Toyota Land Cruiser 1988 Repair Manual page 62

ENGINE MECHANICAL- Cylinder Head
EM-31
EM4375
11. INSTALL AIR PUMP
(a) Install the air pump with the through bolt and nut.
(b) Install the air pump stay with the bolt and nut.
(c) Connect the air hose.
12. RAISE VEHICLE
CAUTION: Be sure the vehicle is securely sup-
ported.
13. CONNECT EXHAUST PIPE TO EXHAUST
MANIFOLD
(a) Place two new gasket on the exhaust pipe.
(b) Connect the exhaust pipe with four new nuts.
Torque the nuts.
Torque: 630 kg-em (46 ft-lb, 62 N·m)
14. CONNECT FUEL HOSES
15. CONNECT RADIATOR UPPER HOSE
16. INSTALL HEATER WATER (OIL COOLER) PIPE
(a) Install the heater water (oil cooler) pipe with the
bolts.
(b) Connect the hoses to the water outlet, water pump,
oil cooler and heater water pipe.
17. CONNECT HIGH-TENSION CORDS TO SPARK
PLUGS AND IGNITION COIL
18. INSTALL PS PUMP AND A/C COMPRESSOR
BRACKETS
19. INSTALL A/C COMPRESSOR
(a) Install the A/ C compressor with the four bolts.
(b) Install and adjust the drive belt.
(See page MA-4)
20. INSTALL PS PUMP
(a) Install the PS pump with the two bolts. Do not
tighten the bolts.
(b) Install the woodruff key, drive pulley with the plate
washer spring washer and mount nut.
(c) Install and adjust drive belt
(See page MA-4)
(d) Push on the drive belt to hold the pulley in place and
torque the pulley nut.
Torque: 480 kg-em (35 ft-lb, 47 N·m)