Toyota Land Cruiser 1988 Repair Manual page 74

ENGINE MECHANICAL- Timing Gears and Camshaft
EM-43
SST
6.
(c) Align the pulley set key with the key groove of the
pulley.
(d) Using SST and a hammer, tap in the pulley.
SST 09214-60010
(e) After installed the pulley, torque the cover bolts.
Torque: ·
Bolts A 250 kg-em (18ft-lb. 25 N·m)
Bolts B and C 50 kg-em (43 in-lb. 4.9 N·m)
(f) Using SST and a 46-mm socket wrench, install and
torque the pulley mount bolt.
SST 09213-58011 and 09330·-00020
Torque: 3,500 kg-em (253ft-lb. 343 N·m)
INSTALL PS PULLEY TO CRANKSHAFT PULLEY
Install the PS pulley with the six bolts. torque the bolts.
Torque: 185 kg-em (13ft-lb, 18 N·m)
7. INSTALL VALVE LIFTERS
Carefully insert the twelve lifters into the lifter bore.