Renault Laguna III Manual page 2936

Engine wiring: Removal - Refitting
K9K or M9R
- the injection rail protector cover,
a Disconnect:
- the exhaust gas pressure sensor connector (13) ,
- the injector connectors (14) ,
- the diesel temperature sensor connector (15) ,
- the air flowmeter connector (16) ,
- the turbocharging pressure regulation solenoid
valve connector (17) ,
- the high pressure pump connector (18) ,
- the heater plug connectors (19) ,
- the damper valve connector (20) ,
WIRING HARNESS
88A-30
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
WARNING
To prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
M9R
- the turbocharger pump sensor connector (21) ,
- the camshaft position sensor connector (22) ,
- the rail pressure sensor connector (23) ,
- the exhaust gas recirculation solenoid valve con-
nector (24) ,
- the coolant temperature sensor connector (25) ,
- the alternator connectors (26) ,
- the air conditioning compressor connectors (27) ,
- the oil pressure sensor connector (28) ,
- the starter connectors (29) ,
88A
125674