Toyota Land Cruiser 1988 Repair Manual page 244

LUBRICATION SYSTEM- Oil Pump LU-11
2. INSTALL OIL OUTLET PIPE
(a) Place the outlet pipe in position.
(b) Install and torque the union bolt with new two gas-
kets.
Torque: 450 kg-em (33 ft-lb, 44 N·m)
(c) Install and torque the union nut.
Torque: 450 kg-em (33 ft-lb, 44 N·m)
3. INSTALL OIL PAN
(a) Apply seal packing to the cylinder block, the No. 1
and No. 4 main bearing caps as shown.
Seal packing: Part No. 08826-00080 or
equivalent
(b) Install a new gasket and the oil pan with the twenty-
two bolts.
Torque: 80 kg-em (69 in.-lb, 7.8 N·m)
4. FILL WITH ENGINE OIL (See step 3 on page LU-4)
5. START ENGINE AND CHECK FOR LEAKS
6. RECHECK OIL LEVEL
Recheck the engine oil level and refill if necessary.