Injectors - Toyota Land Cruiser 1988 Repair Manual

Table of Contents

Advertisement

EFI SYSTEM - Fuel System
Injectors
Connector Terminal
INLET
ON-VEHICLE INSPECTION
1.
INSPECT INJECTOR OPERATION
Check operation sound from each injector.
Fl-57
F12478
(a) With the engine running or cranking, use a sound
scope to check that there is normal operating noise
in proportion to engine rpm.
(b) If you have no sound scope, you can check the
injector transmission operation with your finger.
If no sound or an unusual sound is heard, check the
wiring connector, injector or injection signal from ECU.
2.
INSPECT INJECTOR RESISTANCE
(a) Disconnect the injector connector.
(b) Using an ohmmeter, measure the resistance be-
tween the terminals.
Resistance:
Approx. 13.8 0
If the resistance is not as specified, replace the injector.
(c) Reconnect the injector connector.

Advertisement

Table of Contents
loading

Table of Contents