpm Maximum torque (NET) 202 kW @ 5600 rpm Maximum output (NET) : For vehicles with model code that has “V”...
Page 748
9-1. Specifications 210 km/h (130 mph) Maximum vehicle speed 700 N•m @ 1600 - 2600 rpm Maximum torque (NET) 225 kW @ 4000 rpm Maximum output (NET) : For vehicles with model code that has “V” as the last letter : The model code is indicated on the manufacturer’s label or the Certification Reg- ulation label.
Page 749
5 minutes, and check the oil level on the dip- stick. Engine oil selection Temperature range anticipated “Toyota Genuine Motor Oil” is used before next oil change in your Toyota vehicle. Use Toyota Preferred approved “Toyota Genuine Motor Oil viscosity (0W-20 is explained Oil”...
Page 750
API Service Symbol your Toyota dealer Top portion: “API SERVICE SP” means “Toyota Genuine Motor Oil” is used the oil quality designation by American in your Toyota vehicle. Use Toyota Petroleum Institute (API). approved “Toyota Genuine Motor Center portion: “SAE 0W-20”...
Page 751
Toyota dealer • The 5W in 5W-30 indicates the “Toyota Genuine Motor Oil” is used characteristic of the oil which in your Toyota vehicle. Toyota rec- allows cold startability. Oils with...
Page 752
11.6 L (12.3 qt., 10.2 Imp.qt.) Capacity 13.8 L (14.6 qt., 12.1 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non- Coolant type borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 753
14.6 L (15.4 qt., 12.8 Imp.qt.) *3, 5 14.7 L (15.5 qt., 12.9 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non- Coolant type borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 754
15.3 L (16.2 qt., 13.5 Imp.qt.) *4, 6 15.8 L (16.7 qt., 13.9 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non- Coolant type borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 755
Front Without front differential lock system: 1.16 L (1.23 qt., 1.02 Imp.qt.) Oil capacity With front differential lock system: 1.32 L (1.39 qt., 1.16 Imp.qt.) Toyota Genuine Differential Gear Oil LT 75W-85 Oil type and viscosity GL-5 or equivalent...
Page 756
Toyota Genuine Differential Gear Oil LX 75W-85 slip differential GL-5 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equiva- lent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 757
Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the fac- tory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equiva- lent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 758
9-1. Specifications Rear Spider Lithium base chassis grease, NLGI No.2 Steering Free play Less than 30 mm (1.18 in.) ® Power steering fluid type Automatic transmission fluid DEXRON II or III Electrical winch (if equipped) Capacity 9806N (1000 kgf, 2204lbf) Fluid capacity 1.0 L (1.1 qt., 0.9 Imp.qt.) ®...
Page 759
9-1. Specifications 18 7 1/2J Wheel size Wheel nut torque 131 N•m (13.4 kgf•m, 97 ft•lbf) 17-inch tires Tire size 245/75R17 112H Front tire Rear tire Tire inflation pressure (Recom- kPa (kgf/cm or bar, kPa (kgf/cm or bar, mended cold tire inflation pres- psi) psi)
Vehicles with DPF system: Do not use a fuel that contains more than 10 ppm of sulfur. Use of such a high Use of ethanol blended gasoline in sulfur fuel may damage the engine. a gasoline engine Toyota allows the use of ethanol...
Page 761
You must ensure that refueling is carried out only from a source where fuel specification and quality can be guaranteed. In case of any doubt, ask your Toyota dealer. For Argentina: Observe the follow- ing INFORMATION FUEL QUALITY: Use only diesel fuel...
Customizable Features Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the multimedia system Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, –...
Page 763
9-2. Customization Alarm (P.111) Customized set- Function Default setting ting Cancellation when the mechani- – – cal key is used to unlock : If equipped Gauges, meters and multi-information display (P.129, 133, 137, 146) Customized set- Default setting Function ting Clock (time adjustment) –...
Page 764
9-2. Customization Customized set- Default setting Function ting Multi-Information display off – – On (when the vehicle is Suggestion function – stopped) Sensor sensitivity for darkening the brightness of the instrument Standard -2 to 2 – – cluster depending on the outside brightness Sensor sensitivity for returning the brightness of the instrument...
Page 765
9-2. Customization Customized set- Function Default setting ting – – Compass – – Audio system operation status : If equipped Door lock (P.169, 727) Customized set- Function Default setting ting Driver’s door All doors unlocked in first Unlocking using a mechanical unlocked in first step, all doors –...
Page 766
9-2. Customization Customized set- Function Default setting ting Time elapsed before the auto- 60 seconds matic door lock function is acti- 30 seconds – vated if a door is not opened 120 seconds after being unlocked Open door reminder buzzer –...
Page 767
9-2. Customization Customized set- Function Default setting ting The function that activates the On (Unlocking all the door) switch of the wireless – – remote control when locking the On (Unlocking *1, 2 back door only) door (P.176) – – Alarm (panic mode) : If equipped : The default setting varies according to country.
Page 768
9-2. Customization Customized set- Function Default setting ting Automatic opening of the back door using the back door opener – – switch Close & lock (Walk-Away) func- – – tion – – Hands free power back door – – Kick sensor sensitivity Hands Free close &...
Page 769
9-2. Customization Customized set- Function Default setting ting Tilt only Steering wheel movement when Tilt & telescopic Telescopic only – – exiting the vehicle : If equipped Outside rear view mirrors (P.211) Customized set- Function Default setting ting Linked to lock- Automatic folding and extend- Linked to opera- ing/unlocking of...
Page 770
9-2. Customization Moon roof (P.217) Customized set- Function Default setting ting Linked operation of compo- nents when mechanical key is Slide only Tilt only – – used Linked operation of compo- nents when wireless remote Slide only Tilt only – –...
Page 771
9-2. Customization Rear window wiper (P.292) Customized set- Function Default setting ting Back door opening linked rear – – window wiper stop function Washer linked rear window – – wiper operation AHS (Adaptive High-beam System) (P.280) Customized set- Function Default setting ting ...
Page 772
9-2. Customization : If equipped : The headlights will operate under Automatic High Beam control. (P.284) : For vehicles without model code that has “W” as the last letter : For vehicles with model code that has “W” as the last letter : The model code is indicated on the manufacturer’s label or the Certification Reg- ulation label.
Page 773
9-2. Customization Customized set- Function Default setting ting 5km/h (3mph) Excess speed notification level 2km/h (1mph) – – 10km/h (5mph) No notification No overtaking notification Display and Display only – – method steering wheel vibration No notification Other notifications method (No- Display only –...
Page 774
RCTA (Rear cross traffic alert) – – function Level 1 Buzzer volume Level 2 – – Level 3 : If equipped Toyota parking assist-sensor (P.372) Customized set- Function Default setting ting Toyota parking assist-sensor – – Level 1 Buzzer volume Level 2 –...
Page 775
9-2. Customization Stop & Start system (P.361) Customized set- Function Default setting ting Change the Stop & Start system Standard Extended – – duration when the A/C is on : If equipped Automatic air conditioning system (P.556, 567) Customized set- Function Default setting ting...
Page 776
9-2. Customization Customized set- Function Default setting ting Operation after the engine – – switch is turned off Operation when you approach the vehicle with the electronic – – key on your person Operation when the doors are – – unlocked Time elapsed before the outer ...
Page 777
9-2. Customization My Settings (P.224) Customized set- Function Default setting ting My Settings function – – Fingerprint authentication system (P.115) Customized set- Function Default setting ting Fingerprint authentication sys- – tem function : If equipped : The setting cannot be changed if fingerprint information is not registered. : It will automatically switch to “ON”...
• Battery has been reinstalled P.469 Multi-terrain Monitor • The steering wheel has been moved while the battery was P.418 Toyota parking assist monitor being reinstalled • Battery power is low Crawl Control (with Turn Assist • After reconnecting the battery P.485 function) •...
The engine does not start cal keys, new genuine keys or Did you press the engine switch mechanical keys can be made by your Toyota dealer. (P.727) while firmly depressing the brake If you lose your electronic keys, pedal? (P.256) the risk of vehicle theft increases ...
Page 782
What to do if... (Troubleshooting) flashing The shift lever cannot be shifted from P even if you Are the driver and the passengers depress the brake pedal P.706, 707 wearing the seat belts? ( Is the engine switch in ON? If ...
Page 783
What to do if... (Troubleshooting) When a problem has occurred If you have a flat tire Stop the vehicle in a safe place and replace the flat tire with the spare tire. (P.714) The vehicle becomes stuck Try the procedure for when the vehicle becomes stuck in mud, dirt, or snow.
Alphabetical Index Alphabetical Index Side and curtain shield airbags pre- cautions........48 A/C .........556, 567, 580 SRS airbags .........43 Air conditioning filter....677 SRS warning light.......699 Automatic air conditioning system Air conditioning filter ....677 .........556, 567, 580 Air conditioning system556, 567, 580 Eco air conditioning mode..
Page 785
Alphabetical Index Eco air conditioning mode.. 559, 571 ® Bluetooth ........553 Front seat concentrated airflow Audio system......534 mode (S-FLOW) ....563, 575 Hands-free system (for cellular Automatic headlight leveling system phone)........534 ............. 276 ® Registering a Bluetooth device 538 Automatic High Beam (AHB) ..284 ®...
Page 786
Alphabetical Index Child-protectors......172 Radar sensor......298 Seat belts ........623 Child restraint system....54, 85 Child restraint system installation Clock ........131, 135 method......... 79, 87 Coat hooks ........617 Child seats definition....54, 85 Condenser ........649 Child seats installation ...55, 88 Console box ........594 Consumption screen ....161 Fixed with a seat belt .....
Page 787
Driving information display .138, 148 RSA (Road Sign Assist)..... 331 Driving mode select switch ..473 Driving position memory .....220 Toyota multi-operation touch ..602 Toyota parking assist-sensor ..372 Memory recall function ....222 Warning messages ....709 Power easy access system..220 Do-it-yourself maintenance ..
Page 788
Alphabetical Index properly........727 an emergency ......690 Ignition switch (Engine switch) ...256 Replacing the battery ....679 Electronic-Kinetic Dynamic Suspen- Overheating........736 sion System ........ 495 Tachometer ......129, 133 Emergency, in case of Engine coolant If a warning buzzer sounds ..698 Capacity ........751 Checking ........648 If a warning light turns on...
Page 789
Alphabetical Index Washer........652 Refueling ........294 Fuel filter........655 Fog lights Replacing light bulbs....685 Fuel gauge......129, 133 Switch ........287 Fuel pump shut off system ..697 Footwell lights ......589 Fuses ..........681 Front differential lock system ..478 Front fog lights Replacing light bulbs....
Page 790
Alphabetical Index Hood Hood .......... 640 Jack Open .......... 640 Vehicle-equipped jack ....715 Warning message ...... 172 Jack handle ........715 Hooks Jam protection function Cargo hooks....... 598 Front seats .........195 Coat hooks......... 617 Moon roof ........217 Retaining hooks (floor mat)..36 Power back door ......182 Horn ..........
Page 791
Alphabetical Index LDA (Lane Departure Alert with Yaw Assist Function) ......324 Maintenance Operation ........324 Do-it-yourself maintenance ..638 Warning messages ....330 Maintenance data.......742 Lever Maintenance requirements..626 Auxiliary catch lever ....640 Malfunction indicator lamp ..699 Hood lock release lever ..... 640 Manual headlight leveling dial..277 Shift lever ......
Page 792
Outside rear view mirrors ....211 Suggestion function ... 145, 155 Adjusting and folding....211 Tire pressure......663 BSM (Blind Spot Monitor)...368 Toyota parking assist-sensor ..372 Folding and extending....212 Units......144, 154, 762 Linked mirror function when revers- Vehicle information display 140, 150 ing ..........213...
Page 793
Alphabetical Index Parking Support Brake function Dynamic radar cruise control with (rear-crossing vehicles) ... 397 full-speed range .......335 Parking Support Brake function Dynamic radar cruise control ..348 (static objects) ......394 Radiator .........649 Warning light ......702 Radio..........517 Warning message ...... 392 RCD (Rear Camera Detection) ..384 PCS (Pre-Collision System) Function ........384...
Page 794
Emergency Locking Retractor..40 RCTA .........368 How to wear your seat belt ..39 Tilt sensor........112 How your child should wear the seat Toyota parking assist-sensor ..372 belt ..........40 Toyota Safety Sense....297 Pregnant women, proper seat belt Shift lever ......261, 264 use ..........39...
Page 795
Alphabetical Index Heaters ......559, 571 Stuck If the vehicle becomes stuck ..739 Linked mirror function when revers- ing ..........213 Suggestion function .....145, 155 Mirror position memory ....221 Sunshade........217 RCTA (Rear Cross Traffic Alert) 379 Sun visors ........607 Side turn signal lights Switches “SOS”...
Page 796
Trailer sway control ....495 Tachometer ......129, 133 Trailer towing......239 Tail lights Toyota multi-operation touch ..602 Replacing light bulbs....685 Toyota parking assist monitor ..408 Switch ........275 Driving precautions ....408 Theft deterrent system Screen display......409 Alarm.......... 111 Using the system......410 Double locking system ....
Page 797
Transmission RSA (Road Sign Assist) .....331 Seat belt reminder....706, 707 Automatic transmission..261, 264 M mode ........263 Toyota parking assist-sensor ..372 S mode........267 Vehicle sway warning..318, 327 TRC (Traction Control)....495 Warning lights Trip meters ......129, 133 ABS ..........700...
Page 798
Alphabetical Index listed below. indicator ........702 Warning messages....... 709 • Navigation system Washer • Audio system Toyota Motor Europe NV/SA, Checking ........652 Avenue du Bourget 60 - 1140 Low washer fluid warning message Brussels, Belgium ......... 652, 709 www.toyota-europe.com Preparing and checking before win- ter ..........
Page 800
Smart entry & start system and engine immobilizer system For vehicles sold in Tahiti...
Page 805
For vehicles sold in Ukraine For vehicles sold in the Dominican Republic and Federated States of Micronesia For vehicles sold in Argentina For vehicles sold in Jamaica...
Page 806
For vehicles sold in Paraguay For vehicles sold in Nigeria...
Page 807
Smart entry & start system For vehicles sold in Federated States of Micronesia and Saint Martin...
Page 834
For vehicles sold in Vietnam For vehicles sold in the United Arab Emirates For vehicles sold in Jordan For vehicles sold in Jamaica...
Page 835
For vehicles sold in Paraguay For vehicles sold in South Africa...
Page 836
For vehicles sold in Federated States of Micronesia and Saint Martin...
Page 848
For vehicles sold in Ukraine For vehicles sold in Pakistan For vehicles sold in Jordan...
Page 849
Millimeter wave radar sensor For vehicles sold in Ukraine For vehicles sold in Vietnam For vehicles sold in Jordan For vehicles sold in Jamaica...
Page 850
For vehicles sold in Paraguay For vehicles sold in Belize Blind Spot Monitor...
Page 881
GAS STATION INFORMATION Auxiliary catch lever (P.640) Power back door switch (P.177) Fuel filler door (P.295) Tire inflation pressure (P.757) Fuel filler door opener (P.295) Hood lock release lever (P.640) : if equipped Vehicles with- out sub fuel 80 L (21.1 gal., 17.6 Imp.gal.) tank system Fuel tank capacity (Reference)
Need help?
Do you have a question about the Land Cruiser Station Wagon and is the answer not in the manual?
Questions and answers