Toyota Land Cruiser 1988 Repair Manual page 57

EM-26
t
Upward
ENGINE MECHANICAL- Cylinder Head
Valve Rotator
EM1384
Painted Green
or Yellow
EM4374
ASSEMBLY OF CYLINDER HEAD
(See page EM-11)
NOTE:
• Thoroughly clean all parts to be assembled.
• Before installing the parts, apply new engine oil to all
sliding and rotating surfaces.
• Replace all gaskets and oil seals with new ones.
1. INSTALL VALVES
(a) Place the valve spring seat on spring seat.
(b) Using SST and a hammer, tap in a new oil seal.
SST 09201 -31 01 0
(c) Install the valve, spring and spring retainer (or valve
rotator).
NOTE: Install the spring with the correct direction as
shown.