Toyota Land Cruiser 1988 Repair Manual page 329

AC-8
AIR CONDITIONING SYSTEM -Compressor
•
.
.
.
AC1242 AC1243
AC0065
AC0029
12. REMOVE FRONT AND REAR 0-RING FROM
CYLINDER BLOCK
Discard the 0-rings.
ASSEMBLY OF COMPRESSOR
1. INSTALL REAR VALVE PLATE ON REAR
CYLINDER
(a) Install two pins in the rear cylinder.
(b) Lubricate a new 0-ring with compressor oil. Install
the 0-ring in the rear cylinder.
(c) Install the rear suction valve over the pins on the
rear cylinder.
NOTE: The front and rear suction valves are identical.
(d) Install the rear valve plate together with the dis-
charge valve over the pins on the rear cylinder .
NOTE: The rear valve plate is marked with an "R."
(e) Lubricate the new gasket with compressor oil. In-
stall the gasket on the valve plate.
2. INSTALL REAR HOUSING ON REAR CYLINDER
3. INSTALL FRONT VALVE PLATE ON FRONT
CYLINDER
(a) Install the two pins in the front cylinder.
(b) Lubricate a new 0-ring with compressor oil. Install
the 0-ring in the rear housing.
(c) Install the front suction valve over the pins on the
front cylinder.
(d) Install the front valve plate together with the dis-
charge valve over the pins on the front cylinder.
NOTE: The front valve plate is marked with a "F."
(e) Lubricate the new gasket with compressor oil. In-
stall the gasket on the valve plate.