Toyota Land Cruiser 1988 Repair Manual page 225

C0-8
COOLING SYSTEM- Water Pump
5. INSTALL WATER PUMP PULLEY, FLUID
COUPLING. FAN AND ALTERNATOR DRIVE BELT
(a) Install fan to the fluid coupling.
(b) Place the fan shroud together with the fluid cou-
pling in the position.
(c) Install the water pump pulley and fluid coupling
with the four nuts.
(d) Place the drive belt onto each pulley.
(e) Stretch the belt tight and tighten the four nuts.
(f) Adjust the water pump drive belt tension.
(See page MA-4)
6. INSTALL FAN SHROUD BOLTS
7. CONNECT RADIATOR INLET HOSE
8. CONNECT COOLANT RESERVOIR HOSE
9. INSTALL AND ADJUST PS DRIVE BELT
(See page MA-4)
10.
FILL WITH ENGINE COOLANT (See page C0-3)
11. START ENGINE AND CHECK FOR LEAKS