Toyota Land Cruiser 1988 Repair Manual page 185

Fl-54 EFI SYSTEM - Fuel System
INSTALLATION OF COLD START
INJECTOR
1. INSTALL COLD START INJECTOR
Install a new gasket and the injector with the two bolts.
Torque: 50 kg-em (43 in.-lb, 4.9 N·m)
2. INSTALL COLD START INJECTOR PIPE
Install the cold injector pipe with new four gaskets, the
two union bolts and pipe clamp bolt.
Torque:
Union bolt 180 kg-em (13 ft-lb, 18 N·m)
Clamp bolt 120 kg-em (9 ft-lb, 12 N·m)
3. CONNECT COLD START INJECTOR
CONNECTOR
4. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
5. CHECK FOR FUEL LEAKAGE (See page Fl-8)