Renault Laguna III Manual page 3093

B91 or D91 or K91
2 - Position of rear attachment point
Fully screw in the towing ring supplied in the onboard
vehicle tool kit located in the luggage compartment in-
side the emergency spare wheel.
II - LIFTING POINT USING A TROLLEY JACK
IMPORTANT
To prevent any accidents, the trolley jack must only
be used to lift and/or move the vehicle. The vehicle
height must be maintained with axle stands which
are strong enough to support the weight of the vehi-
cle.
WARNING
To avoid any damage to the original protection, use
equipment fitted with rubber pads to prevent the
equipment coming into direct contact with the vehi-
cle.
To avoid any damage to the axle assemblies, the
vehicle must not be raised using the front suspen-
sion arms for support or under the rear axle.
LIFTING EQUIPMENT
Vehicle: Towing and lifting
122657
To place the vehicle on axle stands:
- front:
• raise the vehicle under the front side cross member
at (4) and place the axle stand under the jacking
point at (5) ,
- rear:
• raise the vehicle under the rear axle mechanism
bearing at (6) and place the axle stand under the
jacking point at (7) .
02A-2
02A
128237
128236