Toyota 2005 Land Cruiser Owner's Manual

Toyota 2005 Land Cruiser Owner's Manual

Hide thumbs Also See for 2005 Land Cruiser:
Table of Contents

Advertisement

Foreword
Welcome to the growing group of value−conscious people who drive Toyotas. We are proud of the advanced engineering and
quality construction of each vehicle we build.
This Owner's Manual explains the operation of your new Toyota. Please read it thoroughly and have all the occupants
follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For
important information about this manual and your Toyota, read the following pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete
satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require.
If there is not a Toyota dealer near you, or you need emergency assistance for any reason, please call the following number:
U.S. OWNERS:
Toyota Customer Assistance Center
Toll−free:1−800−331−4331
D
Please leave this Owner's Manual in this vehicle at the time of resale. The next owner will need this information also.
All information and specifications in this manual are current at the time of printing. However, because of Toyota's policy of
continual product improvement, we reserve the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may
find some explanations for equipment not installed on your vehicle.
©
2004 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota
Motor Corporation.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2005 Land Cruiser and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toyota 2005 Land Cruiser

  • Page 1 When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require. If there is not a Toyota dealer near you, or you need emergency assistance for any reason, please call the following number: U.S. OWNERS: Toyota Customer Assistance Center Toll−free:1−800−331−4331...
  • Page 2: Important Information About This Manual

    Important information about this manual Safety and vehicle damage warnings Safety symbol Throughout this manual, you will see safety and vehicle dam- age warnings. You must follow these warnings carefully to avoid possible injury or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: CAUTION This is a warning against anything which may...
  • Page 3: Occupant Restraint Systems

    None of these systems, either indi- Toyota encourages you and your family to take the time vidually or together, can ensure that there is no injury to read Section 1−3 of this Owner’s Manual carefully.
  • Page 4: Event Data Recorder

    Toyota recommends you to read the provisions in Sec- D Engine speed tion 1−3 carefully and refer to them as needed during D Whether the brake pedal was applied or not your time of ownership of this vehicle.
  • Page 5 D New vehicle warranty data such as conversation between passengers. D Emission control systems warranty Toyota will not disclose the data recorded in an EDR to D Others a third party except when: For further information, please refer to the “Owner ’s D An agreement from the vehicle’s owner (or the leas-...
  • Page 6 Toyota information about your Toyota A wide variety of non−genuine spare parts and accesso- ries for Toyota vehicles are currently available in the CAUTION market. You should know that Toyota does not warrant these products and is not responsible for their perfor-...
  • Page 7 301 and traction control system, vehicle stability control system, 230. SRS airbag system and seat belt pretensioner system, be sure to check with your Toyota dealer for precaution- ary measures or special instructions regarding installa- tion.
  • Page 8: Driving Tips

    In addition, service shop or by your Toyota dealer before you dis- this vehicle has a higher ground clearance and center of pose of your vehicle.
  • Page 9: Table Of Contents

    ..........2 INFORMATION BEFORE DRIVING YOUR TOYOTA .
  • Page 11 WE REALLY CARE ABOUT YOU PLEASE BUCKLE UP Toyota has made a special effort to encourage use of seat belts. Toyota belts are: Comfortable Easy to use Convenient We encourage you to use your belts every time you drive.
  • Page 12 The Toyota authorized Repair Manual is packed with literally everything you need to know to perform your own maintenance in virtually every area of your new vehicle.
  • Page 13 The repair manual outlines exactly what main- The repair manual for LAND CRUISER may be tenance is required and clearly explains how to do the purchased from any Toyota dealer or the Mate- work yourself step−by−step. rial Distribution Center. To purchase the repair...
  • Page 14: Operation Of Instruments And Controls

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Overview of instruments and controls Instrument panel overview ........Instrument cluster overview .
  • Page 15: Instrument Panel Overview

    Instrument panel overview "View A 1. Side vents 2. Side defroster outlets 3. Instrument cluster 4. Center vents 5. Electric moon roof switches and/or personal lights 6. Glove box 7. Power door lock switches 8. Power window switches 9. Automatic transmission selector lever 10.
  • Page 16 "View B (Vehicles with navigation system) 1. Headlight, turn signal and front fog light switches 2. Cruise control switch 3. Ignition switch 4. Wiper and washer switches 5. Emergency flasher switch 6. Navigation system including air condi- tioning controls (See separate “Navigation System Owner’s Manual”.) 7.
  • Page 17 "View B (Vehicles without navigation system) 1. Headlight, turn signal and front fog light switches 2. Cruise control switch 3. Ignition switch 4. Wiper and washer switches 5. Emergency flasher switch 6. Clock, outside temperature and trip in- formation display 7.
  • Page 18 "Lower part of center cluster panel 1. Ashtray 2. Cigarette lighter 3. Power outlet...
  • Page 19 Instrument cluster overview 1. Voltmeter 4. Tachometer 7. Odometer and two trip meters 2. Speedometer 5. Engine oil pressure gauge 8. Trip meter reset knob 3. Service reminder indicators and 6. Engine coolant temperature gauge 9. Fuel gauge indicator lights...
  • Page 20 Indicator symbols on the instrument panel ∗ 1 ∗ 1 Brake system warning light Unengaged “Park” warning light Automatic transmission fluid temperature warning ∗ 1 Driver’s seat belt reminder light ∗ 1 light ∗ 1 Discharge warning light Turn signal indicator lights Engine oil replacement reminder light Headlight high beam indicator light Driving pattern (“POWER”...
  • Page 21 Vehicle stability control system off indicator ∗ 1 light Vehicle stability control system and active traction ∗ 1 control system warning light Active traction control system indicator light Slip indicator light ∗ 3 Roll sensing of curtain shield airbags off indicator light ∗...
  • Page 22: Keys And Doors

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys ............Engine immobilizer system .
  • Page 23: Keys

    When using a key containing a trans- 1. Master keys (black)—These keys work remote control key, see “Wireless remote ponder chip, observe the following in every lock. Your Toyota dealer will control” on page 13. precautions: need one of them to make a new key with a built−in transponder chip.
  • Page 24 z Do not use the key with electromag- netic materials. z When starting the engine, do not z Do not bend the key grip. use the key with other transponder z Do not cover the key grip with any keys around (including keys of oth- material that cuts off electromagnet- er vehicles) and do not press other ic waves.
  • Page 25: Engine Immobilizer System

    Toyota dealer. need additional keys, duplicates can be the electronic code in the chip corre- made by a Toyota dealer using the key The indicator light stays on except sponds to the registered ID code for number.
  • Page 26: Wireless Remote Control

    The MADE IN JAPAN indicator light will go off. This device complies with Part 15 of the For your Toyota dealer to make a new key FCC Rules. Operation is subject to the with a built−in transponder chip,...
  • Page 27 The wireless remote control key is an If you lose your wireless remote control electronic component. Observe the follow- key, contact your Toyota dealer as soon ing instructions in order not to cause dam- as possible to avoid the possibility of age and trouble to the key.
  • Page 28 NOTE: *The 2−step unlocking function can vehicle. be changed. **The turn signal lights can be set not to flash. Ask your Toyota deal- er for details.
  • Page 29 The alarm will last for 1 minute. To stop NOTICE: Connect the equipment into an outlet the alarm midway, push the “PANIC”, This equipment has been tested and on a circuit different from that to “LOCK” or “UNLOCK” switch, or unlock found to comply with the limits for a which the receiver is connected.
  • Page 30: Replacing Battery

    1. Remove the screw, and then the cover. 2. Remove module from z Replace only with same frame. equivalent type recommended by a Toyota dealer. z Dispose of used battery according to the local laws. Replace the battery by following these procedures:...
  • Page 31: Side Doors

    Take care not to lose the screws. door and twice in succession will unlock z Close the cover securely. all the side doors and back door simulta- neously.* NOTE: *The 2−step unlocking function can be changed. Ask your Toyota dealer for details.
  • Page 32 LOCKING UNLOCKING WITH POWER DOOR LOCK SWITCH Push the switch. To lock: Push the switch down on the front side. To unlock: Push the switch down on the l12093a rear side. All the side doors and back door lock or unlock simultaneously.
  • Page 33 —Automatic door locking and unlocking functions You can select the following modes of CAUTION the automatic locking and unlocking functions. The initial mode is mode 1. Before driving, be sure that the doors Mode 1—Automatic locking operation closed locked, especially linked to shift lever position when small children are in the ve- All doors are automatically locked when...
  • Page 34 SETTING FUNCTIONS 3. Within 10 seconds of turning the igni- To set the mode 4 (the automatic un- tion switch to the “ON” position, press locking operation linked to shift lever You can set the following functions by and hold the front of the driver’s side position): yourself.
  • Page 35: Power Windows

    Power windows Window lock switch 12C010a 12C011a l12088a The windows can be operated with the Automatic operation: Push the switch OPERATING THE PASSENGERS’ WIN- switch on each side door. completely down or pull it completely up, DOWS and then release it. The window will fully The power windows work when the ignition Use the switch on each passenger’s open or close.
  • Page 36 CAUTION To avoid serious personal injury, you must do the following. Before you close the power win- dows, always make sure there is 12C007b nobody around the power windows. must also make sure heads, hands and other parts of the bodies of all occupants are kept 12c012a completely...
  • Page 37: Power Quarter Windows

    Power quarter windows Never leave anyone (particularly a CAUTION small child) alone in your vehicle, especially with the ignition key still To avoid serious personal injury, you inserted. Otherwise, must do the following. could power window Before you close the power quarter switches and get trapped in a win- windows, always make sure there is dow.
  • Page 38: Back Door

    Back door LOCKING AND UNLOCKING WITH KEY Pull the handle toward you and pull LOCKING AND UNLOCKING FROM IN- down the lower side of the back door. SIDE Insert the key into the key hole and turn it. When closing the back door, make sure To lock: Push the knob.
  • Page 39 CAUTION Keep the back door closed while driving. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle. If the open back door hides the stop and tail lights, rear turn signal lights or rear retro reflectors while you are parked, other road users must be warned of the presence of...
  • Page 40: Hood

    Hood CAUTION Before driving, be sure that the back door is closed and locked, especially when small children are in the ve- hicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the ve- hicle during an accident.
  • Page 41: Theft Deterrent System

    Theft deterrent system The system will automatically be set after 30 seconds. When the system is set, the indicator light will start flashing again. 4. After making sure the indicator light starts flashing, you may leave the ve- hicle. Never leave anyone in the vehicle when you set the system, because unlocking from the inside will activate the system.
  • Page 42: Fuel Tank Cap

    If the system does not work properly, Turn the ignition key from the “LOCK” have it checked by your Toyota dealer. to “ON” position. Unlock any of the side doors or back door with the key or wireless remote control key.
  • Page 43 CAUTION Make sure the cap is installed se- curely to prevent fuel spillage in the event of an accident. Use only a genuine Toyota fuel tank 12C006b cap for replacement. It is designed to regulate fuel tank pressure. 1. To open the fuel filler door, pull the 2.
  • Page 44: Electric Moon Roof

    Electric moon roof To operate the moon roof, use the The roof will fully close. To stop the roof switches beside the personal light. partway, push the same switch or tilt switch. The moon roof works when the ignition switch is in the “ON” position. However, Tilting operation—...
  • Page 45 If the moon roof can- always make sure there is nobody function intentionally. not be operated properly, have it checked around the moon roof. You must by your Toyota dealer. The jam protection function may also make sure nobody places his work when...
  • Page 46: Occupant Restraint Systems

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Occupant restraint systems Seats ............Front seats .
  • Page 47: Seats

    Front seats— —Front seat precautions Seats While the vehicle is being driven, all ve- Driver seat Slightly recline the back of hicle occupants should have the seatback seat. Although vehicle designs vary, upright, sit well back in the seat and prop- CAUTION many drivers can achieve the 250 erly wear the seat belts provided.
  • Page 48 —Seat adjustment precautions Front passenger seat Front seats (with SRS side airbags) CAUTION CAUTION CAUTION Do not adjust the seat while the vehicle is moving as the seat may The SRS front passenger airbag also The SRS side airbags are installed in unexpectedly move and cause the deploys with considerable force, and the driver and front passenger seats.
  • Page 49: Adjusting Front Seats

    —Adjusting front seats 1. SEAT POSITION AND SEAT CUSHION CAUTION ANGLE ADJUSTING SWITCH Move the control switch in the desired Avoid reclining seatback direction. more than needed. The seat belts pro- Releasing the switch will stop the seat at vide maximum protection in a frontal that position.
  • Page 50: Armrest

    Rear seats— —Rear seat precautions Armrest Tumbling the seats will enlarge the lug- CAUTION gage compartment. See “Cargo and lug- gage” on page 230 for precautions when Do not adjust the seat while the loading luggage. vehicle is moving. Be careful that the seat does not hit a passenger or luggage.
  • Page 51 —Moving second seat —Adjusting second seats third seat entry SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the second seat passengers are sitting...
  • Page 52 —Tumbling second seat CAUTION After returning the seat, make sure the seat is securely locked by push- ing forward and rearward on the top of the seatback and by trying to pull up the edge of the bottom cushion. I13378b I13340a BEFORE TUMBLING SECOND SEAT 2.
  • Page 53 TUMBLING SECOND SEAT 2. Unlock the seat cushion. Swing the 3. Hook the strap. whole seat up and forward. 1. Lower the outer head restraint to the When returning the second seat to its lowest position and pull up the cen- original position, put the holding strap into ter head restraint.
  • Page 54 CAUTION When returning seats to their original position, observe the following pre- cautions in order to prevent personal injury in a collision or sudden stop: Make sure the seat is securely locked by pushing forward and rear- ward on the top of the seatback and by trying to pull up the edge of the bottom cushion.
  • Page 55 —Adjusting third seats —Tumbling third seats SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION I13377b Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the third seat passengers are sitting up...
  • Page 56 I13262c 2. Make sure the shoulder belt passes TUMBLING THIRD SEAT 2. Unlock the seat cushion and slide through the hanger when folding the the whole seat the rear−most 1. Lower the head restraint to the low- third seat. position while pulling up the handle. est position.
  • Page 57 13c558 13c559 13c557a 3. Swing the whole seat up. 4. Hook the strap. 5. Remove the seat hook covers from the back of the seat cushion, and When returning the third seat to its origi- install them over the seat hooks. nal position, put the holding strap into the hole.
  • Page 58 —Removing third seats CAUTION When returning seats to their original position, observe the following pre- cautions in order to prevent personal injury in a collision or sudden stop: Make sure the seat is securely locked by pushing forward and rear- ward on the top of the seatback and by trying to pull up the edge of the bottom cushion.
  • Page 59: Head Restraints

    Head restraints CAUTION When reinstalling the seat, be care- ful not to hit the seat against you When removing or reinstalling the or inside of the vehicle. seat, observe the following precau- Install each seat in the same posi- tions to prevent personal injury: tion from which it was removed.
  • Page 60: Seat Heaters

    Seat heaters For your safety and comfort, adjust the Right side CAUTION head restraint before driving. front seat To raise: Pull it up. Occupants must use caution when op- To lower: Push it down while pressing the erating the seat heater because it lock release button.
  • Page 61: Seat Belts

    Seat belts— —Seat belt precautions Toyota strongly urges that the driver and Do not allow any children to stand up or NOTICE passengers in the vehicle be properly re- kneel on either rear or front seats. An strained at all times with the seat belts...
  • Page 62 —Fastening 3−point seat belts CAUTION Be careful not to damage the belt webbing or hardware. Take care that Persons should ride in their seats they do not get caught or pinched properly wearing their seat belts in the seat or doors. whenever vehicle moving.
  • Page 63 If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from injury.
  • Page 64 CAUTION Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be l13197b kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause serious injuries in a collision.
  • Page 65 If the seat belt does not function Keep as low on hips as possible normally, immediately contact your Toyota dealer. Do not use the seat Sit up straight and well back in the Remove excess length of the belt and until the seat belt is fixed, because seat.
  • Page 66: Seat Belt Extender

    Toyota dealer free of charge. Please contact your local Toyota dealer so that the dealer can order the proper re- quired length for the extender. Bring the heaviest coat you expect to wear for prop- er measurement and selection of length.
  • Page 67 To connect the extender to the seat Toyota dealer. Do not use the seat belt, insert the tab into the seat belt until the seat belt is fixed, because buckle so that the “PRESS” signs on...
  • Page 68: Seat Belt Pretensioners

    —Seat belt pretensioners CAUTION Make sure the roll sensing of cur- tain shield airbags indicator light is not on. When the roll sensing of curtain shield airbags off switch is turned on (and the roll sensing of curtain shield airbags off indicator light is on), the seat belt pretensioners will not operate in a vehicle rollover and turning off the seat belt preten-...
  • Page 69 Failure to follow these instructions can result in death or serious inju- by the airbag sensor assembly. The airbag ries. Consult your Toyota dealer sensor assembly consists of a safing sen- about any repair and modification. sor and airbag sensor.
  • Page 70 If any of the following conditions occurs, NOTICE this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Do not perform any of the following Toyota dealer as soon as possible. changes without consulting your Toyota dealer.
  • Page 71: Srs Driver Airbag And Front Passenger Airbag

    In the following cases, contact your Toyota The SRS (Supplemental Restraint Sys- close proximity to the airbag which dealer as soon as possible:...
  • Page 72 The SRS front airbags will deploy if the child restraint system. Toyota severity of the impact is above the de- strongly recommends that all in- signed threshold level, comparable to an fants and children be placed in the...
  • Page 73 The front airbag sensors constantly moni- tor the forward deceleration of the vehicle. If an impact results in a forward decelera- tion beyond the designed threshold level, Hitting a curb, Falling into or the system triggers the airbag inflators. At edge of pavement jumping over a this time a chemical reaction in the inflat-...
  • Page 74 These Toyota strongly recommends that: er wears the seat belt even if not are usually in the nature of minor burns wearing it.
  • Page 75 “Child restraint” on page 76. Do not sit on the edge of the seat Toyota strongly recommends that all or lean against the dashboard when infants and children be placed in the vehicle is in use, since the...
  • Page 76 Do not put anything or any part of z Modification of the front end struc- Consult your Toyota dealer about any your body on or in front of the ture repair and modification.
  • Page 77 The light comes on or starts flashing while driving. The indicator comes on when the igni- In the following cases, contact your Toyota dealer as soon as possible: tion key is turned to the “ON” position. It goes off after about 6 seconds. This...
  • Page 78: Srs Side Airbags And Curtain Shield Airbags With Roll Sensing Function

    SRS side airbags and curtain shield airbags with roll sens- ing function In response to a severe side impact, the CAUTION SRS side airbags and curtain shield air- bags on impacted side work with the seat The SRS side airbag and curtain belts to help reduce injury by inflating.
  • Page 79 Toyota tion where the inflation is not desired strongly recommends that all in- (such as extreme−off road driving). fants and children be placed in the rear seats of the vehicle and prop- erly restrained.
  • Page 80 CAUTION Make sure the roll sensing of cur- tain shield airbags indicator light is not on. Collision from the rear When the roll sensing of curtain shield airbags off switch is turned on (and the roll sensing of curtain shield airbags off indicator light is Collision from the front on), the curtain shield airbags will not inflate in a vehicle rollover and...
  • Page 81 Collision from Collision from the front the rear The angle of Skidding vehicle vehicle tip−up hitting a curb is marginal stone Pitch end over end The curtain shield airbags may not in- The curtain shield airbags may inflate The curtain shield airbags are not gen- flate if the vehicle is subjected to a if the angle of vehicle tip−up is margin- erally designed to inflate if the vehicle...
  • Page 82 The SRS side airbag and curtain shield airbag system is controlled by the airbag sensor assembly. The airbag sensor as- sembly consists of a safing sensor and airbag sensor. In a severe side impact, the side and Falling into or jump- Hitting a curb, edge of 13c538b curtain shield airbag sensor and/or the...
  • Page 83 When the airbags inflate, they produce a CAUTION fairly loud noise and release some smoke and residue along with non−toxic gas. This SRS side airbags and curtain shield does not indicate a fire. This smoke may airbags inflate with considerable remain inside the vehicle for some time, force.
  • Page 84 Sit up straight and well back in the seat, distributing your weight evenly in the seat. Do not apply excessive weight to the outer side of the seats with a side airbag and to the front and rear pillar, front, center and rear garnish and roof interior 13c563 with the curtain shield airbag.
  • Page 85 Do not allow anyone to kneel on the passenger seat, facing the pas- senger’s side door, since the side airbag and curtain shield airbag could inflate with considerable speed and force. Otherwise, he/she may be killed or seriously injured. Special care should be taken espe- cially when you have a small child in the vehicle.
  • Page 86 Do not hook a hanger, heavy or Do not disassemble or repair the sharp pointed objects on the coat front and rear pillars and roof side hook. If the curtain shield airbags rails containing the curtain shield inflate, those items will be thrown airbags.
  • Page 87 Toyota dealer. Such changes can in- cidentally, resulting in death or seri- terfere with proper operation of the ous injury. For details, see “Roof SRS side airbag and curtain shield luggage carrier”...
  • Page 88 If any of the following conditions occurs, In the following cases, contact your Toyota this indicates a malfunction of the airbags dealer as soon as possible: or seat belt pretensioners. Contact your Any of the SRS side airbags and cur- Toyota dealer as soon as possible.
  • Page 89: Child Restraint

    Child restraint— —Child restraint precautions Toyota strongly urges the use of ap- Toyota strongly urges use of On vehicle with side airbags and propriate child restraint systems for proper child restraint system which curtain shield airbags, do not allow children.
  • Page 90: Child Restraint System

    —Types of child restraint system —Child restraint system A child restraint system for a small Child restraint systems are classified into Make sure you have complied with child or baby must itself be properly the following 3 types depending on the all installation instructions provided restrained on the seat with the lap por- child’s age and size.
  • Page 91 —Installation with 2−point type seat belt (A) Infant seat (C) Booster seat (A) INFANT SEAT INSTALLATION An infant seat must be used in rear− facing position only. (B) Convertible seat...
  • Page 92 1. Run the center lap belt through or Contact your Toyota dealer CAUTION around the infant seat following the immediately. Do not install the child instructions provided by its manufactur- restraint system on the seat until...
  • Page 93 2. While pressing the infant seat firmly 3. To remove the infant seat, press the CAUTION against the seat cushion and seatback, buckle release button. tighten the lap belt by pulling its free Push and pull the child restraint sys- end to hold the infant seat securely.
  • Page 94 (B) CONVERTIBLE SEAT INSTALLATION 1. Run the center lap belt through or CAUTION around the convertible seat following A convertible seat must be used in for- instructions provided ward−facing or rear−facing position de- Do not install a child restraint system manufacturer and insert the tab into pending on the age and size of the on the third seat if it interferes with...
  • Page 95 2. While pressing convertible seat Contact your Toyota dealer CAUTION firmly against the seat cushion and immediately. Do not install the child seatback, tighten the lap belt by pulling restraint seat on the seat until the...
  • Page 96 —Installation with 3−point type seat belt 13c564 13c565 3. To remove the convertible seat, press (A) INFANT SEAT INSTALLATION CAUTION the buckle release button. An infant seat must be used in rear− facing position only. Never install a rear−facing child re- straint system on the front passen- ger seat.
  • Page 97 1. Run the lap and shoulder belt through Contact your Toyota dealer Do not install a child restraint sys- or around the infant seat following the immediately. Do not install the child tem on the third seat if it interferes...
  • Page 98 2. Fully extend the shoulder belt to put it 3. While pressing the infant seat firmly CAUTION in the lock mode. When the belt is against the seat cushion and seatback, then retracted even slightly, it cannot let the shoulder belt retract as far as Push and pull the child restraint sys- be extended.
  • Page 99 13c566 13c567 4. To remove the infant seat, press the (B) CONVERTIBLE SEAT INSTALLATION CAUTION buckle release button and allow the A convertible seat must be used in for- belt to retract completely. The belt will ward−facing or rear−facing position de- Never install a rear−facing child re- move freely again and be ready to pending on the age and size of the...
  • Page 100 On vehicle with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillar, front, center or rear 13c568 garnish or roof interior from which 13c501b...
  • Page 101 1. Run the lap and shoulder belt through 2. Fully extend the shoulder belt to put it Contact your Toyota dealer or around the convertible seat following in the lock mode. When the belt is immediately. Do not install the child...
  • Page 102 3. While pressing convertible seat 4. To remove the convertible seat, press CAUTION firmly against the seat cushion and the buckle release button and allow the seatback, let the shoulder belt retract belt to retract completely. The belt will Push and pull the child restraint sys- as far as it will go to hold the convert- move freely again and be ready to tem in different directions to be sure...
  • Page 103 On vehicle with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillar, front, center or rear 13c569 garnish or roof interior from which 13c570...
  • Page 104 Always make sure the shoulder belt child from death or serious injury. is positioned across the center of Contact your Toyota dealer child’s shoulder. The belt should be immediately. Do not install the child kept away from child’s neck, but...
  • Page 105 —Using a top strap Symbol 13C001 Anchor brackets 2. To remove the child restraint system, Follow the procedure below for a child Use the anchor bracket located behind the press the buckle release button and restraint system that requires the use second seat on the floor to attach the top allow the belt to retract.
  • Page 106 13C003 13C005 13C004 TO USE THE ANCHOR BRACKET: 2. Fix the child restraint system with 4. Replace the head restraint. the seat belt. 1. Remove the head restraint. 3. Take off the cover, latch the hook onto the anchor bracket and tighten the top strap.
  • Page 107 —Installation with child restraint lower anchorages 13c571 13C532f 13C529 Most upright position The lower anchorages for the child re- CHILD RESTRAINT SYSTEM INSTALLA- 2. Take off the cover between the seat straint system interfaced with TION cushion and seatback and confirm FMVSS225 specification are installed in the position of the lower anchorages 1.
  • Page 108 Type A— CAUTION 3. Latch the hooks of lower straps onto the anchorages and tighten the lower When using the lower anchorages straps. for the child restraint system, be Type B— sure that there are no irregular ob- 13C009b jects around the anchorages or that 3.
  • Page 110: Steering Wheel And Mirrors

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Steering wheel and Mirrors Power tilt and telescopic steering wheel ......Outside rear view mirrors .
  • Page 111: Power Tilt And Telescopic Steering Wheel

    This feature can be set inoperative. Ask ries. your Toyota dealer.
  • Page 112: Outside Rear View Mirrors

    —Power rear view mirror control Outside rear view mirrors— CAUTION Do not adjust the mirror while the vehicle is moving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious inju- ries.
  • Page 113: Anti−Glare Inside Rear View Mirror

    Anti−glare inside rear view mirror— —Folding rear view mirrors NOTICE If ice should jam the mirror, do not operate the control or scrape the mir- ror face. Use a spray de−icer to free the mirror. 13C010 The rear view mirrors can be folded Adjust the mirror so that you can just backward for parking in compact areas.
  • Page 114 —Compass When the ignition key is inserted and turned on, the inside rear view mirror al- ways turns on in the “AUTO” mode. When the outside air temperature is low, it may take a little longer for the mirror to darken in response to the detection of 13c570 headlights.
  • Page 115 Pushing the “AUTO” button for longer NOTICE 3 seconds turns on or off the compass display. Do not put magnets or a metal object near the inside rear view mirror. Do- The compass may not show the correct ing this may cause malfunction of the direction in the following conditions: compass sensor.
  • Page 116 If the direction is displayed several sec- onds after adjustment, the calibration is finished. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. 13C015b Zone number L Hawaii is included in zone 6.
  • Page 117 Do not adjust the display while the If calibration cannot be performed because vehicle is moving. Be sure to adjust of the magnetized vehicle, etc., take your the display only when the vehicle is vehicle to Toyota dealer. stopped.
  • Page 118: Sun Visors

    Sun visors— —Vanity mirror To block out glare, move the sun visor. To block the glare from the front when the To use the vanity mirror, swing down main sun visor is swung down, swing the main sun visor and open the cover. To block out glare from the front—Swing down the second sun visor.
  • Page 120: Lights, Wipers And Defogger

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Lights, Wipers and Defogger Headlight and turn signals ........Emergency flashers .
  • Page 121: Headlight And Turn Signals

    NOTE: *The operating condition or sensi- tivity can be changed. Ask your Toyota dealer for details. HEADLIGHTS The automatic light control sensor is on the top of the passenger’s side instrument...
  • Page 122 “LOCK” but- ton on the wireless remote control key turns off the headlights. NOTE: *The time before turning off the lights can be changed. Ask your Toyota dealer for details. NOTICE To prevent the battery from being dis-...
  • Page 123: Emergency Flashers

    Emergency flashers Instrument panel light control NOTICE To prevent the battery from being dis- charged, do not leave the switch on longer than necessary when the en- gine is not running. To turn on the emergency flashers, To adjust the brightness of the instru- push the switch.
  • Page 124: Front Fog Lights

    Front fog lights Interior lights To turn on the interior light, slide the switch. The interior light switch has the following positions: “ON”—Keeps the light on all the time. “OFF”—Turns the light off. “DOOR”— —Center: Turn the light on when any of side doors and back door are opened.
  • Page 125: Personal Lights

    One front door will be closed with the lock knob pushed forward while the other doors are locked. NOTE: *The interior lights can be set not to come on or the duration of lighting can be changed. Ask your Toyota dealer for details. Center...
  • Page 126: Ignition Switch Light

    Ignition switch light Windshield wipers and washer To turn on the personal light, push the switch on 1 side. To turn the lights off, push the switch on 2 side. PERSONAL LIGHTS CUT OFF OPERA- TION When the ignition switch is “OFF” and any personal lights in the vehicle stay lighting on, the lights will cut off automatically after 30 minutes.
  • Page 127: Rear Window Wiper And Washer

    To squirt washer fluid on the rear window, blocked. If a nozzle becomes blocked, twist the knob upward or downward as far contact your Toyota dealer to have the as it will go (position 3 or 4). The knob vehicle serviced.
  • Page 128: Rear Window Defogger

    Rear window defogger Outside rear view mirror heaters Make sure you turn the defogger off when the surfaces are clear. Leaving the defog- ger on for a long time could cause the battery discharge, especially during stop−and−go driving. The defogger is not designed for drying rain water or for melt- ing snow.
  • Page 129 CAUTION Since the mirror surfaces can get hot, do not touch them when the mirror heater switch is on. Make sure you turn the mirror heaters off when the surfaces are clear. Leaving the mirror heaters on for a long time could cause the battery to discharge, especially during stop−and−go driving.
  • Page 130: Gauges, Meters And Service Reminder Indicators

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ..........Engine coolant temperature gauge .
  • Page 131: Fuel Gauge

    Fill the fuel tank immediately. The indicator lamp goes off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible. 15C004 It is not a malfunction even if the needle of the fuel gauge returns to “E”...
  • Page 132: Engine Oil Pressure Gauge

    If the engine oil pressure should stay be- low the normal range, pull off the road to a safe place and stop the engine immedi- ately. Call a Toyota dealer or qualified repair shop for assistance. Engine oil pressure may not build up when the engine oil level is too low.
  • Page 133: Voltmeter

    Voltmeter Tachometer NOTICE Do not let the indicator needle get into the red zone. This may cause severe engine damage. The voltmeter tells whether the battery The tachometer indicates engine speed is charged discharged. Check in thousands of rpm (revolutions per while the engine is running—the needle minute).
  • Page 134: Odometer And Two Trip Meters

    Odometer and two trip meters 3. Trip meter reset knob—Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push.
  • Page 135: Service Reminder Indicators And Warning Buzzers

    Service reminder indicators and warning buzzers If the indicator or buzzer comes on... Do this. If parking brake is off, stop immediately and contact Toyota dealer. (indicators and buzzer) Fasten driver’s seat belt. (indicators and buzzer) Fasten front passenger’s seat belt.
  • Page 136 If the indicator or buzzer comes on... Do this. Take vehicle to Toyota dealer immediately. Take vehicle to Toyota dealer. If brake system warning light is also on, stop immedi- ately and contact Toyota dealer. Close all side doors and back door.
  • Page 137 It is dangerous to continue driving Depressing the brake pedal repeatedly a safe place and contact your Toyota normally when the brake fluid level is may turn on the warning light and dealer.
  • Page 138 (c) Front Passenger’s Seat Belt the nearest Toyota dealer or repair shop. If the light is flashing, we recommend that minder Light you replace the engine oil at an early NOTICE The light acts as a reminder to have the opportunity depending on the driving and road condition.
  • Page 139 Have your vehicle the tank as soon as possible. after taking several driving trips. checked by your Toyota dealer as soon as If the lamp will not go off even after sev- possible. eral trips, contact your Toyota dealer as Even if the abnormality of the electronic soon as possible.
  • Page 140 Contact your After about 6 seconds, the light will go pretensioners have a problem. Toyota dealer as soon as possible to off. This means the system of the air- service the vehicle. bag and front seat belt pretensioners (i) “ABS”...
  • Page 141 Toyota dealer as soon If the light does not go off, call a Toyota as possible. However, it is no problem (j) Open Door Warning Light dealer or qualified repair shop for assis- that the “VSC/TRAC”...
  • Page 142: Trip Information Display

    If any service reminder indicator or warn- ing buzzer does not function as described Current fuel consumption above, have it checked by your Toyota The displayed cruise information values dealer as soon as possible. indicate the general driving condition and may not always reflect precise and actual conditions.
  • Page 143 Average vehicle speed Driving distance after engine starting Available driving range The average vehicle speed is calculated The driving distance after engine start- The available driving range is calcu- and displayed based on the total driv- ing is displayed. lated and displayed depending on the ing distance and the total driving time amount of remaining fuel.
  • Page 144 Average fuel consumption after re- Current fuel consumption fueling The current fuel consumption is calcu- The average fuel consumption after re- lated and displayed based on the driv- fueling calculated displayed ing distance and the fuel consumption based on the total driving distance and per 2 second interval with the engine the total fuel consumption after refuel- running.
  • Page 146: Ignition Switch, Transmission And Parking Brake

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Ignition switch, Transmission and Parking brake Ignition switch with steering lock ......Automatic transmission .
  • Page 147: Ignition Switch With Steering Lock

    Ignition switch with steering lock “ACC”—Accessories such as the radio operate, but the engine is off. If you leave the key in the “ACC” or “LOCK” position and open the driver’s door, a buzzer will remind you to remove the key. “LOCK”—Engine is off and the steering wheel is locked.
  • Page 148: Automatic Transmission

    Automatic transmission Selector lever position P: Parking, engine starting and key removal position R: Reverse position N: Neutral position D: Normal driving position (Shifting into overdrive position) 4: Position for engine braking (Shifting into overdrive not possible) 3,2: Position for more powerful engine braking L: Position for maximum engine braking "...
  • Page 149 Your automatic transmission has a shift 3. Release the parking brake and brake Shift into the “L” position. The trans- lock system to minimize the possibility of pedal. Depress the accelerator pedal mission will downshift to first gear incorrect operation. This means you can slowly for smooth starting.
  • Page 150 (c) Using “3”, “2” and “L” positions (d) Backing up NOTICE The “3”, “2” and “L” positions are used for 1. Bring the vehicle to a complete stop. z Be careful not to over-rev the en- strong engine braking as described pre- 2.
  • Page 151 If the four–wheel drive control is in the When towing a trailer, in order to main- For ordinary driving, Toyota recommends “N” position while the selector lever is in tain engine braking efficiency, do not using the Normal mode to improve fuel the “P”...
  • Page 152: Four-Wheel Drive System

    Four–wheel drive system— (a) Four–wheel drive contro l (i) If you cannot shift the selector le- Use the center differential lock system if ver out of “P” position your wheels get stuck in a ditch, or when you are driving on a slippery or bumpy If you cannot shift the selector lever from surface.
  • Page 153 “H” (high speed position, center differ- In this mode, the braking feeling that oc- The center differential lock system opera- ential unlocked): Lever at “H”, center dif- curs when the wheels are negotiating a tion is not completed within 5 seconds ferential lock button left out sharp corner is further reduced than in the while the cruise control system is set,...
  • Page 154 (b) Shifting procedure Use the “L” position of the automatic SHIFTING BETWEEN “H” (UNLOCKED) NOTICE AND “H” (LOCKED) transmission lever for maximum power and traction when your wheels get stuck For normal driving on dry and hard shift between unlock lock or when you drive down a steep incline.
  • Page 155: Parking Brake

    Parking brake Cruise control The cruise control allows you to cruise CAUTION the vehicle at a desired speed over about 40 km/h (25 mph) even with your Before driving, be sure the parking foot off the accelerator pedal. brake is fully released and the park- Your cruising speed can be maintained ing brake reminder light is off.
  • Page 156 CAUTION To help maintain maximum control of your vehicle, do not use the cruise control when driving heavy or varying traffic, or on slip- – pery (rainy, icy or snow covered) or winding roads. Avoid vehicle speed increases when driving downhill.
  • Page 157 If this is the case, contact your Toyota cancelled. To decrease the vehicle speed, dealer and have your vehicle inspected. reset to a slower speed with the cruise control lever or depress the brake pedal.
  • Page 158: Active Traction Control System

    If the “VSC/TRAC” warning light comes controlling the output of the brake and on, have your vehicle checked by your engine. Thus, the system assists driver Toyota dealer as soon as possible. control driving power wheels. When you turn the ignition...
  • Page 159 (The continuous buzzer sounds for about In the following cases, contact your Toyota snow tires or tire chains. Always 3 seconds.) At the time, the “VSC/TRAC”...
  • Page 160: Vehicle Stability Control System

    When replacing the tires or wheels, The system activates when the vehicle substitute for safe driving practices. contact your Toyota dealer. (See speed is about more than 15 km/h (9 Factors including speed, road con- “Checking and replacing tires” on mph).
  • Page 161 If the “VSC/TRAC” warning light and “VSC OFF” indicator light come on, have your vehicle checked by your Toyota dealer as soon as possible. However, there is no problem if the “VSC/TRAC” warning light comes on when the brake actuator tem- perature becomes high.
  • Page 162 “VSC OFF” indicator light come on, the vehicle stability control system is not op- erating, but there is no problem if you continue to drive. In the following cases, contact your Toyota dealer: The “VSC/TRAC” warning light, “VSC OFF” indicator light and slip indicator light do not come on after the ignition key is turned “ON”.
  • Page 164: Audio System

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Audio system Reference ..........Using your audio system .
  • Page 165: Reference

    —some basics Reference This section describes some of the basic SWITCHING BETWEEN FUNCTIONS features on Toyota audio systems. Some Push “AM·SAT”, “FM”, “TAPE” or “DISC” information may not pertain to your sys- if the system is already on but you want tem.
  • Page 166 Satellite tuner technology notice: TONE AND BALANCE You must enter into a separate service Toyota’s satellite radio tuners are awarded For details about your system’s tone and agreement with the XM radio in order to Type Approval Certificates from XM Satel-...
  • Page 167 The of the window tint, consult with quarter window. maximum extension length is 850 mm your Toyota dealer. (33.5 in.). Every time you turn the radio on, the antenna will extend to its previous posi- tion.
  • Page 168 YOUR COMPACT DISC PLAYER CAUTION When you insert a disc, gently push it in with the label side up. Before extending the antenna, confirm The discs set in the player are played that no one is close enough to get continuously, starting with disc number 1.
  • Page 169 —Controls and features Details of specific buttons, controls, and features are described in the alphabetical list that follows. 17c517d...
  • Page 170 The button number will appear on the *: Use of satellite radio requires XM tuner the discs will be automatically cancelled. display. and service. Contact your Toyota dealer for details. (Program) To tune in to a preset station: Push the button for the station you want.
  • Page 171 “AM” to switch from cassette or compact display. *: Use of satellite radio requires XM tuner disc operation to radio operation. To stop the tape while it is fast forward- and service. Contact your Toyota dealer AUDIO−TUNE Knob ing, push fast...
  • Page 172 After FM button your vehicle to your Toyota dealer. pushing the button, insert a compact disc. Push “FM” to turn on the radio and select DISC At this time, the indicators on both sides the FM band. “FM1” or “FM2” will appear of the slot are flashing.
  • Page 173 Loading multiple compact discs— RAND (Random) RDS (Radio Data System) display To load multiple compact discs, push and There are two random features—you can The radio will automatically switch to the hold (until you hear a beep when the au- either listen to the tracks on all the com- RDS mode to receive an RDS station dio system is on).
  • Page 174 The player will repeat all the tracks on the the surrounding antenna cable. See a another channel. disc you are listening to. When the disc Toyota certified dealer. “– – –”: The channel you selected is no ends, the player will automatically go back “UPDATING”: longer available.
  • Page 175 *: Use of satellite radio requires XM tuner XM satellite radio*— Compact Disc Player and service. Contact your Toyota dealer You can either scan the currently selected There are two scan features—you can ei- for details. channel category or scan only the preset...
  • Page 176 *: Use of satellite radio requires XM tuner After the beginning of the tape is the amount of channel separation to prev- and service. Contact your Toyota dealer reached, the player will automatically ent the weak signal from creating noise.
  • Page 177 : Use of satellite radio requires XM tun- If the entire disc or track title does not er and service. Contact your Toyota appear on the display, push and hold the If the entire the message is not displayed, dealer for details.
  • Page 178: Audio System Operating Hints

    *: Use of satellite radio requires XM tuner RADIO RECEPTION Each time you push the “ ” or “ ”, the and service. Contact your Toyota dealer Usually, a problem with radio reception program type changes as in the following: for details.
  • Page 179 *: Use of satellite radio requires XM tuner ened, and there is another strong station and service. Contact your Toyota dealer nearby on the FM band, your radio may for details. tune in the second station until the origi-...
  • Page 180 CARING FOR YOUR CASSETTE PLAYER Avoid using cassettes with a total play- If this equipment does cause harmful AND TAPES ing time longer than 100 minutes (50 interference to radio or television re- minutes per side). The tape used in For the best performance for your cas- ception, which can be determined by these cassettes is thin and could get...
  • Page 181 CARING FOR YOUR COMPACT DISC PLAYER AND DISCS The player is intended for use with 12 cm (4.7 in.) discs only. Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.
  • Page 182 NOTICE Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.
  • Page 183: Rear Seat Audio System

    Rear seat audio system (b) When the radio mode is selected “ ” button: Push this button to select a preset station on the preset but- ton of the front audio system. Each push of the button changes to the station with higher numbered preset button.
  • Page 184 *: Use of satellite radio requires XM tuner locate the song you want to hear. For and service. Contact your Toyota dealer details, see “SEEK TRACK button” on for details. page 163.
  • Page 185: Audio Remote Controls (Steering Switches)

    Push “+” to increase the *: Use of satellite radio requires XM tuner volume and “–” to decrease the volume. and service. Contact your Toyota dealer The volume continues to increase or de- for details. crease while the switch is being pressed.
  • Page 186 (c) When the “CD” or “DVD” mode is selected “ ” or “ ” switch: Use this switch to select a desired track or disc. Push this switch briefly to select a de- sired track. To select a desired disc, push and hold this switch until the desired number of the disc appears and you hear a beep.
  • Page 188: Air Conditioning System

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Front air conditioning system: Controls ..........Air flow selector settings .
  • Page 189: Front Air Conditioning System: Controls

    Front air conditioning system— —Controls 1. Temperature selector knob 2. “AUTO” button 3. Temperature display 4. Fan speed display 5. Air flow display 6. “MODE” button 7. “A/C” button 8. Front windshield button 9. Fan speed control button 10. Air intake control button 11.
  • Page 190 “AUTO” button “MAX COLD” appears when you adjust to maximum cooling, and “MAX HOT” ap- For automatic operation of the air condi- pears when you adjust to maximum warm- tioning, press the “AUTO” button. An indi- ing. cator light will illuminate to show that the automatic operation mode has been se- “OFF”...
  • Page 191 4. Floor/Windshield—Air flows mainly When the “A/C” button is not pressed in, from the floor vents and windshield pressing “MODE” button turns off the air vents. conditioning. It is recommended that you close the For details about air flow selector setting, lower vent.
  • Page 192 If this happens, take your ve- hicle to a Toyota dealer for service. Air intake control button Press the button to select the air source. An indicator light will illuminate to show which air intake mode is being selected.
  • Page 193: Air Flow Selector Settings

    —Air flow selector settings 17C001a “Instrument panel vents” described below.
  • Page 194: Operating Tips

    —Operating tips To cool off your Toyota after it has If following another vehicle on a dusty Heating been parked in the hot sun, drive with road, or driving in windy and dusty For best results, set controls to: the windows open for a few minutes.
  • Page 195 Air conditioning Defogging Defrosting For best results, set controls to: The inside of the windshield The outside of the windshield For best results, set controls to: For best results, set controls to: Fan speed—“AUTO” Temperature— To the desired Temperature— Towards high temperature Temperature—Towards high temperature temperature to heat;...
  • Page 196: Instrument Panel Vents

    —Instrument panel vents Center vents Lower vent If air flow control is not satisfactory, check the instrument panel vents. The instrument panel vents may be opened or closed as shown. For removing frost or fog, it is recom- mended that you close the lower vent when you use the “Floor”, the “Floor/Wind- shield”...
  • Page 197: Rear Air Conditioning System

    Rear air conditioning system— —Controls 1. Rear air conditioning on−off switch 2. “AUTO” button 3. Air flow selector 4. Fan speed selector 5. Temperature selector 6. “OFF” button 18c507a...
  • Page 198 Rear air conditioning on−off switch Temperature selector To turn the rear air conditioning on, press Move the lever to adjust the tempera- the “REAR” switch. To turn the rear air ture—to the right to warm, to the left to conditioning off, press the switch again. cool.
  • Page 199: Air Flow Selector Settings

    —Air flow selector settings 18c508 Warm air Cool air...
  • Page 200: Other Equipment

    SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Clock ............Outside temperature display .
  • Page 201: Clock

    Clock Outside temperature display When instrument panel lights turned on, the brightness of the time in- dication will be reduced. To reset the hour: Push the “H” button. The display indicates between the range To reset the minutes: Push the “M” button. of –22°F and 122°F.
  • Page 202: Rear View Monitor System

    When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change.
  • Page 203 AREA DISPLAYED ON SCREEN The area detected by the camera is limited. Objects which are close to Image is displayed approximately level either corner of the bumper or under on screen. the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orien- tation or road conditions.
  • Page 204 When water droplets are adhering to the camera, or when humidity is high (for example, when it rains) When foreign matter (for example, snow or mud) adheres to the camera lens 19C509 When the sun or the beam of head- lights is shining directly into the cam- era lens Check surroundings for safety.
  • Page 205: Cigarette Lighter And Ashtray

    Do not hold the cigarette lighter pressed the outlet may cause electrical fail- ure or short circuits. Use a Toyota genuine cigarette lighter or equivalent for replacement.
  • Page 206: Roll Sensing Of Curtain Shield Airbags Off Switch

    Roll sensing of curtain shield airbags off switch Instrument panel Rear console box The roll sensing of curtain shield airbags (Vehicles with navigation system) off switch can turn off the curtain shield airbags and front seat belt pre- tensioners in a vehicle rollover. This switch should only be used in a situa- tion where the inflation is not desired (such as extreme off−road driving).
  • Page 207: Rear Console Box

    Rear console box In a severe side impact, the curtain shield CAUTION airbags on impacted side will inflate even if the roll sensing function is turned off. Make sure the roll sensing of cur- If the ignition switch is turned to “ACC” or off indicator light tain shield airbags “LOCK”...
  • Page 208: Glove Box

    Glove box Garage door opener The battery side of the hand−held trans- mitter must be pointed away from the Buttons HomeLink during the programming pro- Indicator cess. light For Canadian users, follow the procedure in “Programming an entrance gate/Pro- gramming all devices in the Canadian market”.
  • Page 209 5. Test the operation of the HomeLink 1. Locate the “training” button on the ceil- Programming an entrance gate/Program- pressing the newly programmed button. ing mounted garage door opener motor. ming all devices in the Canadian market If programming a garage door opener, The exact location and color of the 1.
  • Page 210 FCC Rules and with RSS−210 of the IC security systems, home door locks or When programming the HomeLink Rules. Operation is subject to the fol- lighting, contact your authorized Toyota Universal Transceiver, you may be lowing two conditions: (1) This device dealer for assistance.
  • Page 211: Auxiliary Boxes

    Auxiliary boxes— To use the auxiliary boxes, open the lids as shown in the following illustra- tions. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the auxiliary box closed while driving. NOTICE Type A (luggage compartment) Type C (rear console)
  • Page 212: Cup Holders

    —First−aid kit holder —Warning reflector holder Cup holders The cup holder is designed for holding cups or drink−cans securely. To use them, observe the following illustra- tions. CAUTION Do not place anything else other than cups or drink−cans in the cup holder, such items...
  • Page 213 19C008 For front seats For front seat For second seats The cup holder can be adjusted to the To use a cup holder in the console box. size of cups by changing the separator 1. Open the console box lid. Pull down position or moving the separator arms.
  • Page 214: Card Holder

    Card holder Tie−down hooks For third seats (left−hand side) You can store a card in the slot as To secure your luggage, use the tie− shown in the illustration. down hooks as shown above. See “Cargo and luggage” on page 230 for precautions when loading luggage.
  • Page 215: Cargo Net Hooks

    Cargo net hooks Roof luggage carrier Side Cross knobs rails Upper knob Roof rails These hooks are designed to hang car- The roof luggage carrier consists of ADJUSTING THE POSITION OF CROSS go net. roof rails and sliding cross rails. RAILS: To hang the cargo net, use the cargo net 1.
  • Page 216 Follow the manufacture’s instructions and precautions when installing the attach- ments or their equivalent. CAUTION When you load cargo on the roof lug- gage carrier, observe the following: Place the cargo so that its weight is distributed evenly between the front and rear axles.
  • Page 217: Floor Mat

    Floor mat If driving for a long distance, on rough roads, or at high speeds, stop the vehicle now and then dur- ing the trip to make sure the cargo remains in its place. Do not exceed 70 kg (154 lb.) cargo weight on the roof luggage carrier.
  • Page 218: Coat Hooks

    Coat hooks To use the coat hook, push the hook. CAUTION Do not hook a hanger, heavy or sharp pointed object on the coat hook. If curtain shield airbags inflate, those items will be hurled away with great force or the curtain shield air- bags may not active correctly.
  • Page 220: Information Before Driving Your Toyota

    ........Your Toyota’s identification .
  • Page 221: Off−Road Vehicle Precautions

    Off−road vehicle precautions This vehicle belongs to the utility ve- CAUTION hicle class, which has higher ground clearance and narrower tread in relation Always observe the following precau- to the height of its center of gravity to tions to help minimize the risk of se- make it capable of performing in a wide rious personal injury or damage to variety of off−road applications.
  • Page 222: Break−In Period

    To help prevent gas station mix−ups, your hicle more sensitive side to the future economy and long life of Toyota has a smaller fuel tank opening. winds than an ordinary passenger your vehicle: The special nozzle on pumps with un- car. Slowing down will allow you Avoid full−throttle...
  • Page 223 10% ethanol or 15% Automotive manufacturers in the U.S., heavy knocking. If it is severe, this will MTBE. If you use gasohol in your Toyota, Europe and Japan have developed a lead to engine damage. be sure that it has an octane rating no low-...
  • Page 224: Fuel Pump Shut Off System

    Operation in foreign countries GASOLINE QUALITY The fuel pump shut off system stops sup- If you plan to drive your Toyota in plying fuel to the engine when the engine another country... In a very few cases, you may experience stalls or an airbag inflates upon collision.
  • Page 225: Three−Way Catalytic Converter

    The three−way catalytic converter is the z Use only unleaded gasoline. vehicle in for a check−up as soon emission control devices installed in as possible. Remember, your Toyota z Do not drive with an extremely low the exhaust system. dealer knows your vehicle and its fuel level;...
  • Page 226: Engine Exhaust Cautions

    It gases to be drawn into the vehicle. Toyota Maintenance Schedule. For can cause unconsciousness or even To allow proper operation of your scheduled maintenance information, death.
  • Page 227: Facts About Engine Oil Consumption

    (1.1 qt./600 miles, 0.9 Imp.qt/600 regularly. Toyota recommends that the oil by the high temperature combustion miles) level be checked every time you refuel gases during the combustion process.
  • Page 228: Iridium−Tipped Spark Plugs

    In this case, the brakes may not work ity. properly. If they do not work well, depress the brake pedal firmly. If the brake system warning light comes on, immediately stop your vehicle and contact your Toyota deal-...
  • Page 229 The brake system warning light may stay ANTI−LOCK BRAKE SYSTEM Depressing the brake pedal on slippery on for about 60 seconds after the ignition (with “ABS” warning light) road surfaces such as on a manhole cov- key is turned to “ON” position. It is nor- er, a steel plate at a construction site, The anti−lock brake system is designed mal if the light turns off after a while.
  • Page 230 CAUTION Anti−lock brake system is not de- signed to shorten the stopping dis- overestimate anti−lock tance: Always drive at a moderate brake system: Although the anti−lock speed and maintain a safe distance brake system assists in providing ve- from the vehicle in front of you. hicle control, it is still important to Compared with vehicles without an drive with all due care and maintain...
  • Page 231 Toyota dealer. When the “ABS” warning light is on (and Have your Toyota dealer perform the bed- In this case, not only the anti−lock the brake system warning light is off), the ding−down.
  • Page 232: Brake Pad Wear Limit Indicators

    Toyota CAUTION dealer as soon as possible. Expensive ro- tor damage can result if the pads are not Do not allow more than one person replaced when necessary. to get on the rear step bumper at a time.
  • Page 233: Limited−Slip Differential

    This is the primary identification number Use only a spare tire of the same for your Toyota. It is used in registering size, construction and load capacity the ownership of your vehicle. as the original tires on your Toyota because damage to the limited−slip...
  • Page 234: Engine Number

    —Engine number Theft prevention labels Suspension and chassis Your new vehicle carries theft preven- CAUTION tion labels which are approximately 56 mm (2.20 in.) by 16 mm (0.63 in.). Do not modify the suspension/chassis The purpose of these labels is to reduce with lift kits, spacers, springs, etc.
  • Page 235: Tire Information

    Tire information— —Tire symbols This illustration indicates typical tire symbols. 1. Tire size—For details, see “Tire size” on page 224. 2. DOT Tire Identification Number (TIN)—For details, see “DOT and Tire Identification Num- ber (TIN)” on page 223. 3. Tire ply composition and materi- als—Plies mean a layer of rubber−...
  • Page 236 —DOT and Tire Identification Number (TIN) 7. “TUBELESS” or “TUBE TYPE” The “DOT” symbol certifies that the —A tubeless tire does not have a tire conforms to applicable Federal tube inside the tire and air is direct- Motor Vehicle Safety Standards. ly filled in the tire.
  • Page 237 —Tire size —Name of each section of tire 20c506a 21A007a 21A006a This illustration indicates typical tire 1. Section width 1. Bead size. 2. Tire height 2. Sidewall 1. Tire (P=Passenger car, 3. Wheel diameter 3. Shoulder T=Temporary use) 4. Tread 2.
  • Page 238 150 would wear conditions on specified government purchasers of Toyota vehicles with in- one and a half (1−1/2) times as well test surfaces of asphalt and concrete. formation on uniform tire quality grad-...
  • Page 239 Temperature A, B, C—The tempera- ture grades are A (the highest), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 240 —Glossary of tire terminology Tire related term Meaning tire inflation pressure when the vehicle has been parked for at least 3 hours or more, or it has not been driven more than 1.5 km or 1 mile under that Cold tire inflation pressure condition the maximum cold inflation pressure to which a tire may be inflated and it is Maximum inflation pressure...
  • Page 241 Tire related term Meaning the combined weight of those installed regular production options weighing over 2.3 kg (5 lb.) in excess of those standard items which they replace, not pre- Production options weight viously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim Vehicle capacity weight the rated cargo and luggage load plus 68 kg (150 lb.) times the vehicle’s desig-...
  • Page 242 Tire related term Meaning the load on an individual tire that is determined by distributing to each axle Vehicle normal load on the tire its share of the curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1 that follows) and dividing by two Weather side the surface area of the rim not covered by the inflated tire Table 1–...
  • Page 243: Vehicle Load Limits

    Cargo and luggage— Vehicle load limits —Stowage precautions Vehicle load limits include total load Towing capacity: When stowing cargo and luggage in capacity, seating capacity, towing ca- 2948 kg (6500 lb.) or on the vehicle, observe the follow- pacity and cargo capacity. Follow the Towing capacity means the maximum ing: load limits shown below.
  • Page 244 —Capacity and distribution Cargo capacity depends on the to- NOTICE D Never allow anyone to ride in tal weight of the occupants. the luggage compartment. It is Do not load the vehicle beyond (Cargo capacity) = (Total load capac- not designed for passengers. the vehicle capacity weight giv- ity) –...
  • Page 245 4. The resulting figure equals the 379 kg – 176 kg = 203 kg. available amount of cargo and lug- (834 lb. – 388 lb. = 446 lb.) gage load capacity. For example, As shown in the above example, if the if the “XXX”...
  • Page 246: Types Of Tires

    Types of tires Determine what kind of tires your CAUTION vehicle is originally equipped with. Weight of removed 1. Summer tires third seat Even if the total load of occu- Summer tires are high−speed capabil- pant’s weight and the cargo load Cargo ity tires best suited to highway driving is less than the total load capac-...
  • Page 247 All season tires, however, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in acceleration and handling performance compared with summer tires in highway driving. The details about how to distinguish summer tires from all season tires are described on page 222.
  • Page 248: Starting And Driving

    SECTION STARTING AND DRIVING Before starting the engine ........How to start the engine .
  • Page 249: Before Starting The Engine

    How to start the engine— (a) Cranking hold function Before starting the engine (b) Before cranking 1. Check the area around the vehicle be- Once you turn the ignition key to “START” 1. Apply the parking brake firmly. fore entering it. position and release it, the cranking hold 2.
  • Page 250: Tips For Driving In Various Conditions

    To dry them, drive vehicle cautiously while lightly pressing the brake pedal with the park- ing brake applied. If they still do not work safely, pull to the side of the road and call a Toyota dealer for assistance.
  • Page 251: Off−Road Driving Precautions

    Off−road driving precautions When driving your vehicle off−road, please CAUTION Do not drive in excess of the speed observe the following precautions to en- limit. Even if the legal speed limit sure your driving enjoyment and to help Before driving off, make sure the permits it, do not drive over 140 prevent the closure of areas to off−road parking brake is fully released and...
  • Page 252 U.S. Forest Service and Bureau of NOTICE After driving through tall grass, Land Management mud, rock, sand, rivers, etc., check z If driving through water, such as that there is no grass, bush, paper, CAUTION when crossing shallow streams, rags, stone, sand, etc. adhering or first check the depth of the water trapped on the underbody.
  • Page 253: Winter Driving Tips

    See page 297 for recommended viscosity. selection. Leaving a heavy summer oil in your ve- “Toyota Super Long Life Coolant” is a mix- hicle during winter months may cause ture of 50% coolant and 50% deionized harder starting. If you are not sure about water.
  • Page 254: Dinghy Towing

    Ask your When parking, put the transmission into local Toyota dealer for further details be- “P” and block the front wheels. Do not fore towing. use the parking brake, or snow or water...
  • Page 255 CAUTION Trailer hitch assemblies have differ- ent weight capacities established by The maximum gross trailer weight the hitch manufacturer. Even though (trailer weight plus cargo weight) the vehicle may be physically capa- must never exceed 2948 kg ble of towing a higher weight, the (6500 lb.).
  • Page 256 The load on either the front or rear Never load the trailer with more Total trailer weight Tongue load axle resulting from distribution of weight in the back than in the the gross vehicle weight on both front. About 60% of the trailer load axles must not exceed the Gross should be in the front half of the Axle Weight Rating (GAWR) listed...
  • Page 257 NOTICE If you wish to install a trailer hitch, you Do not use axle−mounted hitches as should consult with your Toyota dealer. they can cause damage to the axle Use only a hitch recommended by the housing, wheel bearings, wheels or hitch manufacturer and the one which tires.
  • Page 258 The trailer BRAKES AND SAFETY CHAINS ball load rating should be printed on Toyota recommends trailers with the top of the ball. brakes that conform to any applica- 3. When mounted in the ball mount, the...
  • Page 259 TIRES CAUTION Ensure that your vehicle’s tires are properly inflated. Adjust the tire infla- If the total trailer weight exceeds tion pressure indicated below: 453 kg (1000 lb.), trailer brakes are tire inflation pressure, kPa (psi) required. Front 220 (32) Never tap into your vehicle’s hy- Rear 240 (35)
  • Page 260 Avoid jerky starts or sudden accelera- form to any applicable federal, state/ tion. Toyota recommends that you do not provincial or local regulations. If not, tow a trailer with a new vehicle or a Avoid jerky steering and sharp turns.
  • Page 261 Crosswinds and rough roads will ad- Because of the added load of the trail- When restarting out after parking on a versely affect handling of your vehicle er, your vehicle’s engine may overheat slope: and trailer, causing sway. Pay attention on hot days temperatures over 1.
  • Page 262: How To Save Fuel And Make Your Vehicle Last Longer, Too

    How to save fuel and make your vehicle last longer, too Improving fuel economy is easy–just take Avoid engine over-revving. Use a CAUTION it easy. It will help make your vehicle last gear position suitable for the road on longer, too. Here are some specific tips which you are travelling.
  • Page 263 Keep front wheels in proper CAUTION alignment. Avoid hitting the curb and slow down on rough roads. Improper Never turn off the engine to coast alignment not only causes faster tire down hills. Your power steering and wear but also puts an extra load on brake booster will not function with- the engine, which, in turn, wastes fuel.
  • Page 264: In Case Of An Emergency

    SECTION IN CASE OF AN EMERGENCY If your vehicle will not start ........If your engine stalls while driving .
  • Page 265: If Your Vehicle Will Not Start

    2. If the engine still will not start, it needs work, your key may be broken. Have the adjustment or repair. Call a Toyota key checked at your Toyota dealer. If 3. If the light is out, dim or goes out dealer or qualified repair shop.
  • Page 266 If the engine still will not start, it needs which is poisonous and corrosive. adjustment or repair. Call a Toyota dealer Wear protective safety glasses when or qualified repair shop for assistance. jump starting, and avoid spilling acid on your skin, clothing, or ve- hicle.
  • Page 267 JUMP STARTING PROCEDURE 1. If the booster battery is installed in Discharged battery Jumper cable another vehicle, make sure the vehicles are not touching. Turn off all unneces- sary lights and accessories. Booster When boosting, use the battery of battery matching or higher quality.
  • Page 268 If the cause of your battery discharging is not apparent (for example, lights left on), When making connections, you should have it checked at your Toyota avoid serious injury, do not lean over dealer. the battery or accidentally let the jumper cables or clamps touch any- thing except the correct battery termi- nals or the ground.
  • Page 269: If Your Engine Stalls While Driving

    CAUTION After arriving at a safe place, stop the vehicle and call a Toyota dealer for 2. If coolant or steam is boiling out of the If the engine is not running, the pow- assistance.
  • Page 270: If You Have A Flat Tire

    You should have it checked as 4. If the engine drive belt is broken or the soon as possible at your Toyota dealer. 5. Read the following instructions coolant is leaking, stop the engine im- mediately.
  • Page 271 NOTICE CAUTION D Make sure to set the jack prop- erly in the jack point. Raising Do not continue driving with a When jacking, be sure to observe the vehicle with jack improper- deflated tire. Driving even a the following to reduce the possi- ly positioned will damage the short distance can damage a bility of personal injury:...
  • Page 272 —Required tools and spare tire 1. Get the required tools and spare Turn the jack joint by hand. To remove the spare tire under the tire. luggage compartment: To remove: Turn the joint in direction 1 Tool bag 1 until the jack is free. 1.
  • Page 273 When connecting a jack handle exten- 2. Remove the access hole cover on 3. Insert the jack handle end into the sion with a jack handle end, use a the rear bumper with a flat−bladed lowering screw through the access jack handle to tighten the bolts on the screwdriver.
  • Page 274 —Blocking the wheel 4. After the tire is lowered completely When storing the spare tire, put it in 2. Block the wheel diagonally op- to the ground, remove the holding place with the outer side of the wheel posite the flat tire to keep the bracket as shown in the illustration.
  • Page 275 —Removing wheel ornament —Loosening wheel nuts CAUTION Never use oil or grease on the bolts or nuts. The nuts may loos- en and the wheels may fall off, which could cause a serious ac- cident. 3. Remove the wheel ornament. 4.
  • Page 276 —Positioning the jack JACK POINTS: Front—Under the frame side rail Left rear—Under the rear axle housing Right rear—Under the bracket on the rear axle housing Make sure the jack is positioned on a level and solid place. Put a jack handle, jack handle exten- sions, and jack handle end together as shown in the illustration.
  • Page 277 —Raising your vehicle NOTICE Tighten all the joints securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. When connecting a jack handle exten- 6. After making sure no one is in sion with another extension and a jack the vehicle, raise it high enough handle end, use a jack handle to tight- so that the spare tire can be...
  • Page 278 —Changing wheels To raise the vehicle, insert the jack handle end into the joint of the jack (it is a loose fit) and turn it clockwise with the handle, making sure the han- dle remains firmly fitted onto the jack handle end.
  • Page 279 —Reinstalling wheel nuts —Lowering your vehicle CAUTION Never use oil or grease on the bolts or nuts. Doing so may lead to overtightening the nuts and damaging the bolts. The nuts may loosen and the wheels may fall off, which could cause a seri- ous accident.
  • Page 280 —Reinstalling wheel ornament —After changing wheels Tighten each nut a little at a time in 11. Check the air pressure of the re- the order shown. Repeat the process placed tire. until all the nuts are tight. Adjust the air pressure to the specifi- cation designated on page 328.
  • Page 281: If Your Vehicle Becomes Stuck

    If your vehicle becomes stuck If your vehicle becomes stuck in snow, NOTICE CAUTION mud, sand, etc., then you may attempt to rock the vehicle free by moving it forward If you rock your vehicle, observe the Before driving, make sure all the and backward.
  • Page 282: If Your Vehicle Needs To Be Towed

    If towing is necessary, we recommend (a) Towing with wheel lift type truck (a) Towing with wheel lift type truck— you have it done by your Toyota dealer Use a towing dolly under the wheels not or a commercial tow truck service. In —From front...
  • Page 283: Emergency Towing

    (c) Towing with sling type truck If towing is necessary, we recommend z Do not use front and rear eyelets. you to have it done by your Toyota It is not designed for towing. NOTICE dealer or a commercial tow truck ser- z Use only a cable or chain specifi- vice.
  • Page 284 If the towing vehicle can hardly move, do not forcibly continue the towing. Contact your Toyota dealer or a commercial tow truck service for assistance. Tow the vehicle as straight ahead as possible.
  • Page 285: If You Cannot Shift Automatic Transmission Selector Lever

    6. Start the engine. For your safety, 2. Pry up the cover with a flat−bladed keep the brake pedal depressed. screwdriver or equivalent. Be sure to have the system checked by your Toyota dealer as soon as possible.
  • Page 286: If You Lose Your Keys

    Toyota dealer if you can give them the key number and master key. Even if you lose only one key, contact your Toyota dealer to make a new key. If you lose all your master keys, you cannot make new keys; the whole engine immobi- lizer system must be replaced.
  • Page 288: Corrosion Prevention And Appearance Care

    ......Washing and waxing your Toyota ......
  • Page 289 Now, it is up to be dry. to see all the mud and dirt. It will do you. Proper care of your Toyota can help more harm than good to simply wet the High ambient temperatures can cause ensure long−term corrosion prevention.
  • Page 290 Washing and waxing your Toyota Check the interior of your vehicle. Wa- Washing your Toyota 1. Rinse off loose dirt with a hose. Re- ter and dirt can accumulate under the move any mud or road salt from the Keep your vehicle clean by regular floor mats and could cause corrosion.
  • Page 291 4. To prevent water spots, dry the vehicle precautions. Be sure to polish and wax ing your Toyota through an automatic using a clean soft cotton towel. Do not the chrome trim as well as the paint.
  • Page 292: Cleaning The Interior

    Cleaning the interior 3. Wax the vehicle again when water Vinyl interior CAUTION does not bead but remains on the sur- The vinyl upholstery may be easily face in large patches. cleaned with a mild soap or detergent Vehicles with side airbags and cur- and water.
  • Page 293 Carpets NOTICE NOTICE Use a good foam−type shampoo to z Do not use dye or bleach on the z Do not use organic substances (sol- clean the carpets. belts—it may weaken them. vents, kerosene, alcohol, gasoline, Begin by vacuuming thoroughly to remove etc.) or alkaline or acidic solutions.
  • Page 294 If you have any questions about the leather these could cleaning of your Toyota, your local cause discoloring. Toyota dealer will be pleased to answer them. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather.
  • Page 296: Vehicle Maintenance And Care

    SECTION VEHICLE MAINTENANCE AND CARE Maintenance requirements ........General maintenance .
  • Page 297: Maintenance Requirements

    See “Owner’s War- form them are presented in Section 7. or if you prefer, your Toyota dealer will be ranty Information Booklet” or “Owner’s pleased to do them at a nominal cost.
  • Page 298: General Maintenance

    Radiator, condenser and hoses Supplement” for the details. vehicle to your Toyota dealer or a quali- Check that the front of the radiator and fied service shop immediately. It is recom- condenser are clean and not blocked with mended that any problem you notice be leaves, dirt, or insects.
  • Page 299 Exhaust system Seats Parking brake If you notice any change in the sound of Check that all front seat controls such as Check that the lever has the proper travel the exhaust or smell exhaust fumes, have seat adjusters, seatback recliner, etc. op- and that, on a safe incline, your vehicle the cause located and corrected immedi- erate smoothly and that all latches lock...
  • Page 300: Does Your Vehicle Need Repairing

    If you notice any of these clues, take your tant clues are as follows: month. See page 301 for additional vehicle to your Toyota dealer as soon as information. Engine missing, stumbling, or pinging possible. It probably needs adjustment or repair.
  • Page 301: Emissions Inspection And Maintenance (I/M) Programs

    Toyota dealer comes on. In this case, your vehicle may to prepare the vehicle for re−testing. not pass the I/M test and need to be repaired.
  • Page 302: Do−It−Yourself Maintenance Introduction

    SECTION − DO−IT−YOURSELF MAINTENANCE Introduction Engine compartment overview ....... Fuse locations .
  • Page 303: Engine Compartment Overview

    Engine compartment overview 1. Engine oil filler cap 2. Brake fluid reservoir 3. Fuse block 4. Battery 5. Windshield and rear window washer fluid tank 6. Engine oil level dipstick 7. Condenser 8. Radiator 9. Engine coolant reservoir 10. Power steering fluid reservoir...
  • Page 304: Fuse Locations

    Fuse locations Spare fuses Spare fuses...
  • Page 305: Do−It−Yourself Service Precautions

    Right after driving, engine warranty coverage. Read separate automatically start to run if the air compartment—the engine, radiator, Toyota Warranty statement for details and conditioning is on. exhaust manifold, power steering suggestions. Use eye protection whenever you fluid reservoir spark...
  • Page 306: Parts And Tools

    Remember all Toyota parts are de- trode. Do not dispose of used oil and fil- signed in metric sizes, so your tools must...
  • Page 307 Tools: CHECKING AND REPLACING FUSES Funnel (only for adding coolant) Parts (if replacement is necessary): CHECKING BRAKE FLUID Fuse with same amperage rating as original Parts (if level is low): ADDING WASHER FLUID SAE J1703 or FMVSS No.116 DOT 3 brake fluid Parts: Tools:...
  • Page 308: Engine And Chassis

    SECTION − DO−IT−YOURSELF MAINTENANCE Engine and Chassis Checking the engine oil level ....... . . Checking the engine coolant level .
  • Page 309: Checking The Engine Oil Level

    Checking the engine oil level NOTICE Low level Full level Be careful not to drop engine oil on the vehicle components. If the oil level is below or only slightly above the low level, add engine oil of the same type as already in the engine. Remove the oil filler cap and add engine oil in small quantities at a time, checking Add oil...
  • Page 310 ENGINE OIL SELECTION SAE 5W−30 is the best choice for good fuel economy, and good starting in cold “Toyota Genuine Motor Oil” is used in weather. your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent If SAE 5W−30 oil is not available, SAE to satisfy the following grade and viscos- 10W−30 oil may be used.
  • Page 311: Checking The Engine Coolant Level

    Mark is displayed on the front of cock and water pump. Toyota engines. the container. If you can find no leak, have your Toyota Please contact your Toyota dealer for fur- dealer test the cap pressure and check ther details about “Toyota Genuine Motor for leaks in the cooling system.
  • Page 312: Checking The Radiator And Condenser

    If any of the above parts are extremely dirty or you are not sure of their condi- Use of improper coolants may damage tion, take your vehicle to a Toyota dealer. your engine cooling system. Only use “Toyota Super Long Life Coolant”...
  • Page 313: Checking Brake Fluid

    Checking brake fluid If the level is low, add SAE J1703 or NOTICE FMVSS No. 116 DOT 3 brake fluid to the brake reservoir. If you spill the fluid, be sure to wipe it off to prevent it from damaging the Refilling brake fluid: parts or painting.
  • Page 314: Checking Power Steering Fluid

    Checking tire inflation pres- sure Checking power steering fluid Clean all dirt from outside of the reservoir tank and look at the fluid level. If the fluid is cold, the level should be in the “COLD” If cold range. Similarly, if it is hot, the fluid level If hot O.K.
  • Page 315 Keep your tire inflation pressures D Always use a tire inflation pres- Tire inflation at the proper level. sure gauge. The appearance of pressure gauge a tire can be misleading. Besides, The recommended cold tire inflation tire inflation pressures that are pressures, tire sizes and the com- even just a few pounds off can de- bined weight of occupants and cargo...
  • Page 316 D A greater possibility of tire waste fuel, reduce the comfort of driv- damage from road hazards ing, reduce tire life and make your ve- hicle less safe to drive. If a tire frequently needs refilling, have it checked by your Toyota deal-...
  • Page 317: Checking And Replacing Tires

    Checking and replacing tires The tires on your Toyota have built−in If air loss occurs while driving, do not Tread wear indicator tread wear indicators to help you continue driving. Driving even a short know when the tires need replace- distance can damage a tire beyond ment.
  • Page 318 Using any other size or type of tire Toyota recommends all four tires, CAUTION may seriously affect handling, ride, or at least both front or rear tires speedometer/odometer calibration, be replaced as a set. Observe the following instruc- ground clearance, and clearance be- See “If you have a flat tire”...
  • Page 319: Rotating Tires

    To equalize tire wear and help ex- Do not use tires other than those men- tend tire life, Toyota recommends tioned above. Do not install studded tires that you rotate your tires accord- without first checking local regulations for ing to the maintenance schedule.
  • Page 320 SNOW TIRE INSTALLATION CAUTION Side chain Snow tires should be installed on all wheels. Observe following instructions. Installing snow tires on the rear wheels Otherwise, an accident may occur re- only can lead to an excessive difference sulting in death or serious injuries. in road grip capability between the front Do not use snow tires other than and rear tires which could cause loss of...
  • Page 321: Replacing Wheels

    When installing chains on your tires, care- Correct replacement wheels are available When driving with chains installed, fully follow the instructions of the chain at your Toyota dealer. be sure to drive carefully. Slow manufacturer. down before...
  • Page 322: Aluminum Wheel Precautions

    Otherwise, an accident may occur re- sulting in death or serious injuries. When balancing your wheels, use only Toyota balance weights or equivalent Do not use wheels other than the and a plastic or rubber hammer. manufacturer’s recommended size,...
  • Page 324: Electrical Components

    SECTION − DO-IT-YOURSELF MAINTENANCE Electrical components Checking battery condition ........Battery recharging precautions .
  • Page 325: Checking Battery Condition

    Checking battery condition— —Precautions —Checking battery exterior CAUTION If electrolyte gets on your skin, Ground cable Terminals thoroughly wash the contact area. If BATTERY PRECAUTIONS you feel pain or burning, get medi- cal attention immediately. The battery produces flammable and explosive hydrogen gas.
  • Page 326: Battery Recharging Precautions

    To return the moon roof to normal, Have battery Dark White see “Electric moon roof” on page 31. checked by your NOTICE Toyota dealer. Never recharge the battery while the Clear or Have battery engine is running. Also, be sure all light checked by your accessories are turned off.
  • Page 327: Checking And Replacing Fuses

    Checking and replacing fuses Type A fuses can be pulled out by the pull−out tool. The location of the pull−out tool is shown in the illustration. Type A If you are not sure whether the fuse has blown, try replacing the suspected fuse with one that you know is good.
  • Page 328: Adding Washer Fluid

    Add washer gain access to the bulbs. When replacing tem. Have your Toyota dealer correct it as fluid. a bulb, make sure the ignition switch and soon as possible.
  • Page 329 — inside of the lens, or if there is water Type B — pooled inside light, contact your Glove box light — Toyota dealer. Door courtesy — Bulb lights Light bulbs Type 1. Open the hood. Vanity lights — Headlights LEFT–HAND HEADLIGHT: Remove the...
  • Page 330 If the connector is tight, wiggle it. LEFT–HAND HEADLIGHT: Install washer inlet securely. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
  • Page 331 If the connector is tight, wiggle it. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
  • Page 332 —Front turn signal and front side marker lights —Parking lights – – Use a Phillips head screwdriver. Use a Phillips head screwdriver.
  • Page 333 —Stop and tail lights Use a Phillips–head screwdriver.
  • Page 334 —Rear turn signal, stop/tail, and back–up lights —License plate lights Use a flat−bladed screwdriver. a: Back–up light b: Rear turn signal light c: Stop/tail light...
  • Page 336: Specifications

    SECTION SPECIFICATIONS Dimensions and weights ........Engine .
  • Page 337: Dimensions And Weights

    Dimensions and weights Engine Fuel Overall length mm (in.) 4890 (192.5) Model: Fuel type: 2UZ−FE Unleaded gasoline, Octane Rating 87 Overall width mm (in.) 1940 (76.4) (Research Octane Number 91) or higher. Type: ∗ 1 Overall height mm (in.) 1875 (73.8) For improved vehicle performance, the 8 cylinder V type, 4 cycle, gasoline Wheelbase...
  • Page 338: Service Specifications

    Coolant type: DENSO SK20R11 “Toyota Super Long Life Coolant” is used IFR6A11 in your Toyota vehicle at factory fill. In Spark plug gap, mm (in.): order to avoid technical problems, only use 1.1 (0.043) “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non−sili-...
  • Page 339 No.2 or Molybdenum—disulfide lithium Hypoid gear oil API GL−5 changing automatic transmission base chassis grease, NLGI No.2 fluid, use only “Toyota Genuine ATF Recommended oil viscosity: WS” (ATF JWS3324 or NWS9638) to aid Above –18_C (0_F) in assuring maximum transmission per- SAE 90 formance.
  • Page 340 BRAKES Minimum pedal clearance when depressed with the force of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): 116 (4.6) Pedal free play, mm (in.): 1 – 6 (0.04 – 0.24) Pad wear limit, mm (in.): 1.0 (0.04) Lining wear limit, mm (in.): 1.0 (0.04)
  • Page 341: Tires

    Tires Tire size and inflation pressure: kPa (psi) Front Rear Tire size Wheel size Normal driving Trailer towing Normal driving Trailer towing P275/60R18 111H 200 (29) 220 (32) 220 (32) 240 (35) Wheel nut torque, N·m (kgf·m, ft·lbf): 131 (13.4, 96.6) NOTE: For a complete information on tires (e.g.
  • Page 342: Fuses

    Fuses Engine compartment Left side kick panel Right side kick panel Fuses 8. HAZ−TRN 15 A: 18. BAT 30 A: Emergency flashers, All components in “ECU−B2” Turn signal lights 1. ABS NO.2 40 A: Anti−lock brake sys- 19. TEL 7.5 A: No circuit 9.
  • Page 343 26. HEAD (LH−LWR) 10 A: 42. DBL LOCK 15 A: 62. GAUGE2 10 A: Back−up lights Left−hand head- Double lock system light (low beam) 43. A/C 15 A: 63. MET 7.5 A: Gauges and meters Air conditioning system 27. HEAD (RH−UPR) Right−hand 44.
  • Page 344: Reporting Safety Defects For U.s. Owners And Uniform Tire Quality Grading

    SECTION REPORTING SAFETY DEFECTS FOR U.S. OWNERS AND UNIFORM TIRE QUALITY GRADING Reporting safety defects for U.S. owners ..... .
  • Page 345 However, NHTSA cannot become involved in individual prob- lems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.
  • Page 346: Index

    SECTION INDEX...
  • Page 347 Break−in tips ......Protecting your Toyota Coolant level ..... .
  • Page 348 Do−it−yourself maintenance Emergency, In case of Parts and tools ..... Blown fuse ......Facts about engine oil consumption .
  • Page 349 Tank cap ......Indicator symbols ..... . Front turn signal lights .
  • Page 350 ....Seat adjustment precautions Protecting your Toyota Front seats ......
  • Page 351 Suspension and chassis ....Turn signals ......Switch Tachometer .

This manual is also suitable for:

Land cruiser 2006

Table of Contents