Toyota Land Cruiser 1988 Repair Manual page 294

FRONT AXLE AND SUSPENSION- Front Axle Hub FA-7
02955
FA0190
SA0167
4. REMOVE INNER BEARING AND OIL SEAL
(a) Using SST, remove the oil seal.
SST 09308-0001 0
(b) Remove the inner bearing from the hub.
INSPECTION AND REPAIR OF FRONT
AXLE HUB
1. INSPECT BEARING
Clean the bearings and outer races and inspect them for
wear or damage.
2.
REPLACE BEARING OUTER RACE
(a) Using a brass bar and hammer, drive out the bearing
outer race.
(b) Using SST, carefully drive in the new bearing outer
race.
SST 09608-35014
Inner Bearing (09608-06020, 09608-0621 0)
Outer Bearing (09608-06020, 09608-06200)
ASSEMBLY OF FRONT AXLE HUB
(See page FA-5)
1. PACK BEARINGS WITH MP GREASE
(a) Place M P grease in the palm of your hand.
(b) Pack grease into the bearing, continuing until the
grea~e
oozes out from the other side.
(c) Do the same around the bearing circumference.
2. COAT INSIDE OF HUB AND CAP WITH MP
GREASE