Toyota Land Cruiser 1988 Repair Manual page 70

Timing
Mark
ENGINE MECHANICAL- Timing Gears and Camshaft
EM-39
<(§>
~
SST
\
Upward
6
EM1490
EM1491
EM1492
EMt547
EM1350
DISASSEMBLY AND ASSEMBLY OF
CAMSHAFT AND CAMSHAFT TIMING
GEAR
1. DISASSEMBLE CAMSHAFT AND CAMSHAFT
TIMING GEAR
2.
(a) Using snap ring pliers, remove the snap ring.
(b) Using a socket wrench and press, press out
camshaft.
ASSEMBLE CAMSHAFT AND CAMSHAFT
TIMING GEAR
(a) Install the timing gear set key to the camshaft.
(b) Assemble the camshaft, thrust plate and timing gear
as shown.
(c) Using SST and a press, align the timing gear set key
with the key groove of the timing gear, and press in
the camshaft.
SST 09214-6001 0
(d) Using snap ring pliers, install the snap ring as
shown.
3.
CHECK CAMSHAFT THRUST CLEARANCE
(See page EM -38)
Thrust clearance: 0.200 - 0.290 mm
(0.0079- 0.0114 in.)