Toyota Land Cruiser 1988 Repair Manual page 291

FRONT AXLE AND SUSPENSION -Front Wheel Alignment
Front
1'
A: Inside
B: Outside
SA0028
81292
6. ADJUST WHEEL ANGLE
Remove the caps of the knuckle stopper bolts and check
the steering angles.
Wheel angle
Max.
Inside wheel
32"~3~·
Outside wheel 30"
at 20"
Inside wheel 21"
(Outside wheel)
NOTE: When the steering wheel is fully turned, make
sure that the wheel is not touching the body or brake
flexible hose.
If maximum steering angles differ from the standard
value, adjust the wheel angle with the knuckle stopper
bolts.
Torque: 450 kg-em {33 ft-lb, 44 N·m)
If the wheel angle still cannot be adjusted within limits,
inspect and replace damaged or worn steering parts.
7. INSPECT SIDE SLIP WITH SIDE SLIP TESTER
Side slip limit:
less than 3.0 mm/m (0.118 in./3.3 ft)
If the side slip exceeds the limit, the toe-in or other front
wheel alignment may not be correct.