Toyota Land Cruiser 1988 Repair Manual page 46

ENGINE MECHANICAL- Cylinder Head EM-15
2 3 4 5 6 7 8 9 10 11 12
EM1535
NOTE: Arrange the push rods in correct order.
24. REMOVE CYLINDER HEAD
(a) Uniformly loosen and remove the fifteen head bolts
in several passes, in the sequence shown.
CAUTION: Head warpage or cracking could re-
sult from removing the bolts in incorrect order.
(b) Remove the air pump bracket with engine hanger.
(c) Lift the cylinder head from the dowels on the cylin-
der block and place it on wooden blocks on a
bench.
NOTE: If the cylinder head is difficult to lift off, pry with
a screwdriver between the cylinder head and block
saliences.
CAUTION: Be careful not to damage the cylin-
der head and block surface on the cylinder and
head gasket sides.