Teledyne API – Model T700 Dynamic Dilution Calibrator
Principles of Operation
10.6.3. O3 GENERATOR – ELECTRONIC OPERATION
Electronically the O
generator and its subcomponents act as peripheral devices operated
3
by the CPU via the motherboard. Sensors, such as the UV lamp thermistor send analog
data to the motherboard, where it is digitized. Digital data is sent by the motherboard to
the calibrator's CPU and where required stored in either flash memory or on the CPU's
Disk-on-Module. Commands from the CPU are sent to the motherboard and forwarded
2
to the various devices via the calibrators I
C bus.
Figure 10-14: O
Generator – Electronic Block Diagram
3
295
06873B DCN6388