Toyota Land Cruiser 1988 Repair Manual page 228

COOLING SYSTEM- Radiator C0-11
REMOVAL OF RADIATOR
1. DISCHARGE REFRIGERATION SYSTEM
2. DRAIN ENGINE COOLANT (See page C0-3)
3. REMOVE FRONT TURN SIGNAL LAMP
ASSEMBLY, RADIATOR GRILLE AND
HEADLAMP DOORS
4. REMOVE HOOD ROCK BRACE, HOOD ROCK
AND GRILLE CENTER SUPPORT
5. DISCONNECT DISCHARGE HOSE AND LIQUID
TUBE
NOTE: Cap the open fittings immediately to keep mois-
ture out of the system.
6. REMOVE COOLER CONDENSER
Remove the four bolts and condenser.
7. DISCONNECT COOLANT RESERVOIR HOSE
8. DISCONNECT RADIATOR HOSES
9.
DISCONNECT A/TOIL COOLER HOSES
NOTE: Be careful as some oil will leak out. Catch it in
a suitable container.
10. REMOVE FAN SHROUD MOUNTING BOLTS
11. REMOVE RADIATOR MOUNTING BOLTS, NUTS
AND RADIATOR
INSTALLATION OF RADIATOR
1. INSTALL RADIATOR
2. INSTALL FAN SHROUD MOUNTING BOLTS
3. CONNECT A/TOIL COOLER HOSES
4. CONNECT RADIATOR HOSES
5. CONNECT COOLANT RESERVOIR HOSE
6. INSTALL COOLER CONDENSER
7. CONNECT DISCHARGE HOSE AND LIQUID TUBE
8. INSTALL HOOD ROCK BRACE, HOOD ROCK AND
GRILLE CENTER SUPPORT