The Generate Step - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.3.2.1. The GENERATE Step

Note
132
This step operates and is programmed similarly to the GENERATE  AUTO.
At the end of the programming sequence, the T700 firmware will automatically insert a
DURATION step that needs to be defined.
To insert a GENERATE step into a sequence, press:
If the user attempts to generate a source gas type that has not been entered into
the T700's gas library, the sequence will freeze and after a certain time-out
period, stop running.
Teledyne API – Model T700 Dynamic Dilution Calibrator
06873B DCN6388