Renault Laguna III Manual page 2940

Engine wiring: Removal - Refitting
K9K or M9R
a Remove the nut (60) from the engine wiring retaining
ring.
a Unclip the cooling hose at (61) .
a Remove the cooling hose.
a Remove the upper nuts (62) on the gearbox.
a Move aside the gearbox wiring channel.
WIRING HARNESS
123532
125860
88A-34
a Remove the wiring bolts (63) on the front left-hand
side member.
a Disconnect:
- the refrigerant pressure sensor connector (64) ,
- the engine cooling fan assembly resistor connector
(65) ,
- the engine cooling fan assembly connector (66) .
a Unclip the engine cooling fan assembly wiring.
88A
125834
125658