Mazda RX-8 Manual page 569

2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver
compartment.
3. Monitor the OBD-II systems operating status using the WDS or equivalent.
PID/DATA Monitor and Record Procedure
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver
compartment.
3. Access and monitor PIDs using the WDS or equivalent.
Diagnostic Monitoring Test Results Access Procedure
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver
compartment.
3. Access to the diagnostic monitoring test results and read the test results using the WDS or equivalent.
(w) Engine Diagnostics & Control
Page 6